[Samba] Can't connect to my NAS after samba 4 update

[Richard llom]

Ricky Nance wrote:
> Just a side note, but 73 ms ping inside your lan isn't good... that to me
> would indicate a problem with a nic/nic driver/switch/ or cable. It may be
> a different issue, but I'd definitely check out that... how does your ping
> to other devices in your network look? Do all of them ping that high to
> your NAS? Most if not all LAN's I have dealt with are less than a 3 ms
> ping from edge to edge.
> 
> ping raspberrypi
> 
> Pinging raspberrypi [192.168.1.100] with 32 bytes of data:
> Reply from 192.168.1.100: bytes=32 time<1ms TTL=64
> 
Thanks for your concern, but I think this was just coincidentally:

[richard at chakra ~]$ ping linkstation
PING linkstation.Linksys_domain (192.168.22.2) 56(84) bytes of data.
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=1 ttl=64 
time=15.8 ms
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=2 ttl=64 
time=2.29 ms
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=3 ttl=64 
time=1.39 ms
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=4 ttl=64 
time=1.35 ms
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=5 ttl=64 
time=1.25 ms
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=6 ttl=64 
time=1.82 ms
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=7 ttl=64 
time=1.41 ms
64 bytes from LINKSTATION.Linksys_domain (192.168.22.2): icmp_seq=8 ttl=64 
time=1.41 ms
^C
--- linkstation.Linksys_domain ping statistics ---
8 packets transmitted, 8 received, 0% packet loss, time 7012ms
rtt min/avg/max/mdev = 1.256/3.354/15.890/4.749 ms

richard


PS:
Pls don't send copies to email, I'm reading this group via gmane.