No "seteuid" method available

[MCCALL,DON (HP-USA,ex1)]

The main issue is actually that you MUST use the HP ANSI c compiler or gcc,
NOT the c complier that comes bundled
free with HP-UX - the bundled compiler is NOT ansi c compatible....
Hope this helps,
Don

-----Original Message-----
From: Tom.Williams at diversifiedsoftware.com
[mailto:Tom.Williams at diversifiedsoftware.com]
Sent: Thursday, December 13, 2001 6:15 PM
To: ivan at isa.cult.cu
Cc: gary_zawilinski at gdt1.com; samba at lists.samba.org;
samba-admin at lists.samba.org
Subject: Re: No "seteuid" method available



Hi!  I was encountering this SAME problem and I think I have a clue as to
how to fix it (on HP-UX 11.00 at least).  I found this in the "README.hpux"
file from the HP-UX 11.00 binary bundle I downloaded from the Samba site: 

$ more README.hpux 
This file (samba-2.2.2-hppa1.1-hp-hpux11.00.tar.gz) contains Samba 2.2.2 
compiled for HP-UX 11.x using the HP ANSI C compiler. It must be extracted 
into /opt/ which will create the directory /opt/samba/ and place everything 
there.  To extract: 

  # cd /opt 
  # gzcat samba-2.2.2-hppa1.1-hp-hpux11.00.tar.gz | tar xf - 
  
Samba was compiled with the following options: 

  CC=cc \ 
  CFLAGS="+O2 -Ae +ESlit +Onofltacc +DAportable +Oentrysched +Odataprefetch"
\ 
    ./configure --prefix=/opt/samba --with-automount \ 
                --localstatedir /var/opt/samba \ 
                --with-lockdir=/var/opt/samba/locks \ 
                --with-privatedir=/etc/opt/samba/private \ 
                --with-sambabook=/opt/samba/doc/using-samba 

Samba is covered under the GNU Copyleft (GPL), available at 
http://www.gnu.org/copyleft/gpl.html. Source to Samba 2.2.2 is available 
from http://www.samba.org/. 

- 11/05/01 
$ 

I'm going to try using these compiler options to see if I can get it to
compile myself. 

I hope this helps. 

Peace..... 

Tom




  _____  

 <http://www.dvdprofiler.com/mycollection.asp?alias=tomdkat> My DVD
Collection 



	Iván N Paz <ivan at isa.cult.cu> 
Sent by: samba-admin at lists.samba.org 


12/13/01 11:41 AM 


        
        To:        "Gary Zawilinski" <gary_zawilinski at gdt1.com>,
<samba at lists.samba.org> 
        cc:         
        Subject:        Re: No "seteuid" method available



Hi Gary,

I had the SAME problem when I first tried to compile samba 2.2.2 I had
Slackware 8 at home and could not compile due to this.... :(

Then at school where I kinda manage a small network installed Slackware 8
again and tried to compile Samba again, only that this time it DID worked!!!

Honestly I dont know where the diference was... only that at my place I was
running Kernel 2.4.5 (plain vanilla kernel that comes with the distro) and
at school
I was running the same distro but with Kernel 2.2.19...

Any more ideas about this???? I´m truely concerned abou this problem too...

Ivan

----- Original Message -----
From: "Gary Zawilinski" <gary_zawilinski at gdt1.com>
To: <samba at lists.samba.org>
Sent: Saturday, December 08, 2001 4:23 PM
Subject: No "seteuid" method available


> Hey Everyone:
>
> "No seteuid method available" is the error I get when trying to configure
Samba 2.2.2 on an HP-UX 11.0 system. This system is part
of a test network and has tcp/ip but no DNS. There are only 3 articles on
the Samba site about this and the only fix requires
changing and recompiling "C" libraries. Is there another, simpler fix?
Thanks.
>
>
> ~ Gary Zawilinski ~
> Information Technology
>
>
>
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
>
> This message has been scanned for viruses.
> **********************************************************************
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba
>
>


-- 
To unsubscribe from this list go to the following URL and read the
instructions:  http://lists.samba.org/mailman/listinfo/samba




-------------- next part --------------
HTML attachment scrubbed and removed