[Samba] Unable to join domain
L.P.H. van Belle
belle at bazuin.nl
Tue Oct 12 15:14:51 UTC 2021
Hai Patrick,
Your havent configured it, and i dint show the full output.
This part.
> timedatectl show-timesync
> FallbackNTPServers=0.arch.pool.ntp.org 1.arch.pool.ntp.org
> 2.arch.pool.ntp.org 3.arch.pool.ntp.org
> ServerName=0.arch.pool.ntp.org
> ServerAddress=192.48.105.15
That shows mw its not configured.
Can use /etc/systemd/timesyncd.conf to configure or as i did, in the network config
and use it "per" interface.
I hope this explains a bit more.
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> Patrick Goetz via samba
> Verzonden: dinsdag 12 oktober 2021 16:43
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] Unable to join domain
>
>
>
> On 10/12/21 04:27, Rowland Penny via samba wrote:
> > On Tue, 2021-10-12 at 11:14 +0200, L.P.H. van Belle via samba wrote:
> >> Ow yes, this can work fine.
> >>
> >> AD-DC, time is given to the pc's over the AD. (not NTP directly)..
> >> sure you can configure that, but i didnt.
> >>
> >> Members, systemd-timedated used the AD-DC its NTP to sync.
> >> Standalones ( i have 1, ) same.
> >>
> >> The members dont need SNTP to sync time, only the AD-DC <=> Windows
> >> And you can even overrule that, but im not doing that.
> >>
> >> timedatectl show-timesync
> >> SystemNTPServers="192.168.1.1 192.168.1.2"
> >>
> >
> > I repeat, your clients are not using the DC's directly for time, you
> > might be okay with this, but I am not, but hey, they are
> your clients :
> > -)
> >
>
> I'm not sure why this matters if the drift is less than the allowable
> kerberos time difference. But in Louis's case, he appears to have
> configured systemd-timedated to use his DC as the time/date authority:
Yes, correct.
>
>
> $ timedatectl show-timesync
> SystemNTPServers="192.168.1.1 192.168.1.2"
>
>
> I'm guessing 192.168.1.1 and 192.168.1.2 are his DC's.
>
> Not sure why the output looks different, though. On my
> workstation when
> I run `timedatectl show-timesync` I get:
( i get same but only my configured NTP servers. )
>
>
> [pgoetz at frog ~]$ timedatectl show-timesync
> FallbackNTPServers=0.arch.pool.ntp.org 1.arch.pool.ntp.org
> 2.arch.pool.ntp.org 3.arch.pool.ntp.org
> ServerName=0.arch.pool.ntp.org
> ServerAddress=192.48.105.15
> RootDistanceMaxUSec=5s
> PollIntervalMinUSec=32s
> PollIntervalMaxUSec=34min 8s
> PollIntervalUSec=34min 8s
> NTPMessage={ Leap=0, Version=4, Mode=4, Stratum=2, Precision=-24,
> RootDelay=28.228ms, RootDispersion=33.508ms, Reference=81060F1D,
> OriginateTimestamp=Tue 2021-10-12 09:15:52 CDT, ReceiveTimestamp=Tue
> 2021-10-12 09:15:52 CDT, TransmitTimestamp=Tue 2021-10-12
> 09:15:52 CDT,
> DestinationTimestamp=Tue 2021-10-12 09:15:52 CDT, Ignored=no
> PacketCount=507, Jitter=2.230ms }
> Frequency=-1595833
>
>
>
>
>
> > Rowland
> >
> >
> >
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
More information about the samba
mailing list