[Samba] Problem with trust relationship

[Leonardo Carneiro]

On Mon, Feb 21, 2011 at 6:34 PM, Leonardo Carneiro
<chesterman86 at gmail.com>wrote:

> On Sat, Feb 19, 2011 at 11:56 AM, Leonardo Carneiro <
> chesterman86 at gmail.com> wrote:
>
>> On Sat, Feb 19, 2011 at 11:15 AM, Leonardo Carneiro <
>> chesterman86 at gmail.com> wrote:
>>
>>> On Sat, Feb 12, 2011 at 12:51 PM, Leonardo Carneiro <
>>> chesterman86 at gmail.com> wrote:
>>>
>>>> >
>>>> > Do you have the log level set at at least 3?
>>>> >
>>>> > John
>>>> >
>>>>
>>>> It was set to 2 (3 for winbind), but i setted for 3 and did some
>>>> testes. again, nothing interesting. setted to 5 and at least something
>>>> related to the machine name showed up on nmbd.log:
>>>>
>>>>
>>>> [2011/02/12 12:43:48.071897,  4]
>>>> nmbd/nmbd_workgroupdb.c:281(dump_workgroups)
>>>>  dump_workgroups()
>>>>   dump workgroup on subnet     192.168.0.2: netmask=  255.255.254.0:
>>>>        DOMINIO(1) current master browser = DOMAINSERVER
>>>>                ... (some machines)
>>>>                VELTEC16 40011003 () (the machine that i'm testing)
>>>>                 ... (some others machines)
>>>> other than this... nothing.
>>>>
>>>
>>> Hi guys. I had to give a break to the samba debug cause my ldap base went
>>> crazy for a while after the upgrade, but it's ok now.
>>>
>>> Unfortunally, my samba PDC still isn't going quite well =(
>>>
>>> There is any other ideas that i could try? Before all this, eventually
>>> one or two machines had trust relationship issues, but all i need to do was
>>> re-adding them to the domain. Now i can't even do this, since when i try to
>>> add a machine is the domain, the Workstation service just crashes. =S
>>>
>>
>> One thing i notice is that i cannot see my domain box when i navigate
>> through the network, but if i go direct to the IP of the server i can see
>> the shares and stuff.
>>
>
> In addition to not see my domain box when i navigate through the network, i
> saw another strange thing. i got a fresh install and tried to add to domain.
> Instead of the usual crash that happens in all other machines, it just says
> that there is no domain or the domain cannot be reached. I thing there is
> something that is making my domain to not be seeing by the whole network.
> not something like firewall, cause when i enter the ip, i can navigate
> through the shares, but something that is making my domain to now announce
> itself.
>
> since this is a fresh install, i doubt that this is a malware issue.
>

Hey, it finally worked. There was a ubuntu server machine with the defaults
configuration that comes with ubuntu and it was trying to become the domain
master and logon master. i changed the configuration and it's ok now.