Does Avaya silver work with orinoco_cs?

[Alex]

	Hello,

	I'm trying to make work an Avaya silver with a PCI adapter in linux, but
with no success up to date. I'm always getting the same error I copy at the
end of this mail. Did anybody make it work? Does anybody the meaning of the
error messages?. My setup is:
	Suse 7.3
	Kernel 2.1.10
	Pcmcia CS 3.1.34
	orinoco_cs 0.11b

Regards,
Alex

This is the output of /var/log/messages:

Aug 28 14:11:03 atila kernel: Linux PCMCIA Card Services 3.1.34
Aug 28 14:11:03 atila kernel:   kernel build: 2.4.10 #1 dom ago 25 22:31:56
CEST 2002
Aug 28 14:11:03 atila kernel:   options:  [pci] [cardbus] [apm]
Aug 28 14:11:03 atila kernel: Intel ISA/PCI/CardBus PCIC probe:
Aug 28 14:11:03 atila kernel: PCI: Found IRQ 11 for device 00:0d.0
Aug 28 14:11:03 atila kernel:   TI 1410 rev 01 PCI-to-CardBus at slot 00:0d,
mem 0x10000000
Aug 28 14:11:03 atila kernel:     host opts [0]: [isa irq] [pci irq 11] [lat
168/176] [bus 2/5]
Aug 28 14:11:03 atila kernel:     ISA irqs (scanned) = none!<6>    PCI card
interrupts, PCI status changes
Aug 28 14:11:03 atila cardmgr[1730]: watching 1 sockets
Aug 28 14:11:03 atila cardmgr[1731]: starting, version is 3.1.34
Aug 28 14:11:03 atila cardmgr[1731]: initializing socket 0
Aug 28 14:11:03 atila kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Aug 28 14:11:03 atila cardmgr[1731]: socket 0: Intersil PRISM2 11 Mbps
Wireless Adapter
Aug 28 14:11:04 atila cardmgr[1731]:   product info: "Avaya Communication",
"Avaya Wireless PC Card", "Version 01.01", ""
Aug 28 14:11:04 atila cardmgr[1731]:   manfid: 0x0156, 0x0002  function: 6
(network)
Aug 28 14:11:04 atila cardmgr[1731]: executing: 'modprobe hermes'
Aug 28 14:11:04 atila kernel: hermes.c: 5 Apr 2002 David Gibson
<hermes at gibson.dropbear.id.au>
Aug 28 14:11:04 atila cardmgr[1731]: executing: 'modprobe orinoco'
Aug 28 14:11:04 atila kernel: orinoco.c 0.11b (David Gibson
<hermes at gibson.dropbear.id.au> and others)
Aug 28 14:11:04 atila cardmgr[1731]: executing: 'modprobe orinoco_cs'
Aug 28 14:11:04 atila kernel: orinoco_cs.c 0.11b (David Gibson
<hermes at gibson.dropbear.id.au> and others)
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0100-0x04ff: excluding
0x200-0x207 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0208-0x021f: clean.
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0230-0x0377: clean.
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0380-0x0387: clean.
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0390-0x04cf: clean.
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x04d8-0x04ff: clean.
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0800-0x08ff: clean.
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Aug 28 14:11:04 atila kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Aug 28 14:11:04 atila kernel: hermes @ IO 0x100: Timeout waiting for card to
reset (reg=0x0000)!
Aug 28 14:11:04 atila kernel: eth1: failed to reset hardware (err = -110)
Aug 28 14:11:04 atila kernel: orinoco_cs: register_netdev() failed
Aug 28 14:11:04 atila cardmgr[1731]: get dev info on socket 0 failed: No
such device