[Samba] Samba + CUPS

José Eduardo S. C. Xavier josescxavier at gmail.com
Thu Oct 23 15:55:18 MDT 2014


FIINNNAAALLLYYY IT IS WORKING!!! :D

So, I tried jessie but every time I tried to install samba rpi doesn't boot
anymore and give me the following error: http://i.imgur.com/9Sh5jta.jpg

So, I use wheazzy and install cups then I change the apt sources to jessie
and only installede samba from there and finally it is working!!!!!!!!

2014-10-23 17:38 GMT+01:00 José Eduardo S. C. Xavier <josescxavier at gmail.com
>:

> error number: 0x000000d8
> Windows 8 - 64bits - doesn't work
> Windows 7 - 32bits - it works
>
>
> 2014-10-23 17:34 GMT+01:00 José Eduardo S. C. Xavier <
> josescxavier at gmail.com>:
>
> Hi agai,
>> So I installed debian jessie and install cups + samba. It is working on
>> w7 but not in w8 but now the problem is diferent. It ask to install the
>> drivers, it install the drivers but then says it can't connect to the
>> printer :s
>>
>> 2014-10-21 16:34 GMT+01:00 Harry Jede <walk2sun at arcor.de>:
>>
>>> On 17:32:18 wrote L.P.H. van Belle:
>>> > I use CUPS, Raw, point and print  setup.
>>> > i have HP printers, and before you can upload the printer driver jou
>>> > must disable SNMP communication in de driver, If you forget this,
>>> > you wont be able to upload them. there is a HP tool for this. and i
>>> > use the global drivers.
>>> >
>>> > https://wiki.samba.org/index.php/Samba_as_a_print_server
>>> >
>>> >
>>> > If you have Xerox printers, wel.. Xerox says.. get an windows server,
>>> > so im removing my Xerox printers from my network.
>>> > and tip...
>>> >
>>> > Install the windows X64 drivers from a Windows x64 pc.
>>> > same for X32 install from x32 windows.
>>> >
>>> > and the biggest tip...
>>> > Since Debian Jessie is still in development... if you setup works
>>> > now. freeze it, keep it until Jessie gets stable.
>>> > last.. to get snmp working with the printer drivers, someone has
>>> > posted something on the list about this, but you need to search for
>>> > that..
>>> Look down under ;-)
>>>
>>> >
>>> > Louis
>>>
>>> ----------  Weitergeleitete Nachricht  ----------
>>>
>>> Betreff: Re: [Samba] samba print server and windows driver snmp request
>>> Datum: Donnerstag, 31. Juli 2014
>>> Von: cyril at toile-libre.org
>>> An: samba at lists.samba.org
>>>
>>> Hi,
>>>
>>> this method has answered my question
>>>
>>> In the smb.conf global section use
>>>
>>> enumports command = /var/scripts/listports.sh
>>>
>>> create the script /var/scripts/listports.sh and make it executable :
>>>
>>> #!/bin/bash
>>> echo "printer1"
>>> echo "printer2"
>>> echo "printer3"
>>>
>>> Now, It's possible to use the printer hostname or ip address
>>>
>>> Now, samba don't just show the only one Samba local port for all the
>>> printer and i can associate one printer to one port.
>>>
>>> Now the SNMP query of the windows driver now can have an anwser from
>>> the printer.
>>>
>>> :)
>>>
>>> Cyril
>>> --
>>>
>>> Regards
>>>         Harry Jede
>>> --
>>> To unsubscribe from this list go to the following URL and read the
>>> instructions:  https://lists.samba.org/mailman/options/samba
>>>
>>
>>
>


More information about the samba mailing list