[Samba] smaba 3.0 - domain groups : OS info

[Kristyan Osborne]

I dont think its a OS problem, Im using suse 8.1.
 
If you log into the windows box as root you can see the groups and the users in the groups. Any other user including domain admins can not. This would indicate that there is a problem with samba, either with ACLs accessing group information or passing group/user information from the system to a smbd process owned by a user other than root.
 
Still no closer to an answer
 
Cheers
-------------
Kristyan Osborne - IT Technician
Longhill High School
01273 391672

	-----Original Message----- 
	From: Ken Innes [mailto:kinnes at ekos.com] 
	Sent: Tue 04/03/2003 18:20 
	To: Lukasz Tomaszewski; Kristyan Osborne; Samba Users 
	Cc: 
	Subject: RE: [Samba] smaba 3.0 - domain groups : OS info
	
	

	I'm using Red Hat 7.3 on both the Samba 2.2.7 and 3.0 installations
	
	-Ken
	
	> -----Original Message-----
	> From: Łukasz Tomaszewski [mailto:uki at telkab.pl]
	> Sent: Tuesday, March 04, 2003 11:57 AM
	> To: Ken Innes; Kristyan Osborne; Samba Users
	> Subject: Re: [Samba] smaba 3.0 - domain groups
	>
	>
	> i use 'truss' to trace the system calls (nmbd proccess) after 'wbinfo -g'
	> request. it returns
	>
	> ioctl(14,SIOCGIFFLAGS,0xbfbfcdc0)   = 0 (0x0)
	> ioctl(14,SIOCGIFNETMASK,0xbfbfcdc0)   = 0 (0x0)
	> ioctl(14,SIOCGIFADDR,0xbfbfcde0)   ERR#49 'Can't assign requested address'
	> ioctl(14,SIOCGIFADDR,0xbfbfce28)   ERR#49 'Can't assign requested address'
	> ioctl(14,SIOCGIFADDR,0xbfbfce70)   ERR#49 'Can't assign requested address'
	> close(14)      = 0 (0x0)
	> gettimeofday(0xbfbff838,0x0)    = 0 (0x0)
	> sigprocmask(0x2,0xbfbff760,0x0)    = 0 (0x0)
	>
	> i'm going to check samba logs after 'debug level' change (higher
	> than 2) in
	> smb.conf .
	>
	> anyway. i was thinking that maybe its OS problem. i use FreeBSD 4.7.
	>
	> regards
	> Uki
	>
	> ----- Original Message -----
	> From: "Ken Innes" <kinnes at ekos.com>
	> To: "Kristyan Osborne" <kris at longhill.brighton-hove.sch.uk>; "Lukasz
	> Tomaszewski" <uki at telkab.pl>; "Samba Users" <samba at lists.samba.org>
	> Sent: Monday, March 03, 2003 6:07 PM
	> Subject: RE: [Samba] smaba 3.0 - domain groups
	>
	>
	> > I have this problem too with Samba 3.0. I've tried security = domain and
	> > security = server
	> > (using an NT PDC) and still get the 'Error looking up domain groups.'
	> error.
	> > My 2.2.7a Samba server does provide the groups. Anyone have any ideas
	> about
	> > this? Its
	> > clearly not an entirely isolated problem!
	> >
	> > -Ken
	> >
	> > _________________________________________
	> >
	> > Ken Innes
	> > Chief Information Officer
	> > EKOS Research Associates Inc.
	> > 99 Metcalfe St., Suite 1100
	> > Ottawa, Ontario
	> > K1P 6L7
	> >
	> > www.ekos.com
	> >
	> > > -----Original Message-----
	> > > From: samba-bounces+kinnes=ekos.com at lists.samba.org
	> > > [mailto:samba-bounces+kinnes=ekos.com at lists.samba.org]On Behalf
	> > > Of Kristyan Osborne
	> > > Sent: Monday, March 03, 2003 10:42 AM
	> > > To: Lukasz Tomaszewski; Samba Users
	> > > Subject: RE: [Samba] smaba 3.0 - domain groups
	> > >
	> > >
	> > > Hi,
	> > >
	> > > I've had exactly the same problem since august 2002, after
	> > > several emails it was not resolved so i gave up and i thought i
	> > > would leave it until someone else (like u) had the same problem.
	> > > Maybe then it might be answered
	> > >
	> > > -------------
	> > > Kristyan Osborne IT Technician
	> > > Longhill High School
	> > > 01273 391672
	> > >
	> > > -----Original Message-----
	> > > From: Lukasz Tomaszewski [mailto:uki at telkab.pl]
	> > > Sent: 02 March 2003 19:17
	> > > To: Samba Users
	> > > Subject: [Samba] smaba 3.0 - domain groups
	> > >
	> > >
	> > > few day ago, i've asked about mapping unix-windows groups under samba
	> > > 2.2.7a.
	> > >
	> > > now, i know that it is impossible. so i've changed samba on my PDC to
	> 3.0
	> > > version (smbgroupedit).
	> > >
	> > > but still i've got problems with groups.
	> > >
	> > > before - from another machine when i've used 'wbinfo -g'i've got
	> response
	> > > from my PDC:
	> > > Domain Admins
	> > > Domain Users
	> > >
	> > > after change to samaba 3.0 with the same config file 'wbinfo -g'
	> returns:
	> > > Error looking up domain groups.
	> > >
	> > > any suggestions?
	> > >
	> > > regards
	> > > Uki
	> > >
	> > > --
	> > > To unsubscribe from this list go to the following URL and read the
	> > > instructions:  http://lists.samba.org/mailman/listinfo/samba
	> > > --
	> > > To unsubscribe from this list go to the following URL and read the
	> > > instructions:  http://lists.samba.org/mailman/listinfo/samba
	> > >
	> >
	> >
	>
	>