[Samba] Samba 4 AD share: Access denied

Ryan Ashley ryana at reachtechfp.com
Thu Aug 7 12:28:23 MDT 2014


Alright, I also checked and I was right, I set "uidNumber" and 
"gidNumber". Pictures are attached. So with these set, why are they not 
pulling across to my member servers?

I do have screenshots showing the correct attributes set in ADUC, but 
they're note pulling across to my member servers.

On 08/07/2014 11:22 AM, Ryan Ashley wrote:
> I figured it out, but it won't let me import it.
>
> root at dc01:~# ldbmodify -H /var/lib/samba/private/sam.ldb 
> /root/ypServ30.ldif --option="dsdb:schema update allowed"=true
> ERR: (Entry already exists) "Entry 
> CN=ypServ30,CN=RpcServices,CN=System,DC=truevine,DC=lan already 
> exists" on DN CN=ypServ30,CN=RpcServices,CN=System,dc=truevine,dc=lan 
> at block before line 5
> Modify failed after processing 0 records
> root at dc01:~#
>
> So this means it is already there, right? If so, what must I do here? 
> I am going to check, but I do not remember seeing an attribute called 
> "gidNumber", only "gid".
>
> On 08/07/2014 10:24 AM, Ryan Ashley wrote:
>> Alright, new problem. That ypServ30.ldif file is asking for all kinds 
>> of information I do not know or know how to get. I am ASSUMING the 
>> "domain dn" it is asking for is "dc=truevine,dc=lan". However, it 
>> also needs to know a NISDOMAIN variable and that I do not have a clue 
>> about. Is there a guide dedicated just to editing this file? I don't 
>> have a NIS domain to my knowledge. I just want to import the file so 
>> I can set my attributes. This is kind of complicated just to add a 
>> few (four?) attributes to my schema.
>>
>> So, what do I set all these things in the LDIF file to? Is there a 
>> way I can look them up?
>>
>> On 08/07/2014 09:42 AM, Ryan Ashley wrote:
>>> Thanks, Rowland. I just got in this morning and think it finally all 
>>> fell into place. You mentioned an LDIF file in a prior email. I 
>>> assume that if I import that LDIF file, it creates the attributes I 
>>> need. After that, I should be able to set them as you stated. Is 
>>> this correct?
>>>
>>> My current plan is to re-read your emails and find the file you 
>>> mentioned. If it does indeed add those attributes, I will import it 
>>> and try setting them as you stated. If it works, I will report 
>>> success and summarize what this entire thread was about for others 
>>> to learn from without reading it all.
>>>
>>> On 08/07/2014 05:16 AM, Rowland Penny wrote:
>>>> On 06/08/14 22:24, Ryan Ashley wrote:
>>>>> I have tried your suggestions, and some I had found prior to 
>>>>> falling back on the mailing list so I already knew some would not 
>>>>> work. I was not asked for a response after being pointed to the 
>>>>> material so I did not provide one.
>>>>>
>>>>> Yes, I am very busy as I work as the lead IT and IS specialist in 
>>>>> a small business. I cannot devote weeks to a single problem as I 
>>>>> handle dozens a day, many resolved within 24hrs. This issue has 
>>>>> been on-going due to the fact that I have already tried a ton of 
>>>>> what is out there, and as for your "Google search", dozens of 
>>>>> those are the same posts regurgitated on numerous sites. I went 
>>>>> through an entire page a week or so back and every single link on 
>>>>> the page was to the exact same post, on numerous sits that have 
>>>>> board-readers that simply read the samba lists among others and 
>>>>> duplicate the posts. Useless! I'd say out of 1.9mil results, about 
>>>>> 500k are unique. I am getting to where I dislike Google for this 
>>>>> reason, but that is another discussion.
>>>>>
>>>>> I am also happy to hear that you can afford to blow thousands on a 
>>>>> simple DVD. Low-income businesses, churches, and what-not cannot. 
>>>>> Yes, we know of open-licensing and manage it for several clients, 
>>>>> but many people are not willing to spend anything right now if 
>>>>> there is a viable alternative. Seeing that S4 has worked 
>>>>> flawlessly for two years at a few locations, this fit the client's 
>>>>> needs and we installed it. Something is just different this time. 
>>>>> I am learning a lot and intend to apply things like the group and 
>>>>> user ID's to other domains once we have it working here to avoid 
>>>>> future problems.
>>>>>
>>>>> Also, Windows has MUCH higher resource requirements than Linux. On 
>>>>> top of that $3k, how much would we have to pay to bring up the 
>>>>> hardware? Too expensive for such little gain.
>>>>>
>>>>> Finally, if you have taken some personal offense to something, 
>>>>> speak up. You offered assistance, I took what I had not already 
>>>>> tried and tried it. You did not ask for results, so I assumed the 
>>>>> fact that I was still asking for help would have been a clue that 
>>>>> the suggestion was no good. Every time anybody asked for anything, 
>>>>> including configuration files, I posted them, so there's no need 
>>>>> to be bitter. Simply point out that I may have missed something 
>>>>> and I'll try it or let you know I already did.
>>>>>
>>>>> On 8/6/2014 3:57 PM, steve wrote:
>>>>>> On Wed, 2014-08-06 at 13:50 -0400, Ryan Ashley wrote:
>>>>>>
>>>>>>> What information have I not answered fully?
>>>>>> Most of the suggestions and tips we have given. As an example, 
>>>>>> you said
>>>>>> that you wanted to add IDs to your users. You were sent a link to 
>>>>>> help
>>>>>> you look up what you said you, 'had no idea how'. You ignored 
>>>>>> that, so
>>>>>> we sent you concrete examples to try. Still nothing.
>>>>>>
>>>>>> You are a, 'VERY BUSY person', are you? Well, I can only urge 
>>>>>> everyone
>>>>>> here to jump on your case. I repeat. With a 2012 R2 licence and 
>>>>>> 90 days
>>>>>> reduced rate licence, you would have been up days ago for this 
>>>>>> side of
>>>>>> $3000
>>>>>>
>>>>>> Cheers, and EOT from us,
>>>>>> Steve
>>>>>>
>>>>>
>>>> Active Directory works differently from Linux, it uses SID's and 
>>>> RID's, Linux uses UID's and GID's. To use AD users as Linux users 
>>>> you somehow have to convert the SID's and RID's to UID's and GID's. 
>>>> There are several ways to do this by using programs like winbind, 
>>>> nslcd or sssd, but they all boil down to the same two ways, you 
>>>> either create a UID/GID from the RID or you give the user/group a 
>>>> uidNumber/gidNumber.
>>>>
>>>> That is:
>>>> A user is given a uidNumber and gidNumber
>>>> A group is given a gidNumber
>>>>
>>>> uidNumber and gidNumber are the attribute names, not uid or gid or 
>>>> anything else.
>>>>
>>>> The only way (at the moment) to ensure that your users/groups get 
>>>> the same ID everywhere in the domain is to use RFC2307 attributes.
>>>>
>>>> see here for info on RFC2307:
>>>>
>>>> https://www.ietf.org/rfc/rfc2307.txt
>>>>
>>>> How you add these RFC2307 attributes is up to you, the easiest way 
>>>> is to use ADUC, but you say that you do not have the 
>>>> UNIX-Attributes tab on your users and groups, I also had this 
>>>> problem and solved it by searching the internet. I posted a link to 
>>>> one of the pages I used, so I do not propose to go over old ground 
>>>> yet again.
>>>>
>>>> If you cannot get the ADUC tab to work for you, then you can always 
>>>> use ldb-tools to add the attributes, either by using ldbedit and 
>>>> directly modifying the user/group or by creating an ldif and using 
>>>> ldbmodify to add this. A typical ldif for a user called John Doe 
>>>> created on a windows machine would be:
>>>>
>>>> dn: CN=John Doe,CN=Users,DC=example,DC=com
>>>> changetype: modify
>>>> add: uid
>>>> uid: john
>>>> -
>>>> add: msSFU30Name
>>>> msSFU30Name: john
>>>> -
>>>> add: msSFU30NisDomain
>>>> msSFU30NisDomain: example
>>>> -
>>>> add: uidNumber
>>>> uidNumber: 10000
>>>> -
>>>> add: gidNumber
>>>> gidNumber: 10000
>>>> -
>>>> add: loginShell
>>>> loginShell: /bin/bash
>>>> -
>>>> add: unixHomeDirectory
>>>> unixHomeDirectory: /home/john
>>>> -
>>>> add: unixUserPassword
>>>> unixUserPassword: ABCD!efgh12345$67890
>>>>
>>>> The above ldif is exactly the way that ADUC does it 
>>>> (ABCD!efgh12345$67890 is the unixUserPassword that ADUC gives every 
>>>> unix user), but you only really need the uidNumber & gidNumber. the 
>>>> uidNumber needs to be a unique number and the gidNumber will be the 
>>>> users primary Unix group (usually Domain Users) so that number 
>>>> needs to be what ever you gave to your main Unix group i.e. Domain 
>>>> Users needs to have the gidNumber '10000'
>>>>
>>>> You would add the above ldif like this:
>>>>
>>>> root at dc1:~# kinit
>>>> Password for administrator at EXAMPLE.COM:
>>>> root at dc1:~# ldbmodify --url=ldap://dc1.example.com --kerberos=yes 
>>>> --krb5-ccache=/tmp/krb5cc_0" /path_to/ldif
>>>>
>>>> Replacing 'dc1.example.com' with your S4 AD DC FQDN and 
>>>> '/path_to/ldif' with the full path and name of your ldif, and of 
>>>> course you need to run all of this on the S4 AD DC.
>>>>
>>>> the uidNumber and gidNumber ranges can be identical, in fact this 
>>>> is the way that ADUC works, but whatever range you do use, must be 
>>>> reflected in smb.conf
>>>> i.e. 'idmap config EXAMPLE : range = 10000-999999'.
>>>>
>>>> Just why you renamed the Administrator account, before you got 
>>>> everything working, escapes me, in fact most people probably never 
>>>> bother, so I would suggest that you rename the account back again, 
>>>> at least until you get everything working correctly.
>>>>
>>>> Do not give the Administrator account a uidNumber or gidNumber, 
>>>> create a new user and give this new user the required RFC2307 
>>>> attributes.
>>>>
>>>> Once you have added the gidNumber to Domain Users and added the 
>>>> ldif to John Doe, running (on a client joined to the domain) 
>>>> 'getent passwd' should show a line for John Doe and 'getent group 
>>>> Domain\ Users' should show the info for Domain Users.
>>>>
>>>> This will be my last post on this thread.
>>>>
>>>> Rowland
>>>
>>
>



More information about the samba mailing list