[Samba] Directly replace smb. [Scanned]
yyq at eisoo.com
yyq at eisoo.com
Mon Aug 15 21:54:32 MDT 2011
Hi, the problem seems to be solved by creating /usr/var and /var/samba,
that need more tests.
Thanks for replying guys.
于 2011-8-16 11:12, yyq at eisoo.com 写道:
> Actually, the target machine run on a DOM(Disk On Module), and its
> capacity is limited, so unnecessary module are all stripped, so I
> can't use the yum and rpm and etc.
>
>
> 于 2011-8-16 10:41, Christopher M. Bailey 写道:
>> ----- Original Message -----
>> From: yyq at eisoo.com
>> Sent: Tue, 8/16/2011 12:06pm
>> To: samba at lists.samba.org
>> Subject: [Samba] Directly replace smb. [Scanned]
>>
>> Hi,all,
>> I have a redhat Linux of 2.6.24 kernel(x86_64), which smb is
>> 3.0, I
>> want to upgrade it, but the system doesn't have gcc development and no
>> rpm, that means I can't upgrade the smb on this machine.So I compile the
>> new samba on other machine and copy necessary files and replace them on
>> my target machine and checked:
>>
>> smbd -V
>> nmbd -V
>> winbind -V
>>
>> are all the right version, but I can't start the service: service smb
>> start and etc. are all failed. what's wrong with my method?
>>
>> My smb configure as below:
>>
>> SBINDIR: /usr/sbin
>> BINDIR: /usr/bin
>> SWATDIR: /etc/swat
>> CONFIGFILE: /etc/samba/smb.conf
>> LOGFILEBASE: /var/samba
>> LMHOSTSFILE: /etc/samba/lmhosts
>> LIBDIR: /usr/lib
>> MODULESDIR: /usr/lib
>> SHLIBEXT: so
>> LOCKDIR: /usr/var/locks
>> STATEDIR: /usr/var/locks
>> CACHEDIR: /usr/var/locks
>> PIDDIR: /usr/var/locks
>> SMB_PASSWD_FILE: /usr/private/smbpasswd
>> PRIVATE_DIR: /usr/private
>>
>>
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>>
>> What was wrong with using yum to install gcc and the other software
>> you require before compiling the tar ball directly on the system you
>> want to install on?
>>
>> Cheers,
>> Chris
>>
>
>
More information about the samba
mailing list