Error -110 problems

[David Gibson]

On Sun, Nov 03, 2002 at 01:06:11PM +0100, Jan Rychter wrote:
> Hi,
> 
> Are there plans to fix this problem:

Sure.  Just as soon as I figure out what's causing it :-(

> eth0: Error -110 writing Tx descriptor to BAP
> eth0: Error -110 writing Tx descriptor to BAP
> eth0: Error -110 writing Tx descriptor to BAP
> eth0: Error -110 writing Tx descriptor to BAP
> eth0: Error -110 writing Tx descriptor to BAP
> eth0: Error -110 writing Tx descriptor to BAP
> [...endless messages cut out...]
> 
> (occurs sporadically, after some use, "ifconfig eth0; cardctl eject;
> cardctl insert" fixes it)
> 
> I'm using:
> 
>   hermes.c: 5 Apr 2002 David Gibson <hermes at gibson.dropbear.id.au>
>   orinoco.c 0.11b (David Gibson <hermes at gibson.dropbear.id.au> and others)
>   orinoco_cs.c 0.11b (David Gibson <hermes at gibson.dropbear.id.au> and others)
>   eth0: Station identity 001f:0002:0002:0001
>   eth0: Looks like a Symbol firmware version [V2.51-01] (parsing to 25101)
>   eth0: Ad-hoc demo mode supported
>   eth0: IEEE standard IBSS ad-hoc mode supported
>   eth0: WEP supported, 104-bit key
>   eth0: MAC address 00:05:5D:D7:3D:BF
>   eth0: Station name "Prism  I"
>   eth0: ready
>   eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x0147
> 
> That's a D-Link DWL-650H and I'm also using the double-reset patch.
> 
> Just wondering -- a while ago 0.12 was produced, but it works even
> worse, so I was hoping for another release...

0.13a was release a while ago, although I haven't pushed it to
Marcelo.  It shoud help for Symbol firmware.

-- 
David Gibson			| For every complex problem there is a
david at gibson.dropbear.id.au	| solution which is simple, neat and
				| wrong.
http://www.ozlabs.org/people/dgibson