Error in using GDB
Vineesh U S
Vineesh.US at MobiApps.com
Sun Sep 2 21:29:32 EST 2001
Hi All,
I have installed Insight 5.0 on my RH7.0 PC. The configuration was as follows
**********************************************
host=i686-pc-linux
target=arm-linux (? Am I correct with this option)
**********************************************
My target is running on StrongARM (SA-1110)
And I'm able to load Insight on my PC. But when I try to connect to my target using TCP/IP Configuration :
**********************************************
Target: Remote/TCP
Hostname : 192.168.1.154
Port : 1058
**********************************************
It tells "Trying to communicate with target..... " and then the error
**********************************************
"192.168.1.154:1058: Bad file descriptor"
GDB cannot connect to the target board using 192.168.1.154:1058.
Verify that the board is securely connected and if necessary modify the port setting with the debugge prefernces
**********************************************
What could be wrong? Hve I missed something
Any help on this appreciated
Thanks in advance
Vineesh
PS: I have tested my targets TCP/IP connection and itz working fine. I'm able to ping, FTP, and telnet.
Vineesh U.S
12°46'14'' 77°30'02''
Tel:+91-80-552 7411/511 - 124(extn)
Fax:+91-80-552 7404
Programmer by Chance, Linuxer by Choice
-------------- next part --------------
HTML attachment scrubbed and removed
More information about the linux
mailing list