Orinoco card works, SMC 2632W doesn't

[Rakesh Arora]

Thanks for the suggestion Bin. But that is not the
problem since the SMC options (two of them) appear
under Ethernet cards in .config. 

I have CONFIG_HERMES=m, CONFIG_PCMCIA_HERMES=m,
CONFIG_NET_RADIO=y, CONFIG_NET_WIRELESS=y set in my
config file, which I think should take care of my
SMC2632W card. Can someone correct me if I am missing
something in my .config? Also does anyone have any
other suggestions. If someone could mail me their
working .config file, then it would be great (email:
rake_arora AT yahoo dot com).

Thanks,
rakesh

--- Bin Zhou <binzhou at site.uottawa.ca> wrote:
> 
> Hi, Rakesh
> 
> Did you set smc2632w card in .config?
> I notice you set 3c590/900 card as y, smc card not
> set.
> And it should be set as y, not m.
> 
> Best regars,
> 
> Bin
> 
> On Mon, 7 Jan 2002, Rakesh Arora wrote:
> 
> > Hi,
> >        Recently I got an Orinoco Silver card
> working
> > on my desktop using an Orinoco PCI adapter. I am
> using
> > kernel 2.4.16 and pcmcia-cs-3.1.29. However, my
> > SMC2632W card doesn't work with the same
> > configuration. The only change I have made is to
> the
> > wireless.opts file. The network.opts file is set
> up
> > correctly as are config.opts, ifcfg-eth1 etc. The
> > output of ifconfig, iwconfig and lsmod are as
> follows:
> > 
> > [root at localhost sysconfig]# iwconfig eth1
> > eth1      IEEE 802.11-DS  ESSID:"1e8146"  
> > Nickname:"localhost.localdomain"         
> > Frequency:2.412GHz  Sensitivity:1/3  Mode:Managed 
> 
> > Access Point: 00:02:2D:1E:81:46
> > Bit Rate:11Mb/s   RTS thr:off   Fragment thr:off  
> 
> > Power Management:off
> > Link quality:92/92  Signal level:2/153  Noise
> > level:108/153
> > Rx invalid nwid:0  invalid crypt:0  invalid misc:0
> > Segmentation fault (core dumped)
> > 
> > 
> > [root at localhost sysconfig]# ifconfig eth1
> > eth1      Link encap:Ethernet  HWaddr
> > 00:04:E2:1E:05:57  
> > UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:3 errors:0 dropped:0 overruns:0
> carrier:0
> > collisions:0 txqueuelen:100 
> > Interrupt:9 Base address:0x100 
> > 
> > 
> > [root at localhost /root]# lsmod
> > Module                  Size  Used by
> > orinoco_cs              4416   0 
> > orinoco                30160   0  [orinoco_cs]
> > hermes                  3328   0  [orinoco_cs
> orinoco]
> > ds                      6736   1  [orinoco_cs]
> > yenta_socket            8816   1 
> > pcmcia_core            39040   0  [orinoco_cs ds
> > yenta_socket]
> > 3c59x                  25920   1  (autoclean)
> > 
> > I hope that someone in the list can tell me what I
> am
> > doing wrong and guide me in the right direction. 
> > 
> > Thanks a lot,
> > rakesh
> > 



__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/