[Samba] Re: Samba + Vista Issue

[Adam Stirk]

Hi,

Name resolution is working correctly, this is something I checked very
early in my investigation.

If I use net use with the ip address the drive is mapped straight away.
If I use net use with the dns name I am prompted to enter my
credentials.

Regards

Adam

-----Original Message-----
From: samba-bounces+adam.stirk=brantano.co.uk at lists.samba.org
[mailto:samba-bounces+adam.stirk=brantano.co.uk at lists.samba.org] On
Behalf Of Peter Slickers
Sent: 18 November 2008 23:34
To: samba list
Subject: [Samba] Re: Samba + Vista Issue

Adam Stirk wrote:
>
> I'm experiencing a problem with samba v3.2.4 and windows vista. If I
> access my samba share via the ip address e.g. \\192.168.0.1\share
> <file:///\\192.168.0.1\share>  windows will authenticate against the
> samba server and bring the share up, but if I use the dns name e.g.
> \\server.domain.local\share <file:///\\server.domain.local\share>  i'm
> faced with the logon box.

I guess that name resolution is not working properly.

Please open the command line interface on your Vista box and
type the following commands:

   ping server.domain.local
   ping server

If that is successful, try the 'net use' command:
   net use server


Peter
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba