[Samba] samba4 + cups - it is working for someone?

[steve]

On Mon, 2013-06-10 at 09:54 -0400, Gerry Reno wrote:
> On 06/10/2013 03:47 AM, steve wrote:
> > On 09/06/13 20:16, Gerry Reno wrote:
> >> On 06/09/2013 06:45 AM, steve wrote:
> >>> On 09/06/13 11:00, Adam Sienkiewicz wrote:
> >>>> Hi Steve
> >>>>
> >>>> I procceeded regarding this howtu. All seems to be fine except
> >>>> connection samba-cups. From windows I can add printer, print test page
> >>>> but all print jobs from samba are lost between samba and cups I think.
> >>>> There is no entries in cups logs only issue in samba logs
> >>> Hi
> >>> I just found my eror. i hope it's the same for you:
> >>>
> >>> Here is my smb.conf:
> >>>
> >>> [printers]
> >>>       path = /var/spool/samba
> >>>       printable = yes
> >>>       printing = CUPS
> >>>
> >>> [print$]
> >>>       path = /srv/samba/Printer_drivers
> >>>       comment = Printer Drivers
> >>>       writeable = yes
> >>>
> >>> [hpdeskjetf2200series]
> >>>       path = /var/spool/samba/
> >>>       browseable = yes
> >>>       printable = yes
> >>>       printer name = hpdeskjetf2200series
> >>> #printer name = "HP Deskjet F2200 series"
> >>>
> >>> Note the printer name lines. I had the windows name "HP Deskjet F2200 series"
> >>>
> >>> The clue was in the logs:
> >>> /usr/local/samba/sbin/smbd: Unable to get jobs for ipp://localhost/printers/HP Deskjet F2200 series -
> >>> client-error-not-found
> >>>
> >>> I changed to the Linux/cups printer name and print jobs got sent without error.
> >>> HTH
> >>> Steve
> >>>
> >>>
> >> Steve, still not working for me.
> >>
> >> What is the output of  lpinfo -v  on your system?
> >>
> >> Gerry
> >>
> >>
> >>
> >>
> > Hi Gerry
> > lpinfo -v
> > network http
> > network ipp
> > network ipps
> > network https
> > direct usb://HP/Deskjet%20F2200%20series?serial=CN8BO1S0S605CC
> > network socket
> > network lpd
> > direct hp:/usb/Deskjet_F2200_series?serial=CN8BO1S0S605CC
> > network smb
> > direct parallel:/dev/lp0
> > network beh
> > direct hpfax
> >
> > I wonder if you have the cups dev libraries and headers installed before you compile. I didn't so that was another
> > problem I had. On openSUSE it's cups-devel. Just to make sure, I built with ./configure --enable-cups
> >
> > Suerte,
> > Steve
> >
> 
> 
> Ok, here's lpinfo -v on my test system:
> # lpinfo -v
> network ipp
> network lpd
> file cups-pdf:/
> network socket
> direct scsi
> network https
> network http
> network socket://192.168.2.180
> 
> The last entry is a networked printer
> 
> I notice that "network smb" is missing.  Going to CH10 in the Samba manual I see that it takes a symlink from smbspool. 
> Did you have to do that manually?  Or did it just get made during install?
> 
> Gerry
Hi
No idea about the symlink until you mentioned it so it must have been
made during the install.