[Samba] Samba + CUPS

[L.P.H. van Belle]

Ok, 
 
here what to do. 
 
nano /etc/apt/sources.list.d/debian-backports.list

# Debian Wheezy Backports repository
# stable = wheezy
deb http://ftp.debian.org/debian/ wheezy-backports main contrib non-free
#deb-src http://ftp.debian.org/debian/ wheezy-backports main contrib non-free

nano /etc/apt/preferences.d/preferences
Package: *
Pin: release n=wheezy,o=Debian
Pin-Priority: 500
 
Package: *
Pin: release n=wheezy,l=Debian-Security
Pin-Priority: 500
 
Package: *
Pin: release n=wheezy-updates
Pin-Priority: 500
 
Package: *
Pin: release n=wheezy-backports
Pin-Priority: 400
 
Package: *
Pin: release o=Dell Inc,a=wheezy,n=wheezy
Pin-Priority: 300
 
Package: *
Pin: release a=testing
Pin-Priority: 100
 
Package: *
Pin: release a=unstable
Pin-Priority: 50
 
Package: *
Pin: release o=SerNet,a=wheezy,n=wheezy
Pin-Priority: 400
 
 
now.
 
 
apt-get install -t wheezy-backports samba 
samba wil be upgraded from 3.6.6 ( wheezy ) to 4.1.11 ( or 12 )  
 
If you dont like the -t wheezy-backports then change i the above file ( preferences ) the value 400 to 500. 
BUT !!! this wil upgrade all packages from backports which are already on your system. 
use with care. 
 
Louis
 

Van: José Eduardo S. C. Xavier [mailto:josescxavier at gmail.com] 
Verzonden: maandag 20 oktober 2014 14:27
Aan: L.P.H. van Belle
CC: samba at lists.samba.org
Onderwerp: Re: [Samba] Samba + CUPS



The samba from wheezy backports is the 3.6.6, right? it is what I had installed with sudo apt-get install samba.


2014-10-20 13:24 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:
 stop..

Dont install samba4.

Of use sernet-samba
or use samba from wheezy backports.

samba4 is the most bad version.



>-----Oorspronkelijk bericht-----
>Van: josescxavier at gmail.com
>[mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C. Xavier
>Verzonden: maandag 20 oktober 2014 14:22
>Aan: Sven Schwedas
>CC: samba at lists.samba.org
>Onderwerp: Re: [Samba] Samba + CUPS
>
>I'm removing samba and install samba4 from apt-get to try if it works.
>
>2014-10-20 13:19 GMT+01:00 Sven Schwedas <sven.schwedas at tao.at>:
>
>> On 2014-10-20 14:13, José Eduardo S. C. Xavier wrote:
>> > Hi,
>> > I have configured a CUPS printer server with samba and it
>worked with
>> > Windows 7 32/64bits but now with windows 8 it can't get
>the drivers.
>> >
>> > I found it https://bugzilla.samba.org/show_bug.cgi?id=9474
>but doesn't
>> know
>> > how to use the patch to solve the problem. I'm using a
>raspberry pi.
>>
>> By updating to a more recent Samba version, as you were
>instructed to on
>> the bugtracker.
>>
>> --
>> Mit freundlichen Grüßen, / Best Regards,
>> Sven Schwedas
>> Systemadministrator
>> TAO Beratungs- und Management GmbH | Lendplatz 45 | A - 8020 Graz
>> Mail/XMPP: sven.schwedas at tao.at | +43 (0)680 301 7167
>> http://software.tao.at
>>
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions:  https://lists.samba.org/mailman/options/samba
>>
>--
>To unsubscribe from this list go to the following URL and read the
>instructions:  https://lists.samba.org/mailman/options/samba
>