[Samba] Unable to join samba server to a NT4 style domain
Van Sickler, Jim
vansickj-eodc at kaman.com
Thu Apr 14 21:42:24 GMT 2005
Ash,
net help rpc shows the following for the --long option:
-l or --long Display full information
In what I've found from googling and
the Samba-Guide (thanks, John!),
it looks like net rpc join will create the
Domain machine account when you run it; if
MYSERVER already exists, you'll be prevented
from creating a duplicate entry.
Try deleting MYSERVER from the Domain.
then run your original command...
./net rpc join -U administrator%'xxxxxxxx'
or ./net rpc join -S NT4SERVER -U administrator%'xxxxxxxx'
and see what happens.
If this works, it reinforces this comment from my earlier link:
This process joins the server to the domain
without having to create the machine trust
account on the PDC beforehand.
and is a change from Samba 2.x, which required
the creation of the machine trust account
on the PDC before running "smbpasswd -j DOM -r DOMPDC".
John: if this is true, can Chap 7 be amended to
reflect the change?
Jim
> -----Original Message-----
> From: Ashutosh Kamdar [mailto:akamdar at gnsi.com]
> Sent: Thursday, April 14, 2005 2:25 PM
> To: Van Sickler, Jim; 'Ashutosh Kamdar'; samba at lists.samba.org
> Subject: Re: [Samba] Unable to join samba server to a NT4 style domain
>
>
> Jim,
>
> I have Samba shut down while executing the net rpc join
> commands, as the HOW-TO says.
>
> On trying the following,
>
> # ./net rpc join -S NTSERVER
> Password:
>
> This is the response I get,
>
> Could not connect to server NTSERVER
> The username or password was not correct.
>
> The password used was that of the administrator authorized to
> add machines to the domain. Is there any other
> username/password I should be using?
>
> On trying this,
>
> net join -S NT4SERVER -U administrator%'xxxxxxxx' -W
> MYWORKGROUP --long
>
> This is the response I get,
>
> Unable to join domain <domain-name>.
>
> BTW, what does the switch --long do?
>
> I have followed the exact steps in the document you have
> pointed out and the HOW-TOs. Thanks for pointing that out
> this particular chapter.
>
> Regards,
>
> Ash
>
> ------Original Message-----
> -From: Van Sickler, Jim [mailto:vansickj-eodc at kaman.com]
> -Sent: Thursday, April 14, 2005 08:30 PM
> -To: ''Ashutosh Kamdar'', samba at lists.samba.org
> -Subject: RE: [Samba] Unable to join samba server to a NT4
> style domain
> -
> -Ash,
> -
> -Do you have Samba shut down while you're
> -running net rpc join? The daemons
> -shouldn't be running, AFAIK.
> -
> -Make sure they're down, and try your earlier
> -net rpc join commands...
> -
> -If that doesn't work, try just:
> - net rpc join -S NT4SERVER
> -
> -Maybe try deleting MYSERVER from the domain,
> -then
> -net join -S NT4SERVER -U administrator%'xxxxxxxx' -W
> MYWORKGROUP --long
> -
> -See
> -http://aosda.net/docs/samba/3.0/Samba-HOWTO-Collection/domain
> -member.html#id
> -2522086
> -
> -
> -Jim
> -
> -
> -> -----Original Message-----
> -> From: Ashutosh Kamdar [mailto:akamdar at gnsi.com]
> -> Sent: Thursday, April 14, 2005 12:50 PM
> -> To: Van Sickler, Jim; 'Ashutosh Kamdar'; samba at lists.samba.org
> -> Subject: Re: [Samba] Unable to join samba server to a NT4
> style domain
> ->
> ->
> -> Jim,
> ->
> -> Yes, the NTSERVER is a PDC. Do you know of a way to see any
> -> kind of logs on the net join rpc command?
> ->
> -> -Ash
> ->
> -> ------Original Message-----
> -> -From: Van Sickler, Jim [mailto:vansickj-eodc at kaman.com]
> -> -Sent: Thursday, April 14, 2005 07:40 PM
> -> -To: ''Ashutosh Kamdar'', samba at lists.samba.org
> -> -Subject: RE: [Samba] Unable to join samba server to a NT4
> -> style domain
> -> -
> -> -Ash,
> -> -
> -> -Is NT4SERVER the PDC?
> -> -If not, use -S PDC instead of -S NT4SERVER
> -> -
> -> -Jim
> -> -
> -> -> -----Original Message-----
> -> -> From: Ashutosh Kamdar [mailto:akamdar at gnsi.com]
> -> -> Sent: Thursday, April 14, 2005 12:24 PM
> -> -> To: Van Sickler, Jim; 'Ashutosh Kamdar'; samba at lists.samba.org
> -> -> Subject: Re: [Samba] Unable to join samba server to a NT4
> -> style domain
> -> ->
> -> ->
> -> -> Jim,
> -> ->
> -> -> For all of the four commands you have mentioned, I get the
> -> -> same response:
> -> ->
> -> -> Unable to join domain <domain-name>.
> -> ->
> -> -> There are no error messages or explanation with it, just the
> -> -> plain text.
> -> ->
> -> -> Regards,
> -> ->
> -> -> Ash
> -> ->
> -> -> ------Original Message-----
> -> -> -From: Van Sickler, Jim [mailto:vansickj-eodc at kaman.com]
> -> -> -Sent: Thursday, April 14, 2005 07:15 PM
> -> -> -To: ''Ashutosh Kamdar'', samba at lists.samba.org
> -> -> -Subject: RE: [Samba] Unable to join samba server to a NT4
> -> -> style domain
> -> -> -
> -> -> -Ash,
> -> -> -
> -> -> -try one of the following:
> -> -> -
> -> -> -./net rpc join -S NT4SERVER -U administrator
> -> -> -
> -> -> -./net rpc join -S NT4SERVER -U administrator%'xxxxxxxx'
> -> -> -
> -> -> -./net rpc join -W MYWORKGROUP -U administrator
> -> -> -
> -> -> -./net rpc join -W MYWORKGROUP -U administrator%'xxxxxxxx'
> -> -> -
> -> -> -Jim
> -> -> -
> -> -> -> -----Original Message-----
> -> -> -> From: Ashutosh Kamdar [mailto:akamdar at gnsi.com]
> -> -> -> Sent: Thursday, April 14, 2005 11:48 AM
> -> -> -> To: Van Sickler, Jim; samba at lists.samba.org
> -> -> -> Subject: Re: [Samba] Unable to join samba server to a NT4
> -> -> style domain
> -> -> ->
> -> -> ->
> -> -> -> Jim,
> -> -> ->
> -> -> -> -Try adding the Samba server to the NT4 Domain first.
> -> -> -> Response: The samba server has already been added to
> -> the NT domain.
> -> -> ->
> -> -> -> -Is the NT4 server also a WINS server?
> -> -> -> -If so, add that info to the smb.conf
> -> -> -> -
> -> -> -> -wins server = xxx.xxx.xxx.xxx
> -> -> -> -name resolve order = wins lmhosts host bcast
> -> -> -> -
> -> -> -> -Put the NT4 server info into /etc/lmhosts
> -> -> -> -and /etc/hosts
> -> -> -> -xxx.xxx.xxx.xxx NT4SERVER
> -> -> ->
> -> -> -> Response: The NT server is not functioning as a WINS server.
> -> -> -> The /etc/hosts and /etc/lmhosts already have the entry for
> -> -> -> the NT server. The server can also resolve the NTSERVER_NAME
> -> -> -> using DNS.
> -> -> ->
> -> -> -> I also used rpcclient to see if there any connection
> -> -> -> problems, and it was able to connect just fine to the
> -> -> -> NTSERVER. Thorougly confused.
> -> -> ->
> -> -> -> Any other ideas?
> -> -> ->
> -> -> -> Thanks for your response,
> -> -> ->
> -> -> -> Ash
> -> -> ->
> -> -> -> -
> -> -> -> -> -----Original Message-----
> -> -> -> -> From: Ashutosh Kamdar [mailto:akamdar at gnsi.com]
> -> -> -> -> Sent: Thursday, April 14, 2005 12:58 AM
> -> -> -> -> To: samba at lists.samba.org
> -> -> -> -> Subject: [Samba] Unable to join samba server to a NT4
> -> -> style domain
> -> -> -> ->
> -> -> -> ->
> -> -> -> -> Hello,
> -> -> -> ->
> -> -> -> -> I have installed Samba version 3.0.13 on a
> Solaris 9 machine
> -> -> -> -> and am trying to add it to an existing NT domain
> as a member
> -> -> -> -> server. I have followed the instructions in
> Chapter 2 of the
> -> -> -> -> Samba HOW-TO collection for adding a samba server as
> -> a Domain
> -> -> -> -> member. The problem is that when i use the net rpc join
> -> -> -> -> command to join the domain, I get the following error:
> -> -> -> ->
> -> -> -> -> # ./net rpc join -U administrator%'xxxxxxxx'
> -> -> -> ->
> -> -> -> -> Unable to find a suitable server
> -> -> -> ->
> -> -> -> -> Unable to find a suitable server
> -> -> -> ->
> -> -> -> -> Specifying the domain name with a -w switch or the
> -> PDC doesnt
> -> -> -> -> seem to help.
> -> -> -> ->
> -> -> -> -> Is there a way for me to see a detailed version
> of the error
> -> -> -> -> message or some log file where this is dumped to? I am
> -> -> -> -> posting the smb.conf for reference. Please help
> me resolve
> -> -> -> -> this error.
> -> -> -> ->
> -> -> -> -> Thanks,
> -> -> -> ->
> -> -> -> -> Ash
> -> -> -> ->
> -> -> -> ->
> -> -> ->
> -> ->
> ->
> ----------------------------------8<----------------------------------
> -> -> -> -> smb.conf
> -> -> -> ->
> -> -> -> -> [global]
> -> -> -> -> dns proxy = no
> -> -> -> -> debug timestamp = yes
> -> -> -> -> encrypt passwords = yes
> -> -> -> -> idmap gid = 15000-20000
> -> -> -> -> socket options = TCP_NODELAY
> -> -> -> -> max log size = 1024
> -> -> -> -> password server = *
> -> -> -> -> idmap uid = 15000-20000
> -> -> -> -> debug level = 3
> -> -> -> -> security = domain
> -> -> -> -> server string = Samba Server
> -> -> -> -> workgroup = MYWORKGROUP
> -> -> -> -> log level = 3
> -> -> -> -> log file = /usr/local/samba/var/log.%m
> -> -> -> -> netbios name = MYSERVER
> -> -> -> -> load printers = yes
> -> -> -> -> os level = 33
> -> -> -> -> default = share
> -> -> -> -> [homes]
> -> -> -> -> comment = Home Directories
> -> -> -> -> valid users = %S
> -> -> -> -> browseable = no
> -> -> -> -> writable = yes
> -> -> -> ->
> -> -> -> -> [printers]
> -> -> -> -> comment = All Printers
> -> -> -> -> path = /usr/spool/samba
> -> -> -> -> browseable = no
> -> -> -> -> guest ok = no
> -> -> -> -> writable = no
> -> -> -> -> printable = yes
> -> -> -> ->
> -> -> -> -> [share]
> -> -> -> -> path = /share
> -> -> -> -> comment = Solaris share
> -> -> -> -> valid users = @Accounts
> -> -> -> -> guest ok = Yes
> -> -> -> -> read only = No
> -> -> -> ->
> -> -> -> ->
> -> -> ->
> -> ->
> ->
> ----------------------------------8<----------------------------------
> -> -> -> ->
> -> -> -> ->
> -> -> -> ->
> -> -> -> -> --
> -> -> -> -> To unsubscribe from this list go to the following URL
> -> -> and read the
> -> -> -> -> instructions:
https://lists.samba.org/mailman/listinfo/samba
-> -> -> ->
-> -> -> -
-> -> ->
-> -> ->
-> -> -
-> ->
-> ->
-> -
->
->
-
More information about the samba
mailing list