[Fwd: [Samba] second printer connection]

[Gregory W. Eckrich]

-------- Original Message --------
Subject: 	[Samba] second printer connection
Date: 	Thu, 04 Mar 2004 14:17:44 -0600
From: 	Gregory W. Eckrich <newxman at outdrs.net>
To: 	samba <samba at lists.samba.org>



PROBLEM:  unable to print to the 2nd of two printers on a samba host.
ENVIRONMENT:
-4 systems in a home network; connected to an HP Pro Curve hub (10 meg)
-3 systems run Red Hat linux 9.0 (system names:  snoopy, white, blue)
-4th system runs Windows 2000 Professional (system name:  red)
-SAMBA server Snoopy has two directly attached printers, an HP 4L on 
LPT1 and an HP OfficeJet T45 on LPT2
      Snoopy:  384 MEG RAM; celeron 400 Mhz
      SAMBA:  ver 2.2.7a
-On red: (Win2K) if a print job is sent to the HP_4L, it prints cleanly; 
if a print job is sent to the T45, it does not print
      Red:  COMPAQ Deskpro 64 MEG RAM; Pentium 200 Mhz
-On red: if one clicks start, run and types " \\snoopy", all of the 
shares on snoopy are seen, including the two printers
       [Win2K troubleshooting says that this demonstrates a "basic" 
connection]
-On red:  either printer, upon being opened, reports in the title 
window:   "[printer] on snoopy, Access denied unable to connect"

CONDITIONS on Snoopy:
-Both printers print correctly; various softwares see both printers
-/etc/smb.conf


Thanks,
Greg.  Eckrich

-- 
To unsubscribe from this list go to the following URL and read the
instructions:  http://lists.samba.org/mailman/listinfo/samba