[Samba] Problems with Internal DNS Samba 4

[L.P.H. van Belle]

Marcio, 

Just so you know what was wrong. 

> listen-on port 53 { 192.168.1.20; 127.0.01; }; 

The Bin9 "not starting problem " wrong was..  

127.0.01 should be ... Ah you know.. Your missing a "dot".. 

But good you made it. 


Greetz, 

Louis




> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Marcio Demetrio Bacci via samba
> Verzonden: maandag 2 september 2019 15:21
> Aan: Rowland penny
> CC: sambalist
> Onderwerp: Re: [Samba] Problems with Internal DNS Samba 4
> 
> Hi,
> 
> >If you are running Bind9 on the other DC, then yes.
> Is there any problem running bind9 on both DCs?
> 
> Regards,
> 
> Márcio Bacci
> 
> Em seg, 2 de set de 2019 às 10:16, Rowland penny via samba <
> samba at lists.samba.org> escreveu:
> 
> > On 02/09/2019 14:09, Marcio Demetrio Bacci wrote:
> > > Hi,
> > >
> > > I have solved.
> > >
> > > I change parameter "listen-on port 53", as follows:
> > > From:
> > > listen-on port 53 { 192.168.1.20; 127.0.01; };
> > >
> > > To:
> > > listen-on port 53 { any; };
> > >
> > > netstat -lntup | grep 53
> > > tcp        0      0 0.0.0.0:81 <http://0.0.0.0:81>
> > >  0.0.0.0:*               OUÇA       534/lighttpd
> > > tcp        0      0 192.168.1.20:53 <http://192.168.1.20:53>
> > >  0.0.0.0:*               OUÇA       1930/named
> > > tcp        0      0 127.0.0.1:53 <http://127.0.0.1:53>
> > >  0.0.0.0:*               OUÇA       1930/named
> > > tcp        0      0 127.0.0.1:953 <http://127.0.0.1:953>
> > > 0.0.0.0:*               OUÇA       1930/named
> > > tcp        0      0 0.0.0.0:49153 <http://0.0.0.0:49153>
> > > 0.0.0.0:*               OUÇA       662/samba: task[dce
> > > tcp6       0      0 :::81                   :::*      OUÇA
> > > 534/lighttpd
> > > tcp6       0      0 :::49153                :::*      OUÇA
> > > 662/samba: task[dce
> > > udp        0      0 192.168. 1.20:53          0.0.0.0:* 1930/named
> > > udp        0      0 127.0.0.1:53 <http://127.0.0.1:53>
> > >  0.0.0.0:*                           1930/named
> > >
> > >
> > > Should I perform the same procedures on DC 2 or is there 
> any difference?
> > >
> > If you are running Bind9 on the other DC, then yes.
> >
> > Rowland
> >
> >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> >
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>