[Samba] Samba + CUPS
Rowland Penny
rowlandpenny at googlemail.com
Mon Oct 20 10:38:12 MDT 2014
On 20/10/14 17:20, José Eduardo S. C. Xavier wrote:
> Result:http://pastebin.com/nLPKzn4a*
> *
> Did you install it on a RPI?
No, but it should work just the same, all the packages are available for
armhf
Rowland
>
> I think I'll try on a clen rpi image.
>
> 2014-10-20 16:40 GMT+01:00 Rowland Penny <rowlandpenny at googlemail.com
> <mailto:rowlandpenny at googlemail.com>>:
>
> On 20/10/14 16:35, José Eduardo S. C. Xavier wrote:
>
> I also tried that: http://pastebin.com/Kea0xCTy
>
> 2014-10-20 16:33 GMT+01:00 Sébastien Le Ray
> <sebastien-samba at orniz.org <mailto:sebastien-samba at orniz.org>>:
>
> apt-get -t wheezy-backports install winbind
>
> Regards
> Le 20/10/2014 17:26, José Eduardo S. C. Xavier a écrit :
>
> It now fails with the following error:
> http://pastebin.com/CE5386Mh
> When I do sudo apt-get install winbind there is a
> reference to a 3.6.6
> version of it:
>
> pi at lynx ~ $ sudo apt-get install winbind
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> Some packages could not be installed. This may mean
> that you have
> requested an impossible situation or if you are using
> the unstable
> distribution that some required packages have not yet
> been created
> or been moved out of Incoming.
> The following information may help to resolve the
> situation:
>
> The following packages have unmet dependencies:
> winbind : Depends: libwbclient0 (=
> 2:3.6.6-6+deb7u4) but
> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
> Depends: samba-common (=
> 2:3.6.6-6+deb7u4) but
> 2:4.1.11+dfsg-1~bpo70+1 is to be installed
> Recommends: libpam-winbind but it is not
> going to be installed
> Recommends: libnss-winbind but it is not
> going to be installed
> E: Unable to correct problems, you have held broken
> packages.
> pi at lynx ~ $
>
>
>
> 2014-10-20 16:18 GMT+01:00 José Eduardo S. C. Xavier <
> josescxavier at gmail.com <mailto:josescxavier at gmail.com>
>
> :
> 2 days of compile process
> https://lists.samba.org/archive/samba-technical/2012-August/086330.html
> :s
>
> 2014-10-20 16:16 GMT+01:00 José Eduardo S. C. Xavier <
> josescxavier at gmail.com
> <mailto:josescxavier at gmail.com>>:
>
> I can try to compile from source if you guide me
> on this process.
>
> 2014-10-20 16:09 GMT+01:00 José Eduardo S. C.
> Xavier <
> josescxavier at gmail.com
> <mailto:josescxavier at gmail.com>>:
>
> How can I know If I it is installing the
> current version? saw someone
>
> with a similar problem because have
> installed a armv7 package instead
> of a
> armv6.
>
> 2014-10-20 16:00 GMT+01:00 L.P.H. van
> Belle <belle at bazuin.nl
> <mailto:belle at bazuin.nl>>:
>
> ok, try the following.
>
> 1) make a backup of /etc/samba
> /var/lib/samba /var/cache/samba
>
> 2
> this removes and purges/clears all of
> samba
> apt-get remove --purge `dpkg -l | grep
> samba | cut -f3 -d" "`
>
> if needed apt-get install mlocate
> updatedb
> locate samba
> clear the rest of it.
>
> install backports samba again.
>
> Louis
>
>
> ------------------------------
> *Van:* José Eduardo S. C. Xavier
> [mailto:josescxavier at gmail.com
> <mailto:josescxavier at gmail.com>]
> *Verzonden:* maandag 20 oktober 2014 16:57
> *Aan:* L.P.H. van Belle
>
> *CC:* samba at lists.samba.org
> <mailto:samba at lists.samba.org>
> *Onderwerp:* Re: [Samba] Samba + CUPS
>
>
> they look like for arm
>
> 2014-10-20 15:56 GMT+01:00 José
> Eduardo S. C. Xavier <
> josescxavier at gmail.com
> <mailto:josescxavier at gmail.com>>:
>
> pi at lynx ~ $ dpkg -l | grep samba
>
> ii python-samba
> 2:4.1.11+dfsg-1~bpo70+1 armhf
> Python bindings
> for
> Samba
> iF samba
> 2:4.1.11+dfsg-1~bpo70+1 armhf
> SMB/CIFS file,
> print,
> and login server for Unix
> ii samba-common
> 2:4.1.11+dfsg-1~bpo70+1 all
> common files
> used by
> both the Samba server and client
> ii samba-common-bin
> 2:4.1.11+dfsg-1~bpo70+1 armhf
> Samba common
> files
> used by both the server and the client
> ii samba-dsdb-modules
> 2:4.1.11+dfsg-1~bpo70+1 armhf
> Samba Directory
> Services Database
> ii samba-libs:armhf
> 2:4.1.11+dfsg-1~bpo70+1 armhf
> Samba core
> libraries
> ii samba-vfs-modules
> 2:4.1.11+dfsg-1~bpo70+1 armhf
> Samba Virtual
> FileSystem plugins
> pi at lynx ~ $
>
>
> 2014-10-20 15:55 GMT+01:00 José
> Eduardo S. C. Xavier <
> josescxavier at gmail.com
> <mailto:josescxavier at gmail.com>>:
>
> I think the problem is that I'm
> running it on a raspberry pi (ARM)
>
> and the source should be for
> x86/x64, no?
>
> 2014-10-20 15:54 GMT+01:00
> L.P.H. van Belle
> <belle at bazuin.nl
> <mailto:belle at bazuin.nl>>:
>
> please post the output of :
>
> dpkg -l | grep samba
> to make sure there is no
> old samba4 things.
>
>
> -----Oorspronkelijk
> bericht-----
>
> Van:
> josescxavier at gmail.com
> <mailto:josescxavier at gmail.com>
> [mailto:samba-bounces at lists.samba.org
> <mailto:samba-bounces at lists.samba.org>]
> Namens José Eduardo S. C.
>
> Xavier
>
> Verzonden: maandag 20
> oktober 2014 16:46
> Aan: Rowland Penny
>
> >CC:
> samba at lists.samba.org
> <mailto:samba at lists.samba.org>
>
> Onderwerp: Re: [Samba]
> Samba + CUPS
>
> http://pastebin.com/Apr8HJPj
> it fails to run :s
>
> 2014-10-20 14:02
> GMT+01:00 José Eduardo
> S. C. Xavier
> <josescxavier at gmail.com <mailto:josescxavier at gmail.com>
>
> :
> lets try it :)
>
> 2014-10-20 13:37
> GMT+01:00 Rowland
> Penny
>
> <rowlandpenny at googlemail.com
> <mailto:rowlandpenny at googlemail.com>>:
>
> On 20/10/14 13:27,
> José Eduardo S. C.
> Xavier wrote:
>
> The samba
> from wheezy
> backports is
> the 3.6.6,
> right? it is
> what I had
>
> installed with
> sudo apt-get
> install samba.
>
> 2014-10-20
> 13:24
> GMT+01:00
> L.P.H. van
> Belle
> <belle at bazuin.nl
> <mailto:belle at bazuin.nl>>:
>
> stop..
>
> Dont
> install samba4.
>
> Of use
> sernet-samba
> or use
> samba
> from
> wheezy
> backports.
>
> samba4
> is the
> most
> bad
> version.
>
>
>
>
> -----Oorspronkelijk
> bericht-----
>
> Van:
> josescxavier at gmail.com
> <mailto:josescxavier at gmail.com>
> [mailto:samba-bounces at lists.samba.org
> <mailto:samba-bounces at lists.samba.org>]
> Namens
> José
> Eduardo
>
> S. C.
>
> Xavier
>
> Verzonden:
> maandag
> 20
> oktober
> 2014
> 14:22
> Aan:
> Sven
> Schwedas
> CC: samba at lists.samba.org
> <mailto:samba at lists.samba.org>
> Onderwerp:
> Re: [Samba]
> Samba
> + CUPS
>
> I'm removing
> samba
> and install
> samba4
> from
> apt-get
> to
>
> try if
> it works.
>
> 2014-10-20 13:19
> GMT+01:00 Sven
> Schwedas <
>
> sven.schwedas at tao.at
> <mailto:sven.schwedas at tao.at>>:
>
> On 2014-10-20
> 14:13, José Eduardo S.
> C. Xavier wrote:
>
> Hi,
>
> I have
> configured
> a CUPS
> printer
> server
> with
> samba
> and
> it
>
> worked
> with
>
> Windows
> 7 32/64bits
> but
> now
> with
> windows
> 8 it
> can't
> get
> the
> drivers.
> I found
> it
> https://bugzilla.samba.org/show_bug.cgi?id=9474
> but
> doesn't
> know
>
> how
> to
> use
> the
> patch
> to
> solve
> the
> problem.
> I'm
> using
> a
>
> raspberry
> pi.
>
> By
> updating
> to
> a more
> recent
> Samba
> version,
> as
> you
> were
>
> instructed
> to
> on
>
>
> the bugtracker.
>
> --
> Mit
> freundlichen
> Grüßen,
> / Best
> Regards,
> Sven
> Schwedas
> Systemadministrator
> TAO
> Beratungs-
> und
> Management
> GmbH
> | Lendplatz
> 45
> | A
> -
>
> 8020
> Graz
>
> Mail/XMPP:
> sven.schwedas at tao.at
> <mailto:sven.schwedas at tao.at>
> | +43 (0)680 301
> 7167
> <tel:%2B43%20%280%29680%20301%207167>
>
> <%2B43%20%280%29680%20301%207167>
>
> http://software.tao.at
>
>
> --
> To
> unsubscribe
> from
> this
> list
> go
> to
> the
> following
> URL
>
> and read
> the
>
> instructions:
> https://lists.samba.org/mailman/options/samba
>
> --
>
> To
> unsubscribe
> from
> this
> list
> go
> to
> the following
> URL
>
> and
> read the
>
> instructions:
> https://lists.samba.org/mailman/options/samba
>
>
>
>
> No
> the samba
> from
> backports
> is
> not 3.6.6,
> it
> is
> (at the
>
> moment) 4.1.11
>
> To install it, you
> would use:
>
> apt-get -t
> wheezy-backports
> install samba
>
> Rowland
>
>
> --
> To unsubscribe
> from this list
> go to the
> following URL
> and read
>
> the
>
> instructions:
> https://lists.samba.org/mailman/options/samba
>
>
> --
>
> To unsubscribe from
> this list go to the
> following URL and read the
> instructions:
> https://lists.samba.org/mailman/options/samba
>
>
> Hi, this is what I use to install samba from backports:
>
> apt-get -t wheezy-backports install samba attr krb5-config
> krb5-user ntp bind9utils dnsutils winbind libpam-winbind
> libpam-krb5 libnss-winbind libsmbclient smbclient
>
>
> Rowland
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
More information about the samba
mailing list