[Samba] Samba + CUPS

[José Eduardo S. C. Xavier]

error number: 0x000000d8
Windows 8 - 64bits - doesn't work
Windows 7 - 32bits - it works


2014-10-23 17:34 GMT+01:00 José Eduardo S. C. Xavier <josescxavier at gmail.com
>:

> Hi agai,
> So I installed debian jessie and install cups + samba. It is working on w7
> but not in w8 but now the problem is diferent. It ask to install the
> drivers, it install the drivers but then says it can't connect to the
> printer :s
>
> 2014-10-21 16:34 GMT+01:00 Harry Jede <walk2sun at arcor.de>:
>
>> On 17:32:18 wrote L.P.H. van Belle:
>> > I use CUPS, Raw, point and print  setup.
>> > i have HP printers, and before you can upload the printer driver jou
>> > must disable SNMP communication in de driver, If you forget this,
>> > you wont be able to upload them. there is a HP tool for this. and i
>> > use the global drivers.
>> >
>> > https://wiki.samba.org/index.php/Samba_as_a_print_server
>> >
>> >
>> > If you have Xerox printers, wel.. Xerox says.. get an windows server,
>> > so im removing my Xerox printers from my network.
>> > and tip...
>> >
>> > Install the windows X64 drivers from a Windows x64 pc.
>> > same for X32 install from x32 windows.
>> >
>> > and the biggest tip...
>> > Since Debian Jessie is still in development... if you setup works
>> > now. freeze it, keep it until Jessie gets stable.
>> > last.. to get snmp working with the printer drivers, someone has
>> > posted something on the list about this, but you need to search for
>> > that..
>> Look down under ;-)
>>
>> >
>> > Louis
>>
>> ----------  Weitergeleitete Nachricht  ----------
>>
>> Betreff: Re: [Samba] samba print server and windows driver snmp request
>> Datum: Donnerstag, 31. Juli 2014
>> Von: cyril at toile-libre.org
>> An: samba at lists.samba.org
>>
>> Hi,
>>
>> this method has answered my question
>>
>> In the smb.conf global section use
>>
>> enumports command = /var/scripts/listports.sh
>>
>> create the script /var/scripts/listports.sh and make it executable :
>>
>> #!/bin/bash
>> echo "printer1"
>> echo "printer2"
>> echo "printer3"
>>
>> Now, It's possible to use the printer hostname or ip address
>>
>> Now, samba don't just show the only one Samba local port for all the
>> printer and i can associate one printer to one port.
>>
>> Now the SNMP query of the windows driver now can have an anwser from
>> the printer.
>>
>> :)
>>
>> Cyril
>> --
>>
>> Regards
>>         Harry Jede
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions:  https://lists.samba.org/mailman/options/samba
>>
>
>