[Samba] Error0x00000006 with Point'n'Print Client Drivers

[Matthias Jänichen]

Hi,
I found this in the archives and suffer from the very same problem. Has
there been any progress?

My setup:
Ubuntu 12.04,
Cups ,
Samba 3.6.3 (no AD, Guest allowed , Printserver only)
Kyocera printer Driver 6.1.1.1118

BTW: upload for x64 drivers only works, if you specify below in smb.conf
[global]
   spoolss: architecture = Windows x64

I'd love to exchange thoughts on phone....

Regards
Matthias

> Hello Fabian,
>
> Am 01.04.2014 23:32, schrieb Fabian Hoffmann:
> >/ so I tried this again with samba version 4.1.6. Same result.
> /
> I tried to reproduce it with the KX_5.3.1025a5_signed driver in my test 
> environment. But all seems to be a kind of strange:
>
> I could not upload the driver from a Win7 x64 machine (Windows said, 
> it's not a 64-bit Driver). Uploading the x64 driver from a XP 32-Bit 
> machine worked (I though this isn't possible at all). But the driver is 
> shown on Win7 as x64, too. I could assign it to the printer (on first 
> assignment you will hit 
> https://bugzilla.samba.org/show_bug.cgi?id=10482, but don't worry about 
> that). Then I tried printing and got the same error than you. I 
> increased the loglevel to 10 and restarted Samba. After that, when I 
> open the properties of the printer, Windows tells me, that the Driver 
> "Kyocera FS-...." is not installed (but it's still shown in the drivers 
> tab). Seems something strange with this driver. I tried a Samsung, HP 
> and Sharp driver, but these all worked like expected.
>
> Maybe you can try an older version. I had a issue in the past with some 
> HP drivers. But older version didn't hit that bug.
>
> Can you file a bug report with your smb.conf, level 10 debug log, exact 
> driver information, etc.
>
>
> Regards,
> Marc

--