MS-Client

Stefaan De Roeck stefaan at ace.ulyssis.student.kuleuven.ac.be
Fri Aug 6 22:37:51 GMT 1999


Hi!

I use MS-Client for pre-Windows 95 computers to use shares on my Linux
boxes, but also to serve their disks to everyone else.
This used to work, but I gradually upgraded and problems arose.  
This afternoon, I wanted to use smbclient to access a share on the
Dos-computer, it gave listings of what was there, but I couldnt retrieve
any file.  Mounting didn't work either, because I still had the utilities
for 2.0-kernel installed, so I installed the new one (slackware package
for samba 2.0.3) and now smbclient doesnt even open the share on that dos
computer.  Is this a known problem?  (previous version 1.9.18p8 I think).
I've included "output", which is a dump of smbclient -D a, and "output2",
output of dmesg (first attempt to dos computer, then successfull attempt
to windows 95 computer, then dos computer again).
And err, I tried with samba 1.9.0, works perfectly.  This can't be right.

Thanks,

Stefaan

-------------- next part --------------
Added interface ip=10.0.0.1 bcast=10.0.0.255 nmask=255.255.255.0
Client started (version 2.0.3).
Connecting to 10.0.0.5 at port 139
write_socket(3,76)
write_socket(3,76) wrote 76
Sent session request
got smb length of 0
size=0
smb_com=0x0
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=0
smb_flg2=0
smb_tid=0
smb_pid=0
smb_uid=0
smb_mid=0
smt_wct=0
smb_bcc=0
 session request ok
write_socket(3,168)
write_socket(3,168) wrote 168
got smb length of 37
size=37
smb_com=0x72
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=0
smb_pid=21433
smb_uid=0
smb_mid=1
smt_wct=1
smb_vwv[0]=0 (0x0)
smb_bcc=0
size=37
smb_com=0x72
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=0
smb_pid=21433
smb_uid=0
smb_mid=1
smt_wct=1
smb_vwv[0]=0 (0x0)
smb_bcc=0

 session setup ok
write_socket(3,70)
write_socket(3,70) wrote 70
got smb length of 35
size=35
smb_com=0x75
smb_rcls=2
smb_reh=0
smb_err=1
smb_flg=128
smb_flg2=0
smb_tid=0
smb_pid=21433
smb_uid=0
smb_mid=1
smt_wct=0
smb_bcc=0
tree connect failed: ERRSRV - ERRerror (Non-specific error code.)
-------------- next part --------------
smb_newconn: fd=3, pid=20343
smb_newconn: protocol=1, max_xmit=1024, pid=20343 capabilities=0x0
smb_errno: errcls 1  code 2  from command 0x8
smb_errno: errcls 1  code 2  from command 0x8
smb_errno: errcls 1  code 2  from command 0x8
smb_errno: errcls 1  code 2  from command 0x8
smb_errno: errcls 1  code 2  from command 0x8
smb_errno: errcls 1  code 2  from command 0x8
smb_newconn: fd=3, pid=20380
smb_newconn: detected WIN95 server
smb_newconn: protocol=5, max_xmit=2920, pid=20380 capabilities=0x0
smb_proc_readdir_long: starting fpos=2, mask=\*
smb_proc_readdir_long: new mask, len=3 at 1003, mask=ARD
smb_proc_readdir_long: received 28 entries, eos=1, resume=0
smb_close_dentry: closed //ACCESRY, count=1
smb_close_dentry: closed //BATHROOM, count=1
smb_close_dentry: closed //BEDROOM, count=1
smb_close_dentry: closed //CATALOG, count=1
smb_close_dentry: closed //DEN, count=1
smb_close_dentry: closed //DINING, count=1
smb_close_dentry: closed //EXPERT.BMP, count=1
smb_close_dentry: closed //GARAGE, count=1
smb_close_dentry: closed //GIGDIR.TXT, count=1
smb_close_dentry: closed //HD3D40.HLP, count=1
smb_close_dentry: closed //HD3DCD.Z, count=1
smb_close_dentry: closed //HD3DCDIF, count=1
smb_close_dentry: closed //HLP256.DLL, count=1
smb_close_dentry: closed //HOME3D40.TXT, count=1
smb_close_dentry: closed //INS0762.LIB, count=1
smb_close_dentry: closed //KIDSROOM, count=1
smb_close_dentry: closed //KITCHEN, count=1
smb_close_dentry: closed //LIVING, count=1
smb_close_dentry: closed //MSVFW, count=1
smb_close_dentry: closed //OFFICE, count=1
smb_close_dentry: closed //SAMPLES, count=1
smb_close_dentry: closed //SETUP.EXE, count=1
smb_close_dentry: closed //SETUP.INS, count=1
smb_close_dentry: closed //SHOWCASE.INI, count=1
smb_close_dentry: closed //TMPCDROM, count=1
smb_close_dentry: closed //WALL.BMP, count=1
smb_close_dentry: closed //XHME3DCD.EXE, count=1
smb_close_dentry: closed //YARD, count=1
smb_newconn: fd=3, pid=20385
smb_newconn: protocol=1, max_xmit=1024, pid=20385 capabilities=0x0
smb_errno: errcls 1  code 2  from command 0x8
smb_errno: errcls 1  code 2  from command 0x8


More information about the samba mailing list