Win XP Home and Linux (Mdk and Knoppix)

[Tomasz Ciolek]

On Mon, Oct 20, 2003 at 01:35:24PM +0930, Galdes, Andrew (ERHS) wrote:
> 
> 1. The skynet card doesn't actually say its 802.11b compatible (I believe
> its 802.11-dc or something like that). When I plug the card into the Linux
> system and type in "iwconfig" the card displays as running at 11MB/s which

did you use the iwconfig to set the ad-hoc mode explicitly?

> is good. However, when I change the ip address of that card like this
> "ifconfig eth1 192.168.1.2 up" it changes to 2MB/s. 
 That happens sometimes. use iwconfig to re-set the rate... 

Regards
Tomasz Ciolek

-- 
Tomasz M. Ciolek	
*******************************************************************************
  email:  tmc at dreamcraft dot com dot au 
*******************************************************************************
	GPG Key ID: 0x41C4C2F0  Key available on www.pgp.net	
*******************************************************************************
  Everything falls under the law of change;	
  Like a dream, a phantom, a bubble, a shadow,
  like dew of flash of lightning.
  You should contemplate like this.