[Samba] unable to upload printer driver

[Franz Gansberger]

Hi Achim,

thank you for your effort!
I did a couple of tests, from W8.1 with x64 driver which where rather old and therefore disignated for W7x64. But this went stale as well.
Therefore I'll give it a try by using a W7-WS for uploading the drivers.

Franz



>>> Achim Gottinger <achim at ag-web.biz> 06.06.2017 15:27 >>>
Hmm after another try an windows 7 client 32 and 64 bit can install such 
an driver now. Sorry for the noise. :-)


Am 06.06.2017 um 15:10 schrieb Achim Gottinger via samba:
> Please ignore the recommendation, such an driver can not be assigned 
> to an printer.
>
> Am 06.06.2017 um 14:54 schrieb Achim Gottinger via samba:
>> I can install Kyocera Universal KPDL drivers once i delete the sections:
>>
>> [PrinterPackageInstallation.x86]
>> PackageAware=TRUE
>> CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F1}
>>
>> [PrinterPackageInstallation.amd64]
>> PackageAware=TRUE
>> CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F1}
>>
>> in the OEMSETUP.inf file.
>>
>> But editing the file invalidates signing.
>>
>> Am 06.06.2017 um 12:59 schrieb Franz Gansberger via samba:
>>> Hi Louis,
>>>
>>> thank you for your answer.
>>>
>>> - the link was already there
>>> - I followed this hints:
>>> https://lists.samba.org/archive/samba/2016-November/204773.html

>>> did the chmod 2775
>>> administrator is part of the PrintOperatorGroup
>>> net rpc rights list privileges SePrintOperatorPrivilege -U 
>>> "H955\administrator"
>>>
>>> getfacl printerdrivers
>>> # file: printerdrivers
>>> # owner: root
>>> # group: H955\134domain\040admins
>>> # flags: -s-
>>> user::rwx
>>> user:root:rwx
>>> user:3000003:r-x
>>> user:H955\134domain\040admins:rwx
>>> group::rwx
>>> group:3000003:r-x
>>> group:H955\134domain\040admins:rwx
>>> mask::rwx
>>> other::---
>>> default:user::rwx
>>> default:user:root:rwx
>>> default:user:3000003:r-x
>>> default:user:H955\134domain\040admins:rwx
>>> default:group::---
>>> default:group:3000003:r-x
>>> default:group:H955\134domain\040admins:rwx
>>> default:mask::rwx
>>> default:other::---
>>>
>>> Now I found this post:
>>> https://groups.google.com/forum/#!msg/linux.samba/9BptH0lYLSk/D7pBaYnoDgAJ 

>>>
>>>
>>> Herr I tried the printui /s /t2  - had an ver4.
>>> Now I found an relative old driver for the Kyocera FS-C5150 (windows 
>>> 7 x64, ver3), and installed it successfully local.
>>> But nontheless putting that on the share on samba failes again?!
>>>
>>> Also - some of the ancient driver (HP4050, HP4250) which are the 
>>> easyest one (did that manually on Samba 3.x years ago) also fail on 
>>> putting the driver remote for download.
>>>
>>> I'm trying this from a W8.1 WS
>>>
>>> Thanks!
>>> Franz
>>>
>>>
>>>>>> L.P.H. van Belle <belle at bazuin.nl> 04.06.2017 00:38 >>>
>>>
>>>> Op 1 jun. 2017 om 15:20 heeft Franz Gansberger via samba 
>>>> <samba at lists.samba.org> het volgende geschreven:
>>>>
>>>> Hi all,
>>>>
>>>> according to this thread, I ran into the same situation:
>>>>
>>>> [2017/06/01 10:35:46.909754,  0] 
>>>> ../source3/rpc_server/spoolss/srv_spoolss_nt.c:8476(_spoolss_AddPrinterDriverEx)
>>>>   _spoolss_AddPrinterDriverEx: level 8 not yet implemented
>>>> [2017/06/01 10:35:46.925055,  0] 
>>>> ../source3/printing/nt_printing.c:1097(move_driver_file_to_download_area)
>>>>   move_driver_file_to_download_area: Unable to rename 
>>>> [x64/kmfc5150_xps] to [x64/3/KMFC5150_XPS]: 
>>>> NT_STATUS_OBJECT_NAME_NOT_FOUND
>>>>
>>>>
>>>> [print$]
>>>>	    path = /data/data/printerdrivers/
>>>>	    read only = no
>>>>	   acl_xattr:ignore system acl = yes
>>>>	   browseable = yes
>>>>	   guest ok = no
>>>>	   write list = root, administrator, @"Domain Admins", @lpadmin, 
>>>> @"Print Operators"
>>>>
>>>>
>>>> Samba version 4.5.8-Debian
>>>>
>>>> I followed all the hints from Rowland, but...
>>>>
>>>> Has there been any solution so far?
>>>> Appreciate any thoughts..
>>>> :-)
>>>>
>>>> Franz
>>>> -- 
>>>> To unsubscribe from this list go to the following URL and read the
>>>> instructions:  https://lists.samba.org/mailman/options/samba

>>> if it a kyocera driver, you need to cleanup all 32bit parts from the 
>>> inf.
>>>
>>> and you can try
>>> ln -s x64 X64 in the driver folder
>>>
>>> last xps driver? cant test this atm but try the pcl or ps version.
>>>
>>> there is a post of me which tells verything you need to know for a 
>>> printer (cups) set on debian. (google for it, use l.p.h in your search)
>>>
>>> last, you only need the first three line if you use acl_xattr:ignore 
>>> system acl = yes
>>> and configure the share from a windows client.
>>>
>>> dont mix posix acl settings and acl_xattr:ignore system acl = yes
>>>
>>> still no go after above, i can test next wednesday and give better 
>>> help.
>>>
>>> ps? that driver is it a 'level 3 Windows driver' since level 4 and 
>>> up are not supported yet.   ( the error msg shows level 8, but that 
>>> not the windows level)
>>>
>>> greetz
>>>
>>> Louis
>>>
>>>
>>
>>
>
>