[Samba] is WMI through RSAT supported?

[L.P.H. van Belle]

GPO that fails ..  check if you did set the option. 
Always wait for the network at computer startup and logon.. 

read : 
https://technet.microsoft.com/en-us/magazine/gg486839.aspx 


greetz, 

Louis


>-----Oorspronkelijk bericht-----
>Van: danielmadrid19 at gmail.com 
>[mailto:samba-bounces at lists.samba.org] Namens Daniel Carrasco Marín
>Verzonden: donderdag 21 mei 2015 15:30
>Aan: James
>CC: samba
>Onderwerp: Re: [Samba] is WMI through RSAT supported?
>
>Thanks, i'll try to check if works, but i've the firewall 
>disabled. Is a
>problem because sometimes the GPO fails, and if i've to install RSAT on
>every client machine to see the GPO status... For example, now i've
>problems with drives map on a machine: one user is failing and 
>drives are
>not mapped. Other users in that machine works fine, and that user in
>another machine works too, then is a problem with that user and that
>machine. I need the RSAT to check that.
>
>Greetings!!
>
>2015-05-18 21:32 GMT+02:00 James <lingpanda101 at gmail.com>:
>
>> On 5/18/2015 11:54 AM, Daniel Carrasco Marín wrote:
>> > Hi, i'm trying to get GPO result info from a remote 
>computer but i get an
>> > error "RPC server is not avaible".
>> > Is supported by samba 4.2.1?
>> >
>> > if i try to get the same info from local is working, and 
>i've checked the
>> > WMI security on remote computer and is OK.
>> >
>> > Thanks!!
>> I dug a bit further and ran WMI Diagnosis Utility -- Version 
>2.2 on the
>> machine giving this error. It gave me the following result.
>>
>> Windows Firewall 'Windows Management Instrumentation (WMI)' 
>group rule:
>> ............................................. DISABLED.
>> 31210 15:26:16 (0) ** => This will prevent any WMI remote 
>connectivity
>> to/from this machine.
>> 31211 15:26:16 (0) **    - You can adjust the configuration 
>by executing
>> the following command:
>> 31212 15:26:16 (0) **    i.e. 'NETSH.EXE ADVFIREWALL 
>FIREWALL SET RULE
>> GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
>> 31213 15:26:16 (0) ** Note: With this command all inbound 
>and outbound
>> WMI rules are activated at once!
>> 31214 15:26:16 (0) **       You can also enable each individual rule
>> instead of activating the group rule.
>>
>>
>> Running this command fixed my issue.
>>
>>
>>
>> --
>> -James
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions:  https://lists.samba.org/mailman/options/samba
>>
>-- 
>To unsubscribe from this list go to the following URL and read the
>instructions:  https://lists.samba.org/mailman/options/samba
>