[Samba] Windows 10 cannot connect without SMB1

[Reindl Harald]

Am 01.03.21 um 22:41 schrieb Roy Eastwood via samba:
> On 01 March 2021 18:08 Gregory Sloop wrote:
>> I haven't followed this thread closely at all - but how about simply really
> limiting
>> the players.
>> Reduce the network to just the DC's and client that's supposed to join the
>> domain those DC's hold.
>>
>> Unplug everything else from the network.
>>
> Yes I agree;  In an earlier post the OP mentioned that the clients and the
> server were on separate subnets connected by VPN;   if so I would connect a
> Windows 10 client directly to the same subnet as the DC and see if a join works
> OK. If it does it would implicate the VPN etc is blocking SMB2/3 protocols.

broad cast stuff typically don't make it over VPN and frankly i find it 
somehow pervert to *start* a new setup with the one and only client on a 
VPN instead build up the network step-by-step

adding additional layers from the begin is always a terrible idea unless 
you have much luck and everything works fine out-of-the-box