samba and win2k "The network path was not found"
kittiphanh khamla
ktpkhamla at yahoo.com
Fri Mar 21 05:09:01 GMT 2003
Dear samba orgnisation,
i have installed my samba in my linux server, in my
network there are 5 machines, 1 is linux and other are
win2k, i have configured the file /etc/samba/smb.conf,
i change workgroup and etc...
and i make a "testparm", it's all right, and i restart
my samba, it's right.
i can see my linux name from windows network but when
i click it the message "The network path was not
found", when i try to ping from win2k to linux, it
works, when i try "nmblookup WORKGROUP" from linux,
it's ok, i can ping from linux to windows and windows
to linux, but i can not ping buy name from windows to
linux.
here is my smb.conf:
# This is the main Samba configuration file. You
should read the
# smb.conf(5) manual page in order to understand the
options listed
# here. Samba has a huge number of configurable
options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a #
(hash)
# is a comment and is ignored. In this example we will
use a #
# for commentry and a ; for parts of the config file
that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run
the command "testparm"
# to check that you have not made any basic syntactic
errors.
#
#======================= Global Settings
=====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = BECS
netbios name = becslinux
# server string is the equivalent of the NT
Description field
server string = Samba Server
wins server = 192.168.6.1
# This option is important for security. It allows you
to restrict
# connections to machines which are on your local
network. The
# following example restricts access to two C class
networks and
# the "loopback" interface. For more examples of the
syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
hosts allow = 192.168.6.
# if you want to automatically load your printer list
rather
# than setting them up individually then you'll need
this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print
system type unless
# yours is non-standard. Currently supported print
systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
printing = lprng
# Uncomment this if you want a guest account, you must
add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each
machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level
security. See
# security_level.txt for details.
security = user
; security = share
# Use password server option only with security =
server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name]
[My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of
the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba
documentation.
# Do not enable this option unless you have read those
documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following is needed to keep smbclient from
spouting spurious errors
# when Samba is built with support for SSL.
; ssl CA certFile =
/usr/share/ssl/certs/ca-bundle.crt
# The following are needed to allow password changing
from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb
passwd file' above.
# NOTE2: You do NOT need these to allow workstations
to change only
# the encrypted SMB passwords. They allow the
Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*password* %n\n
*Retype*new*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
# You can use PAM's password change control flag for
Samba. If
# enabled, then PAM will be used for password changes
when requested
# by an SMB client instead of the program listed in
passwd program.
# It should be possible to enable this without
changing your passwd
# chat parameter for most setups.
pam password change = yes
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise
your configuration
# on a per machine basis. The %m gets replaced with
the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# This parameter will control whether or not Samba
should obey PAM's
# account and session management directives. The
default behavior is
# to use PAM for clear text authentication only and to
ignore any
# account or session management. Note that Samba
always ignores PAM
# for authentication in the case of encrypt passwords
= yes
;obey pam restrictions = yes
# Most people will find that this option gives better
performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192
SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you
must list them
# here. See the man page for details.
interfaces = 192.168.6.0/24
;192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see
below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets
here
remote announce = 192.168.6.255
;192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to
become a master
# browser on your network. Otherwise the normal
election rules apply
;local master = no
local master = yes
# OS Level determines the precedence of this server in
master browser
# elections. The default value should be reasonable
os level = 33
# Domain Master specifies Samba to be the Domain
Master Browser. This
# allows Samba to collate browse lists between
subnets. Don't use this
# if you already have a Windows NT domain controller
doing this job
domain master = yes
# Preferred Master causes Samba to force a local
browser election on startup
# and gives it a slightly higher chance of winning the
election
; preferred master = yes
# Enable this if you want Samba to be a domain logon
server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a
per-machine or
# per user logon script
# run a specific logon batch file per workstation
(machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and
WinNT)
# %L substitutes for this servers netbios name,
%U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to
enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to
be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS
Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution
queries on
# behalf of a non WINS capable client, for this to
work there must be
# at least one WINS Server on the network. The default
is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to
resolve NetBIOS names
# via DNS nslookups. The built-in default for versions
1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is
_no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS
files
; default case = lower
# Be very careful with case sensitivity - it can break
things!
; case sensitive = no
#============================ Share Definitions
==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
valid users = %S
create mode = 0664
directory mode = 0775
# If you want users samba doesn't recognize to be
mapped to a guest user
; map to guest = bad user
# Un-comment the following and create the netlogon
directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific
roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is
no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to
print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp/fileshare
read only = no
public = yes
# A publicly accessible directory, but read only,
except for people in
# the "staff" group
[public]
comment = Public Stuff
path = /home/samba
public = yes
writable = yes
printable = no
write list = @staff
# Other examples.
#
# A private printer, usable only by fred. Spool data
will be placed in fred's
# home directory. Note that fred must have write
access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /home/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that
fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each
machine that connects
# this allows you to tailor configurations to incoming
machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is
connecting.
;[pchome]
; comment = PC Directories
; path = /usr/local/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all
users. Note that all files
# created in the directory by users will be owned by
the default user, so
# any user with access can delete any other user's
files. Obviously this
# directory must be writable by the default user.
Another user could of course
# be specified, in which case all files would be owned
by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a
directory so that two
# users can place files there that will be owned by
the specific users. In this
# setup, the directory should be writable by both
users and should have the
# sticky bit set on it to prevent abuse. Obviously
this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
Please reply me with your response,
Thank alots in advance....
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
More information about the smb-clients
mailing list