[Samba] samba winbind is not showing full list

[****@ppu]

Hi all,

i came to know the difference between DL and Security group . previously i
was searching for a DL with wbonfo -g .:) wbinfo -g is showing corrrect
results .

now i am having the only problem that samba is not accessible with hostname
and it works with IP address.. i have added following lines in smb.conf with
no luck:(

        wins server = <wins ip addy>
        remote announce = <wins ip addy>/<netbios workgroup name>
        remore browse sync = <wins ip addy>



Follwing is the log when i access with hostname.

[2010/06/29 17:42:28.120075,  3] smbd/oplock.c:894(init_oplocks)
  init_oplocks: initializing messages.
[2010/06/29 17:42:28.120931,  3]
smbd/oplock_linux.c:224(linux_init_kernel_oplocks)
  Linux kernel oplocks enabled
[2010/06/29 17:42:28.121240,  3] smbd/process.c:1485(process_smb)
  Transaction 0 of length 137 (0 toread)
[2010/06/29 17:42:28.121287,  3] smbd/process.c:1294(switch_message)
  switch message SMBnegprot (pid 5003) conn 0x0
[2010/06/29 17:42:28.121327,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2010/06/29 17:42:28.121692,  3] smbd/negprot.c:586(reply_negprot)
  Requested protocol [PC NETWORK PROGRAM 1.0]
[2010/06/29 17:42:28.121723,  3] smbd/negprot.c:586(reply_negprot)
  Requested protocol [LANMAN1.0]
[2010/06/29 17:42:28.121742,  3] smbd/negprot.c:586(reply_negprot)
  Requested protocol [Windows for Workgroups 3.1a]
[2010/06/29 17:42:28.121759,  3] smbd/negprot.c:586(reply_negprot)
  Requested protocol [LM1.2X002]
[2010/06/29 17:42:28.121776,  3] smbd/negprot.c:586(reply_negprot)
  Requested protocol [LANMAN2.1]
[2010/06/29 17:42:28.121793,  3] smbd/negprot.c:586(reply_negprot)
  Requested protocol [NT LM 0.12]
[2010/06/29 17:42:28.122652,  3] smbd/negprot.c:404(reply_nt1)
  using SPNEGO
[2010/06/29 17:42:28.122682,  3] smbd/negprot.c:691(reply_negprot)
  Selected protocol NT LM 0.12
[2010/06/29 17:42:28.127754,  3] smbd/process.c:1485(process_smb)
  Transaction 1 of length 2976 (0 toread)
[2010/06/29 17:42:28.127845,  3] smbd/process.c:1294(switch_message)
  switch message SMBsesssetupX (pid 5003) conn 0x0
[2010/06/29 17:42:28.127867,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2010/06/29 17:42:28.127933,  3]
smbd/sesssetup.c:1435(reply_sesssetup_and_X)
  wct=12 flg2=0xc807
[2010/06/29 17:42:28.128076,  3]
smbd/sesssetup.c:1189(reply_sesssetup_and_X_spnego)
  Doing spnego session setup
[2010/06/29 17:42:28.128106,  3]
smbd/sesssetup.c:1231(reply_sesssetup_and_X_spnego)
  NativeOS=[Windows Server 2003 3790 Service Pack 2] NativeLanMan=[]
PrimaryDomain=[Windows Server 2003 5.2]
[2010/06/29 17:42:28.128224,  3]
smbd/sesssetup.c:805(reply_spnego_negotiate)
  reply_spnego_negotiate: Got secblob of size 2714
[2010/06/29 17:42:28.131398,  3]
libads/kerberos_verify.c:378(ads_secrets_verify_ticket)
  ads_secrets_verify_ticket: enc type [23] failed to decrypt with error
Decrypt integrity check failed
[2010/06/29 17:42:28.131704,  3]
libads/kerberos_verify.c:568(ads_verify_ticket)
  ads_verify_ticket: krb5_rd_req with auth failed (Bad encryption type)
[2010/06/29 17:42:28.131805,  1] smbd/sesssetup.c:332(reply_spnego_kerberos)
  Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE!
[2010/06/29 17:42:28.131946,  3] smbd/error.c:80(error_packet_set)
  error packet at smbd/sesssetup.c(334) cmd=115 (SMBsesssetupX)
NT_STATUS_LOGON_FAILURE
[2010/06/29 17:42:28.146821,  3] smbd/sec_ctx.c:310(set_sec_ctx)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2010/06/29 17:42:28.146926,  3] smbd/connection.c:31(yield_connection)
  Yielding connection to
[2010/06/29 17:42:28.147258,  3] smbd/server.c:902(exit_server_common)
  Server exit (failed to receive smb request)





>>>
>>>
>>
>>
>