[Samba] samba4 + cups - it is working for someone?

[steve]

On Mon, 2013-06-10 at 12:40 -0400, Gerry Reno wrote:
> On 06/10/2013 12:16 PM, steve wrote:
> > On Mon, 2013-06-10 at 09:54 -0400, Gerry Reno wrote:
> >> On 06/10/2013 03:47 AM, steve wrote:
> >>> On 09/06/13 20:16, Gerry Reno wrote:
> >>>> On 06/09/2013 06:45 AM, steve wrote:
> >>>>> On 09/06/13 11:00, Adam Sienkiewicz wrote:
> >>>>>> Hi Steve
> >>>>>>
> >>>>>> I procceeded regarding this howtu. All seems to be fine except
> >>>>>> connection samba-cups. From windows I can add printer, print test page
> >>>>>> but all print jobs from samba are lost between samba and cups I think.
> >>>>>> There is no entries in cups logs only issue in samba logs
> >>>>> Hi
> >>>>> I just found my eror. i hope it's the same for you:
> >>>>>
> >>>>> Here is my smb.conf:
> >>>>>
> >>>>> [printers]
> >>>>>       path = /var/spool/samba
> >>>>>       printable = yes
> >>>>>       printing = CUPS
> >>>>>
> >>>>> [print$]
> >>>>>       path = /srv/samba/Printer_drivers
> >>>>>       comment = Printer Drivers
> >>>>>       writeable = yes
> >>>>>
> >>>>> [hpdeskjetf2200series]
> >>>>>       path = /var/spool/samba/
> >>>>>       browseable = yes
> >>>>>       printable = yes
> >>>>>       printer name = hpdeskjetf2200series
> >>>>> #printer name = "HP Deskjet F2200 series"
> >>>>>
> >>>>> Note the printer name lines. I had the windows name "HP Deskjet F2200 series"
> >>>>>
> >>>>> The clue was in the logs:
> >>>>> /usr/local/samba/sbin/smbd: Unable to get jobs for ipp://localhost/printers/HP Deskjet F2200 series -
> >>>>> client-error-not-found
> >>>>>
> >>>>> I changed to the Linux/cups printer name and print jobs got sent without error.
> >>>>> HTH
> >>>>> Steve
> >>>>>
> >>>>>
> >>>> Steve, still not working for me.
> >>>>
> >>>> What is the output of  lpinfo -v  on your system?
> >>>>
> >>>> Gerry
> >>>>
> >>>>
> >>>>
> >>>>
> >>> Hi Gerry
> >>> lpinfo -v
> >>> network http
> >>> network ipp
> >>> network ipps
> >>> network https
> >>> direct usb://HP/Deskjet%20F2200%20series?serial=CN8BO1S0S605CC
> >>> network socket
> >>> network lpd
> >>> direct hp:/usb/Deskjet_F2200_series?serial=CN8BO1S0S605CC
> >>> network smb
> >>> direct parallel:/dev/lp0
> >>> network beh
> >>> direct hpfax
> >>>
> >>> I wonder if you have the cups dev libraries and headers installed before you compile. I didn't so that was another
> >>> problem I had. On openSUSE it's cups-devel. Just to make sure, I built with ./configure --enable-cups
> >>>
> >>> Suerte,
> >>> Steve
> >>>
> >>
> >> Ok, here's lpinfo -v on my test system:
> >> # lpinfo -v
> >> network ipp
> >> network lpd
> >> file cups-pdf:/
> >> network socket
> >> direct scsi
> >> network https
> >> network http
> >> network socket://192.168.2.180
> >>
> >> The last entry is a networked printer
> >>
> >> I notice that "network smb" is missing.  Going to CH10 in the Samba manual I see that it takes a symlink from smbspool. 
> >> Did you have to do that manually?  Or did it just get made during install?
> >>
> >> Gerry
> > Hi
> > No idea about the symlink until you mentioned it so it must have been
> > made during the install.
> >
> >
> 
> I don't understand then why my Samba git stable (4.0.6)  install doesn't have this symlink.
> $ find . -name config.h
> ./source4/heimdal_build/config.h
> ./bin/default/include/config.h
> 
> Is there some configure switch that causes this to be generated?
> 
> Gerry
> 
> 
> 
Hi
I couldn't get it to work with 4.0.6. We have: 
Version 4.1.0pre1-GIT-56055f7
It's the one you get from here:
git://git.samba.org/samba.git