[Samba] is WMI through RSAT supported?

[Daniel Carrasco Marín]

2015-05-21 15:59 GMT+02:00 L.P.H. van Belle <belle at bazuin.nl>:

> GPO that fails ..  check if you did set the option.
> Always wait for the network at computer startup and logon..
>
> read :
> https://technet.microsoft.com/en-us/magazine/gg486839.aspx
>
>
> greetz,
>
> Louis
>
>
> >-----Oorspronkelijk bericht-----
> >Van: danielmadrid19 at gmail.com
> >[mailto:samba-bounces at lists.samba.org] Namens Daniel Carrasco Marín
> >Verzonden: donderdag 21 mei 2015 15:30
> >Aan: James
> >CC: samba
> >Onderwerp: Re: [Samba] is WMI through RSAT supported?
> >
> >Thanks, i'll try to check if works, but i've the firewall
> >disabled. Is a
> >problem because sometimes the GPO fails, and if i've to install RSAT on
> >every client machine to see the GPO status... For example, now i've
> >problems with drives map on a machine: one user is failing and
> >drives are
> >not mapped. Other users in that machine works fine, and that user in
> >another machine works too, then is a problem with that user and that
> >machine. I need the RSAT to check that.
> >
> >Greetings!!
> >
> >2015-05-18 21:32 GMT+02:00 James <lingpanda101 at gmail.com>:
> >
> >> On 5/18/2015 11:54 AM, Daniel Carrasco Marín wrote:
> >> > Hi, i'm trying to get GPO result info from a remote
> >computer but i get an
> >> > error "RPC server is not avaible".
> >> > Is supported by samba 4.2.1?
> >> >
> >> > if i try to get the same info from local is working, and
> >i've checked the
> >> > WMI security on remote computer and is OK.
> >> >
> >> > Thanks!!
> >> I dug a bit further and ran WMI Diagnosis Utility -- Version
> >2.2 on the
> >> machine giving this error. It gave me the following result.
> >>
> >> Windows Firewall 'Windows Management Instrumentation (WMI)'
> >group rule:
> >> ............................................. DISABLED.
> >> 31210 15:26:16 (0) ** => This will prevent any WMI remote
> >connectivity
> >> to/from this machine.
> >> 31211 15:26:16 (0) **    - You can adjust the configuration
> >by executing
> >> the following command:
> >> 31212 15:26:16 (0) **    i.e. 'NETSH.EXE ADVFIREWALL
> >FIREWALL SET RULE
> >> GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
> >> 31213 15:26:16 (0) ** Note: With this command all inbound
> >and outbound
> >> WMI rules are activated at once!
> >> 31214 15:26:16 (0) **       You can also enable each individual rule
> >> instead of activating the group rule.
> >>
> >>
> >> Running this command fixed my issue.
> >>
> >>
> >>
> >> --
> >> -James
> >>
> >> --
> >> To unsubscribe from this list go to the following URL and read the
> >> instructions:  https://lists.samba.org/mailman/options/samba
> >>
> >--
> >To unsubscribe from this list go to the following URL and read the
> >instructions:  https://lists.samba.org/mailman/options/samba
> >
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>

Thanks for the info.

Finally i've found the problem... was just a problem with internal card
reader.

Greetings!!