[Samba] Directly replace smb. [Scanned]

[yyq at eisoo.com]

Actually, the target machine run on a DOM(Disk On Module), and its 
capacity is limited, so unnecessary module are all stripped, so I can't 
use the yum and rpm and etc.


于 2011-8-16 10:41, Christopher M. Bailey 写道:
> ----- Original Message -----
> From: yyq at eisoo.com
> Sent: Tue, 8/16/2011 12:06pm
> To: samba at lists.samba.org
> Subject: [Samba] Directly replace smb. [Scanned]
>
> Hi,all,
>       I have a redhat Linux of 2.6.24 kernel(x86_64), which smb is 3.0, I
> want to upgrade it, but the system doesn't have gcc development and no
> rpm, that means I can't upgrade the smb on this machine.So I compile the
> new samba on other machine and copy necessary files and replace them on
> my target machine and checked:
>
> smbd -V
> nmbd -V
> winbind -V
>
> are all the right version, but I can't start the service: service smb
> start and etc. are all failed. what's wrong with my method?
>
> My smb configure as below:
>
>      SBINDIR: /usr/sbin
>      BINDIR: /usr/bin
>      SWATDIR: /etc/swat
>      CONFIGFILE: /etc/samba/smb.conf
>      LOGFILEBASE: /var/samba
>      LMHOSTSFILE: /etc/samba/lmhosts
>      LIBDIR: /usr/lib
>      MODULESDIR: /usr/lib
>      SHLIBEXT: so
>      LOCKDIR: /usr/var/locks
>      STATEDIR: /usr/var/locks
>      CACHEDIR: /usr/var/locks
>      PIDDIR: /usr/var/locks
>      SMB_PASSWD_FILE: /usr/private/smbpasswd
>      PRIVATE_DIR: /usr/private
>
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> What was wrong with using yum to install gcc and the other software you require before compiling the tar ball directly on the system you want to install on?
>
> Cheers,
> Chris
>