AW: [Samba] wbinfo error

[Altrock, Jens]

Anyway the error is still there :( same as before

But I see... I didn't make a default setup though... for there are too many
components I 
don't need. Anyway are there any more packages that samba needs? :)

-----Ursprüngliche Nachricht-----
Von: rruegner [mailto:robowarp at gmx.de]
Gesendet: Dienstag, 4. November 2003 11:36
An: Altrock, Jens; samba at lists.samba.org
Betreff: Re: [Samba] wbinfo error


it seems to me that you dont have installed the needed packs
glibc-locale check it via yast if it is installed.
this sometimes happened if you dont make a default setup with suse ( which i
would not recommend for a server )
----- Original Message ----- 
From: "Altrock, Jens" <Jens.Altrock at STADT-NW.DE>
To: "'rruegner'" <robowarp at gmx.de>; <samba at lists.samba.org>
Sent: Tuesday, November 04, 2003 11:32 AM
Subject: AW: [Samba] wbinfo error


Ok did it, but
if i use testparm I get the following errors:

Module '/usr/local/samba/lib/samba/charset/CP850.so' loaded
Conversion from UCS-2LE to ISO8859-1 not supported
Conversion from ISO8859-1 to UCS-2LE not supported
Conversion from ISO8859-1 to ASCII not supported
Conversion from ISO8859-1 to CP850 not supported
Conversion from ISO8859-1 to UTF8 not supported
Conversion from ASCII to ISO8859-1 not supported
Conversion from CP850 to ISO8859-1 not supported
Conversion from UTF8 to ISO8859-1 not supported
Conversion from UCS-2LE to ISO8859-1 not supported
Conversion from UCS-2LE to ISO8859-1 not supported
Conversion from ISO8859-1 to UCS-2LE not supported
Conversion from ISO8859-1 to CP850 not supported
Conversion from ISO8859-1 to UTF8 not supported
Conversion from ISO8859-1 to UCS-2LE not supported
Conversion from ISO8859-1 to CP850 not supported
Conversion from ISO8859-1 to UTF8 not supported
Conversion from CP850 to ISO8859-1 not supported
Conversion from CP850 to ISO8859-1 not supported
Conversion from UTF8 to ISO8859-1 not supported
Conversion from UTF8 to ISO8859-1 not supported
convert_string_allocate: Conversion not supported.
Processing section "[tmp]"
Conversion from UCS-2LE to ISO8859-1 not supported
Conversion from UCS-2LE to ISO8859-1 not supported
Conversion from ISO8859-1 to UCS-2LE not supported
Conversion from ISO8859-1 to CP850 not supported
Conversion from ISO8859-1 to UTF8 not supported
Conversion from ISO8859-1 to UCS-2LE not supported
Conversion from ISO8859-1 to CP850 not supported
Conversion from ISO8859-1 to UTF8 not supported
Conversion from CP850 to ISO8859-1 not supported
Conversion from CP850 to ISO8859-1 not supported
Conversion from UTF8 to ISO8859-1 not supported
Conversion from UTF8 to ISO8859-1 not supported
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
ERROR: the 'winbind separator' parameter must be a single character.
Server role: ROLE_DOMAIN_MEMBER
Press enter to see a dump of your service definitions
# Global parameters
[global]
unix charset = ISO8859-1
display charset = ISO8859-1
workgroup = xxx
server string = Squid Proxy
security = DOMAIN
password server = xxx
ldap ssl = no
idmap uid = 10000-20000
idmap gid = 10000-20000
template shell = /bin/bash
winbind separator = "\"

[tmp]
comment = Temporary Files
path = /tmp


So he kicks out the dos charset line.
and wbinfo has the same error as before....


-----Ursprüngliche Nachricht-----
Von: rruegner [mailto:robowarp at gmx.de]
Gesendet: Dienstag, 4. November 2003 10:56
An: Altrock, Jens; samba at lists.samba.org
Betreff: Re: [Samba] wbinfo error


put it in the global section
of smb.conf
----- Original Message ----- 
From: "Altrock, Jens" <Jens.Altrock at STADT-NW.DE>
To: "'rruegner'" <robowarp at gmx.de>; <samba at lists.samba.org>
Sent: Tuesday, November 04, 2003 7:19 AM
Subject: AW: [Samba] wbinfo error


Hi,

SuSE settings are set to german though.
But where to add these rows?

-----Ursprüngliche Nachricht-----
Von: rruegner [mailto:robowarp at gmx.de]
Gesendet: Montag, 3. November 2003 17:34
An: Altrock, Jens; samba at lists.samba.org
Betreff: Re: [Samba] wbinfo error


Hi, to get to german umlauts and away from this failure message

add this and setup root use lang in suse

displaycharset = ISO8859-1

unixcharset = ISO8859-1

doscharset = CP850

riginal Message ----- 
From: "Altrock, Jens" <Jens.Altrock at STADT-NW.DE>
To: <samba at lists.samba.org>
Sent: Monday, November 03, 2003 3:12 PM
Subject: [Samba] wbinfo error


> Hi!
>
> I set up Samba 3.0.0 on SuSE 8.2 Professional, and got it joining our NT4
> domain with success. Although I got a little problem: when using wbinfo -u
I
> get the following error:
> wbinfo: relocation error: /usr/local/samba/lib/samba/charset/cp850.so:
> undifined symbol: smb_register_charset
>
> Can anyone help me with that?
>
> Regards,
>
> Jens
> ###########################################
> Diese Nachricht wurde von F-Secure Anti-Virus gescannt.
>
> This message has been scanned by F-Secure Anti-Virus.
>
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba
>
###########################################
Diese Nachricht wurde von F-Secure Anti-Virus gescannt.

This message has been scanned by F-Secure Anti-Virus.

###########################################
Diese Nachricht wurde von F-Secure Anti-Virus gescannt.

This message has been scanned by F-Secure Anti-Virus.

###########################################
Diese Nachricht wurde von F-Secure Anti-Virus gescannt.

This message has been scanned by F-Secure Anti-Virus.