[Samba] problems builing mandrake rpm from 3.0 alpha15
Buchan Milne
bgmilne at cae.co.za
Thu Feb 28 03:19:03 GMT 2002
You might be better off using a Mandrake srpm or spec file.
Unfortunately I have not had time to build 3alpha15, but you can find an
SRPM here:
http://ranger.dnsalias.com/mandrake/samba/SRPMS/samba-3.0alpha14-0.1mdk.src.rpm
or a spec file here:
http://ranger.dnsalias.com/mandrake/samba/SRPMS/samba-3.0alpha14-0.1mdk.spec
You should then untar samba-3.0-alpha15 and rename it's directory to
samba-3.0alpha15, then tar it up as samba-3.0alpha14.tar.bz2, copy it to
your rpm/SOUCES directory. Copy the spec file as
samba-3.0alpha15-0.0mdk.spec and change the %define ver 3.0alpha14 in
the spec file to %define ver 3.0alpha15 (this is all to keep rpm happy
that there is no "-" in the version number) and then do:
rpm -ba --with mdk81 samba-3.0alpha15-0.0mdk.spec
If you want winbind, ads or ldap support, you can add the following
optoins to the rpm command (respectively):
- --with winbind --with ads --with ldap
There are still some things I need to get synced from samba-2.2.3a-6mdk,
but you should get working rpms with the files in the same locations,
and you won't have to use --force when installing them.
If you wait long enough I can get 3alpha15 compiled, so look in
http://ranger.dnsalias.com/mandrake/samba/RPMS/8.1/3.0-alpha/ for RPMs.
Regards,
Buchan
| Message: 8
| From: Luk Vermeylen <luk at vermeylen.org>
| To: samba at lists.samba.org
| Date: 27 Feb 2002 22:39:48 +0100
| Subject: [Samba] problems builing mandrake rpm from 3.0 alpha15
|
| building rpm for mandrake 8.1 gives me this error
| what should i try?
|
| checking for two-argument statfs with struct fs_data (Ultrix)... no
| checking if large file support can be enabled... yes
| checking whether to support ACLs... no
| checking whether to build winbind... yes
| checking for poptGetContext in -lpopt... no
| checking whether to use included popt... ./popt
| checking configure summary
| configure: error: summary failure. Aborting config
| error: Bad exit status from /var/tmp/rpm-tmp.99650 (%build)
|
|
| RPM build errors:
| Bad exit status from /var/tmp/rpm-tmp.99650 (%build)
| [root at www Mandrake]#
|
| in the log file is this:
|
|
| #!/bin/sh
|
| RPM_SOURCE_DIR="/usr/src/RPM/SOURCES"
| RPM_BUILD_DIR="/usr/src/RPM/BUILD"
| RPM_OPT_FLAGS="-O2 -march=i686"
| RPM_ARCH="i386"
| RPM_OS="linux"
| export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS
| RPM_DOC_DIR="/usr/share/doc"
| export RPM_DOC_DIR
| RPM_PACKAGE_NAME="samba"
| RPM_PACKAGE_VERSION="PVERSION"
| RPM_PACKAGE_RELEASE="PRELEASE"
| export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE
| RPM_BUILD_ROOT="/var/tmp/samba"
| export RPM_BUILD_ROOT
|
| set -x
| umask 022
| cd /usr/src/RPM/BUILD
| cd samba-PVERSION
| cd source
|
|
| NUMCPU=`grep processor /proc/cpuinfo | wc -l`
|
| CFLAGS="$RPM_OPT_FLAGS $EXTRA" ./configure \
| --prefix=/usr \
| --with-fhs \
| --libdir=/etc/samba \
| --localstatedir=/var \
| --with-codepagedir=/usr/share/samba/codepages \
| --with-configdir=/etc/samba \
| --with-lockdir=/var/lock/samba \
| --with-swatdir=/usr/share/swat \
| --with-quotas \
| --with-smbmount \
| --with-pam \
| --with-pam_smbpass \
| --with-syslog \
| --with-utmp \
| --with-netatalk \
| --with-sambabook=/usr/share/swat/using_samba
|
| make -j${NUMCPU} proto
| make -j${NUMCPU} all smbfilter nsswitch/libnss_wins.so debug2html
|
| exit 0
|
| -- Luk Vermeylen Putsebaan 84 2040 Antwerpen 4 +32(0)32950012 Linux
Counter: 186539
|
- --
|----------------Registered Linux User #182071-----------------|
Buchan Milne Mechanical Engineer, Network Manager
Cellphone * Work +27 82 472 2231 * +27 21 8828820x202
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key http://ranger.dnsalias.com/gpg.key
More information about the samba
mailing list