[Samba] Problems with Internal DNS Samba 4

[Marcio Demetrio Bacci]

Hi,

> 127.0.01 should be ... Ah you know.. Your missing a "dot"..
Sorry, it was lack of attention. I'm tired!

I will join the domain a third DC (samba4-dc3). So just install bind9,
configure bind9_dlz and join with the command "
samba-tool domain join empresa.com.br DC -k yes --server=
samba4-dc1.empresa.com.br --dns-backend=BIND9_DLZ" ?

Regards,

Márcio Bacci


Em seg, 2 de set de 2019 às 10:30, L.P.H. van Belle via samba <
samba at lists.samba.org> escreveu:

> Marcio,
>
> Just so you know what was wrong.
>
> > listen-on port 53 { 192.168.1.20; 127.0.01; };
>
> The Bin9 "not starting problem " wrong was..
>
> 127.0.01 should be ... Ah you know.. Your missing a "dot"..
>
> But good you made it.
>
>
> Greetz,
>
> Louis
>
>
>
>
> > -----Oorspronkelijk bericht-----
> > Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> > Marcio Demetrio Bacci via samba
> > Verzonden: maandag 2 september 2019 15:21
> > Aan: Rowland penny
> > CC: sambalist
> > Onderwerp: Re: [Samba] Problems with Internal DNS Samba 4
> >
> > Hi,
> >
> > >If you are running Bind9 on the other DC, then yes.
> > Is there any problem running bind9 on both DCs?
> >
> > Regards,
> >
> > Márcio Bacci
> >
> > Em seg, 2 de set de 2019 às 10:16, Rowland penny via samba <
> > samba at lists.samba.org> escreveu:
> >
> > > On 02/09/2019 14:09, Marcio Demetrio Bacci wrote:
> > > > Hi,
> > > >
> > > > I have solved.
> > > >
> > > > I change parameter "listen-on port 53", as follows:
> > > > From:
> > > > listen-on port 53 { 192.168.1.20; 127.0.01; };
> > > >
> > > > To:
> > > > listen-on port 53 { any; };
> > > >
> > > > netstat -lntup | grep 53
> > > > tcp        0      0 0.0.0.0:81 <http://0.0.0.0:81>
> > > >  0.0.0.0:*               OUÇA       534/lighttpd
> > > > tcp        0      0 192.168.1.20:53 <http://192.168.1.20:53>
> > > >  0.0.0.0:*               OUÇA       1930/named
> > > > tcp        0      0 127.0.0.1:53 <http://127.0.0.1:53>
> > > >  0.0.0.0:*               OUÇA       1930/named
> > > > tcp        0      0 127.0.0.1:953 <http://127.0.0.1:953>
> > > > 0.0.0.0:*               OUÇA       1930/named
> > > > tcp        0      0 0.0.0.0:49153 <http://0.0.0.0:49153>
> > > > 0.0.0.0:*               OUÇA       662/samba: task[dce
> > > > tcp6       0      0 :::81                   :::*      OUÇA
> > > > 534/lighttpd
> > > > tcp6       0      0 :::49153                :::*      OUÇA
> > > > 662/samba: task[dce
> > > > udp        0      0 192.168. 1.20:53          0.0.0.0:* 1930/named
> > > > udp        0      0 127.0.0.1:53 <http://127.0.0.1:53>
> > > >  0.0.0.0:*                           1930/named
> > > >
> > > >
> > > > Should I perform the same procedures on DC 2 or is there
> > any difference?
> > > >
> > > If you are running Bind9 on the other DC, then yes.
> > >
> > > Rowland
> > >
> > >
> > >
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions:  https://lists.samba.org/mailman/options/samba
> > >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> >
> >
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>