[Samba] Using Winbind with Squid

[Jay Turner]

You need to use the wb_group squid external_acl helper.

Check the Squid FAQ and Squid message archives for details.

Jay

> -----Original Message-----
> From: samba-bounces+jturner=bsis.com.au at lists.samba.org
> [mailto:samba-bounces+jturner=bsis.com.au at lists.samba.org]On Behalf Of
> Ian Clancy
> Sent: Wednesday, 30 July 2003 8:19 PM
> To: 'samba at lists.samba.org'
> Subject: [Samba] Using Winbind with Squid
>
>
> Hello,
> I've configured a squid proxy server to use the wb_auth module to
> authenticate NT Users . I'm aware that this is not the squid users mailing
> list but since the wb_auth modle uses the winbind application i
> thought this
> might be a good place to look for some help.
> Basically, the wb_auth module asks winbind to authenticate a
> users. Winbind
> then returns a '0' if the authentication was successful, or a '1' if the
> authentication was unsuccessful. This is working perfectly except for one
> problem. I want to be able to authenticate only specified users or groups.
> At the moment every domain user is able to use the proxy server.
> Can anyone
> think of a way to get winbind to only authenticate members of an 'Internet
> Users' group ?.
>
> Has anyone any previous experience of the setup ?
> All help much appreciated.
> Ian
>
>
> Legal Disclaimer: Any views expressed by the sender of this message are
> not necessarily those of Connaught Electronics Ltd. Information in this
> e-mail may be confidential and is for the use of the intended recipient
> only, no mistake in transmission is intended to waive or compromise such
> privilege. Please advise the sender if you receive this e-mail by mistake.
>
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba
>
>