3Com 3CRWE73796B

[David Gibson]

On Fri, Apr 05, 2002 at 12:41:18PM +0200, Alex wrote:
> On Fri, Apr 05, 2002 at 02:11:42PM +1000, David Gibson wrote:
> > 
> > Try version 0.11 of the driver, which I just released on my website.
> > You'll also need to give the option "reset_cor=1" to the orinoco_cs
> > module.
> 
> ok.
> It worked... the first time.
> then I removed the card and reinserted it and I was not able to have it run
> anymore....
> Now I get theese errors:
> kernel: hermes @ IO 0x100: Timeout waiting for card to reset (reg=0x0000)!
> kernel: hermes @ IO 0x100: Timeout waiting for card to reset (reg=0x0000)!
> kernel: eth1: Error -110 shutting down Hermes chipset
> 
> There's one strange thing:
> it seems that the nic works only if it had been off for some hours, if I use
> it and then I try to turn it off and on it sotps working...

Ok, try the "testing" version from
http://www.ozlabs.org/people/dgibson/dldwd/testing.  It has a fix from
Pavel Roskin which apparently helps with COR resets on Symbol cards.

-- 
David Gibson			| For every complex problem there is a
david at gibson.dropbear.id.au	| solution which is simple, neat and
				| wrong.  -- H.L. Mencken
http://www.ozlabs.org/people/dgibson