[Samba] samba4 + cups - it is working for someone?

[Gerry Reno]

On 06/10/2013 12:16 PM, steve wrote:
> On Mon, 2013-06-10 at 09:54 -0400, Gerry Reno wrote:
>> On 06/10/2013 03:47 AM, steve wrote:
>>> On 09/06/13 20:16, Gerry Reno wrote:
>>>> On 06/09/2013 06:45 AM, steve wrote:
>>>>> On 09/06/13 11:00, Adam Sienkiewicz wrote:
>>>>>> Hi Steve
>>>>>>
>>>>>> I procceeded regarding this howtu. All seems to be fine except
>>>>>> connection samba-cups. From windows I can add printer, print test page
>>>>>> but all print jobs from samba are lost between samba and cups I think.
>>>>>> There is no entries in cups logs only issue in samba logs
>>>>> Hi
>>>>> I just found my eror. i hope it's the same for you:
>>>>>
>>>>> Here is my smb.conf:
>>>>>
>>>>> [printers]
>>>>>       path = /var/spool/samba
>>>>>       printable = yes
>>>>>       printing = CUPS
>>>>>
>>>>> [print$]
>>>>>       path = /srv/samba/Printer_drivers
>>>>>       comment = Printer Drivers
>>>>>       writeable = yes
>>>>>
>>>>> [hpdeskjetf2200series]
>>>>>       path = /var/spool/samba/
>>>>>       browseable = yes
>>>>>       printable = yes
>>>>>       printer name = hpdeskjetf2200series
>>>>> #printer name = "HP Deskjet F2200 series"
>>>>>
>>>>> Note the printer name lines. I had the windows name "HP Deskjet F2200 series"
>>>>>
>>>>> The clue was in the logs:
>>>>> /usr/local/samba/sbin/smbd: Unable to get jobs for ipp://localhost/printers/HP Deskjet F2200 series -
>>>>> client-error-not-found
>>>>>
>>>>> I changed to the Linux/cups printer name and print jobs got sent without error.
>>>>> HTH
>>>>> Steve
>>>>>
>>>>>
>>>> Steve, still not working for me.
>>>>
>>>> What is the output of  lpinfo -v  on your system?
>>>>
>>>> Gerry
>>>>
>>>>
>>>>
>>>>
>>> Hi Gerry
>>> lpinfo -v
>>> network http
>>> network ipp
>>> network ipps
>>> network https
>>> direct usb://HP/Deskjet%20F2200%20series?serial=CN8BO1S0S605CC
>>> network socket
>>> network lpd
>>> direct hp:/usb/Deskjet_F2200_series?serial=CN8BO1S0S605CC
>>> network smb
>>> direct parallel:/dev/lp0
>>> network beh
>>> direct hpfax
>>>
>>> I wonder if you have the cups dev libraries and headers installed before you compile. I didn't so that was another
>>> problem I had. On openSUSE it's cups-devel. Just to make sure, I built with ./configure --enable-cups
>>>
>>> Suerte,
>>> Steve
>>>
>>
>> Ok, here's lpinfo -v on my test system:
>> # lpinfo -v
>> network ipp
>> network lpd
>> file cups-pdf:/
>> network socket
>> direct scsi
>> network https
>> network http
>> network socket://192.168.2.180
>>
>> The last entry is a networked printer
>>
>> I notice that "network smb" is missing.  Going to CH10 in the Samba manual I see that it takes a symlink from smbspool. 
>> Did you have to do that manually?  Or did it just get made during install?
>>
>> Gerry
> Hi
> No idea about the symlink until you mentioned it so it must have been
> made during the install.
>
>

I don't understand then why my Samba git stable (4.0.6)  install doesn't have this symlink.
$ find . -name config.h
./source4/heimdal_build/config.h
./bin/default/include/config.h

Is there some configure switch that causes this to be generated?

Gerry