[clug] Canberra Linux user group- assistance needed
Neill Cox
neill at ace-hosting.com.au
Sat Apr 29 04:24:20 GMT 2006
Previous message would have been much more useful if I'd attached the file
properly.
Sorry.
-------------- next part --------------
root at ubuntu:~# pvscan
PV /dev/hda2 VG VolGroup00 lvm2 [74.41 GB / 32.00 MB free]
Total: 1 [74.41 GB] / in use: 1 [74.41 GB] / in no VG: 0 [0 ]
root at ubuntu:~# lvscan
ACTIVE '/dev/VolGroup00/LogVol00' [72.44 GB] inherit
ACTIVE '/dev/VolGroup00/LogVol01' [1.94 GB] inherit
root at ubuntu:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/casper-snapshot
2062739 1271474 686459 65% /
tmpfs 518324 4 518320 1% /dev/shm
tmpfs 518324 12588 505736 3% /lib/modules/2.6.12-9-386/volatile
tmpfs 518324 12 518312 1% /tmp
tmpfs 10240 2928 7312 29% /dev
root at ubuntu:~# mkdir /mnt/data
root at ubuntu:~# mount /dev/VolGroup00/LogVol00 /mnt/data
mount: wrong fs type, bad option, bad superblock on /dev/VolGroup00/LogVol00,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
root at ubuntu:~# od -Ax -t x1 /dev/VolGroup00/LogVol00 | head -n 40
000000 00 80 00 80 00 80 00 80 00 80 00 80 00 80 00 80
*
000400 00 80 22 81 00 c0 21 81 cc fc 0e 80 7a 86 ba 80
000410 a4 97 1b 81 00 80 00 80 02 80 00 80 02 80 00 80
000420 00 80 00 80 00 80 00 80 00 80 00 80 31 d5 4b c4
000430 31 d5 4b c4 f1 82 ff ff 53 ef 03 80 01 80 00 80
000440 38 83 d7 c2 00 80 00 80 00 80 00 80 01 80 00 80
000450 00 80 00 80 0b 80 00 80 80 80 00 80 3c 80 00 80
000460 06 80 00 80 03 80 00 80 95 c7 6c bd 65 8d 4e de
000470 86 92 d9 97 62 c0 a3 89 00 80 00 80 00 80 00 80
000480 00 80 00 80 00 80 00 80 00 80 00 80 00 80 00 80
*
0004c0 00 80 00 80 00 80 00 80 00 80 00 80 00 80 00 84
0004d0 00 80 00 80 00 80 00 80 00 80 00 80 00 80 00 80
0004e0 08 80 00 80 00 80 00 80 00 80 00 80 e6 97 b5 9d
0004f0 1f b2 49 82 b6 e6 3a e7 fd da 71 99 02 81 00 80
000500 00 80 00 80 00 80 00 80 38 83 d7 c2 0e 88 00 80
000510 0f 88 00 80 10 88 00 80 11 88 00 80 12 88 00 80
000520 13 88 00 80 14 88 00 80 15 88 00 80 16 88 00 80
000530 17 88 00 80 18 88 00 80 19 88 00 80 1a 88 00 80
000540 1b 8c 00 80 00 80 00 80 00 80 00 80 00 80 00 82
000550 00 80 00 80 00 80 00 80 00 80 00 80 00 80 00 80
*
001000 06 04 00 00 07 04 00 00 08 04 00 00 e5 57 f3 7f
001010 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001020 06 84 00 00 07 84 00 00 08 84 00 00 f8 77 00 80
001030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001040 00 00 01 00 01 00 01 00 02 00 01 00 fe 7b 00 80
001050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001060 06 84 01 00 07 84 01 00 08 84 01 00 f8 77 00 80
001070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001080 00 00 02 00 01 00 02 00 02 00 02 00 fe 7b 00 80
001090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0010a0 06 84 02 00 07 84 02 00 08 84 02 00 cf 77 f9 7f
0010b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0010c0 00 00 03 00 01 00 03 00 02 00 03 00 e2 7b fb 7f
0010d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0010e0 06 84 03 00 07 84 03 00 08 84 03 00 ef 77 fc 7f
0010f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001100 00 00 04 00 01 00 04 00 02 00 04 00 fe 7b 00 80
root at ubuntu:~# fsck /dev/VolGroup00/LogVol00
fsck 1.38 (30-Jun-2005)
fsck 1.38 (30-Jun-2005)
root at ubuntu:~# e2fsck 1.38 (30-Jun-2005)
fsck.ext3: Filesystem revision too high while trying to open /dev/VolGroup00/LogVol00
The filesystem revision is apparently too high for this version of e2fsck.
(Or the filesystem superblock is corrupt)
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
root at ubuntu:~# fsck -b 8193 /dev/VolGroup00/LogVol00
fsck 1.38 (30-Jun-2005)
e2fsck 1.38 (30-Jun-2005)
fsck.ext3: Bad magic number in super-block while trying to open /dev/VolGroup00/LogVol00
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
root at ubuntu:~# dmesg
[4294670.576000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294670.576000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.578000] Uncovering SIS963 that hid as a SIS503 (compatible=1)
[4294670.578000] Enabling SiS 96x SMBus.
[4294670.579000] Boot video device is 0000:01:00.0
[4294670.606000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.608000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[4294670.608000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[4294670.608000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[4294670.609000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294670.609000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[4294670.609000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[4294670.610000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[4294670.610000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294670.613000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.613000] pnp: PnP ACPI init
[4294670.616000] pnp: PnP ACPI: found 13 devices
[4294670.617000] PnPBIOS: Disabled by ACPI PNP
[4294670.617000] PCI: Using ACPI for IRQ routing
[4294670.617000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.627000] audit: initializing netlink socket (disabled)
[4294670.627000] audit: initialized
[4294670.627000] highmem bounce pool size: 64 pages
[4294670.627000] VFS: Disk quotas dquot_6.5.1
[4294670.627000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.628000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
[4294670.628000] devfs: boot_options: 0x0
[4294670.628000] Initializing Cryptographic API
[4294670.628000] isapnp: Scanning for PnP cards...
[4294670.982000] isapnp: No Plug & Play device found
[4294670.996000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294670.996000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294670.999000] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[4294670.999000] If AUX port is really absent please use the 'i8042.noaux' option.
[4294671.002000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.002000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.002000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294671.002000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.002000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.004000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.004000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.004000] io scheduler noop registered
[4294671.004000] io scheduler anticipatory registered
[4294671.005000] io scheduler deadline registered
[4294671.005000] io scheduler cfq registered
[4294671.005000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294671.005000] EISA: Probing bus 0 at eisa.0
[4294671.005000] Cannot allocate resource for EISA slot 1
[4294671.005000] EISA: Detected 0 cards.
[4294671.005000] NET: Registered protocol family 2
[4294671.014000] IP: routing cache hash table of 8192 buckets, 64Kbytes
[4294671.014000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[4294671.016000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294671.016000] TCP: Hash tables configured (established 262144 bind 65536)
[4294671.017000] NET: Registered protocol family 8
[4294671.017000] NET: Registered protocol family 20
[4294671.017000] ACPI wakeup devices:
[4294671.017000] PCI0 USB0 USB1 USB2 AMR0 UAR1 UAR2
[4294671.017000] ACPI: (supports S0 S1 S4 S5)
[4294671.018000] RAMDISK: Compressed image found at block 0
[4294671.210000] VFS: Mounted root (ext2 filesystem).
[4294671.210000] VFS: Mounted root (ext2 filesystem).
[4294671.210000] Trying to move old root to /initrd ... okay
[4294671.210000] Freeing unused kernel memory: 224k freed
[4294671.306000] NET: Registered protocol family 1
[4294671.424000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294671.446000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294672.212000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.212000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.212000] ACPI: bus type ide registered
[4294672.282000] usbcore: registered new driver usbfs
[4294672.283000] usbcore: registered new driver hub
[4294672.284000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294672.285000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294672.285000] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
[4294672.286000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[4294672.286000] ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb010000
[4294672.340000] hub 1-0:1.0: USB hub found
[4294672.340000] hub 1-0:1.0: 2 ports detected
[4294672.343000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[4294672.343000] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
[4294672.343000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[4294672.343000] ohci_hcd 0000:00:03.1: irq 21, io mem 0xeb011000
[4294672.396000] hub 2-0:1.0: USB hub found
[4294672.397000] hub 2-0:1.0: 2 ports detected
[4294672.400000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[4294672.400000] ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
[4294672.400000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[4294672.400000] ohci_hcd 0000:00:03.2: irq 22, io mem 0xeb012000
[4294672.453000] hub 3-0:1.0: USB hub found
[4294672.453000] hub 3-0:1.0: 2 ports detected
[4294672.550000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[4294672.567000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[4294672.567000] ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
[4294672.568000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[4294672.568000] ehci_hcd 0000:00:03.3: irq 23, io mem 0xeb013000
[4294672.568000] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[4294672.568000] ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294672.569000] hub 4-0:1.0: USB hub found
[4294672.569000] hub 4-0:1.0: 6 ports detected
[4294672.590000] ACPI: PCI Interrupt 0000:00:0d.2[C] -> GSI 19 (level, low) -> IRQ 19
[4294672.590000] PCI: Via IRQ fixup for 0000:00:0d.2, from 11 to 3
[4294672.590000] ehci_hcd 0000:00:0d.2: VIA Technologies, Inc. USB 2.0
[4294672.590000] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 5
[4294672.590000] ehci_hcd 0000:00:0d.2: irq 19, io mem 0xeb016000
[4294672.590000] ehci_hcd 0000:00:0d.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294672.591000] hub 5-0:1.0: USB hub found
[4294672.591000] hub 5-0:1.0: 4 ports detected
[4294672.702000] USB Universal Host Controller Interface driver v2.2
[4294672.703000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294672.703000] PCI: Via IRQ fixup for 0000:00:0d.0, from 9 to 1
[4294672.703000] uhci_hcd 0000:00:0d.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294672.765000] uhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 6
[4294672.765000] uhci_hcd 0000:00:0d.0: irq 17, io base 0x0000e800
[4294672.766000] hub 6-0:1.0: USB hub found
[4294672.766000] hub 6-0:1.0: 2 ports detected
[4294672.769000] ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 18 (level, low) -> IRQ 18
[4294672.769000] PCI: Via IRQ fixup for 0000:00:0d.1, from 5 to 2
[4294672.769000] uhci_hcd 0000:00:0d.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294672.831000] uhci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 7
[4294672.831000] uhci_hcd 0000:00:0d.1: irq 18, io base 0x0000ec00
[4294672.832000] hub 7-0:1.0: USB hub found
[4294672.832000] hub 7-0:1.0: 2 ports detected
[4294673.039000] usb 4-4: new high speed USB device using ehci_hcd and address 3
[4294673.293000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[4294674.303000] usbcore: registered new driver hiddev
[4294674.320000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.0-1
[4294674.320000] usbcore: registered new driver usbhid
[4294674.320000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294674.455000] mice: PS/2 mouse device common for all mice
[4294674.964000] ACPI: CPU0 (power states: C1[C1])
[4294675.389000] usbcore: registered new driver usbkbd
[4294675.389000] drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
[4294675.402000] usbcore: registered new driver usbserial
[4294675.406000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
[4294675.410000] usbcore: registered new driver usbserial_generic
[4294675.410000] drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
[4294675.639000] vga16fb: initializing
[4294675.639000] vga16fb: mapped to 0xc00a0000
[4294675.655000] fb0: VGA16 VGA frame buffer device
[4294675.814000] Console: switching to colour frame buffer device 80x30
[4294682.578000] parport: PnPBIOS parport detected.
[4294682.578000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294685.143000] SCSI subsystem initialized
[4294685.149000] Initializing USB Mass Storage driver...
[4294685.153000] usbcore: registered new driver usb-storage
[4294685.153000] USB Mass Storage support registered.
[4294685.190000] Floppy drive(s): fd0 is 1.44M
[4294685.205000] FDC 0 is a post-1991 82077
[4294686.117000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[4294686.117000] SIS5513: chipset revision 0
[4294686.117000] SIS5513: not 100% native mode: will probe irqs later
[4294686.117000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[4294686.117000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[4294686.117000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[4294686.117000] Probing IDE interface ide0...
[4294686.381000] hda: ST380011A, ATA DISK drive
[4294687.095000] hdb: SONY DVD RW DRU-510A, ATAPI CD/DVD-ROM drive
[4294687.146000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294687.163000] Probing IDE interface ide1...
[4294687.427000] hdc: ST3120022A, ATA DISK drive
[4294688.141000] hdd: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
[4294688.192000] ide1 at 0x170-0x177,0x376 on irq 15
[4294688.281000] Probing IDE interface ide2...
[4294688.794000] Probing IDE interface ide3...
[4294689.306000] Probing IDE interface ide4...
[4294689.818000] Probing IDE interface ide5...
[4294690.367000] ide-floppy driver 0.99.newide
[4294690.413000] hda: max request size: 1024KiB
[4294690.413000] hda: Host Protected Area detected.
[4294690.413000] current capacity is 156299375 sectors (80025 MB)
[4294690.413000] native capacity is 156301488 sectors (80026 MB)
[4294690.414000] hda: Host Protected Area disabled.
[4294690.414000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[4294690.414000] hda: cache flushes supported
[4294690.424000] /dev/ide/host0/bus0/target0/lun0: p1 p2
[4294690.455000] hdc: max request size: 1024KiB
[4294690.461000] hdc: Host Protected Area detected.
[4294690.461000] current capacity is 234439535 sectors (120033 MB)
[4294690.461000] native capacity is 234441648 sectors (120034 MB)
[4294690.463000] hdc: Host Protected Area disabled.
[4294690.463000] hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[4294690.464000] hdc: cache flushes supported
[4294690.468000] /dev/ide/host0/bus1/target0/lun0: p1 p2 < p5 p6 p7 >
[4294690.755000] hdb: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache
[4294690.755000] Uniform CD-ROM driver Revision: 3.20
[4294690.790000] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
[4294691.846000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294692.094000] ISO 9660 Extensions: RRIP_1991A
[4294710.679000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294710.683000] 8139cp: pci dev 0000:00:0b.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294710.683000] 8139cp: Try the "8139too" driver instead.
[4294710.709000] 8139too Fast Ethernet driver 0.9.27
[4294710.713000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[4294710.717000] eth0: RealTek RTL8139 at 0xe400, 00:40:f4:89:29:e2, IRQ 19
[4294710.717000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294713.559000] NET: Registered protocol family 17
[4294713.571000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294723.456000] cloop: Initializing cloop v2.01
[4294723.597000] cloop: loaded (max 8 devices)
[4294723.649000] loop: loaded (max 8 devices)
[4294723.661000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294727.525000] cloop: losetup_file: 32753 blocks, 65536 bytes/block, largest block is 65562 bytes.
[4294727.577000] EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
[4294808.847000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294815.018000] Adding 1124508k swap on /dev/hdc5. Priority:-1 extents:1
[4294840.619000] lp0: using parport0 (interrupt-driven).
[4294840.645000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
[4294848.305000] cdrom: open failed.
[4294854.452000] Linux agpgart interface v0.101 (c) Dave Jones
[4294854.460000] agpgart: Detected SiS 648 chipset
[4294854.478000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294854.913000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294854.918000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294854.918000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294855.054000] i2c-sis96x version 1.0.0
[4294855.057000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
[4294855.274000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[4294855.583000] intel8x0_measure_ac97_clock: measured 49709 usecs
[4294855.583000] intel8x0: clocking to 48000
[4294861.820000] Real Time Clock Driver v1.12
[4294861.858000] input: PC Speaker
[4294863.950000] ts: Compaq touchscreen protocol output
[4294874.569000] NET: Registered protocol family 10
[4294874.569000] Disabled Privacy Extensions on device c02eb280(lo)
[4294874.570000] IPv6 over IPv4 tunneling driver
[4294882.057000] ACPI: Power Button (FF) [PWRF]
[4294882.057000] ACPI: Power Button (CM) [PWRB]
[4294882.057000] ACPI: Sleep Button (CM) [FUTS]
[4294882.164000] ibm_acpi: ec object not found
[4294885.142000] eth0: no IPv6 routers present
[4294945.140000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294945.140000] apm: overridden by ACPI.
[4294969.765000] Bluetooth: Core ver 2.7
[4294969.765000] NET: Registered protocol family 31
[4294969.765000] Bluetooth: HCI device and connection manager initialized
[4294969.765000] Bluetooth: HCI socket layer initialized
[4294969.775000] Bluetooth: L2CAP ver 2.7
[4294969.775000] Bluetooth: L2CAP socket layer initialized
[4294970.014000] Bluetooth: RFCOMM ver 1.5
[4294970.014000] Bluetooth: RFCOMM socket layer initialized
[4294970.014000] Bluetooth: RFCOMM TTY layer initialized
[4295491.341000] EXT3-fs: dm-2: couldn't mount because of unsupported optional features (80008000).
[4295831.460000] EXT3-fs: dm-2: couldn't mount because of unsupported optional features (80008000).
More information about the linux
mailing list