No "seteuid" method available

[Ivan N Paz]

In my personal case I was using Slackware8 and still
couldnt compile samba 2.2.2 with kernel 2.4.5 (that was
the only difference from another machine running Slack8
but with kernel 2.2.19)

So it is not a HP related stuff....

Ivan

-----------------------------------------------------
                     Ivan N Paz
              Administracion de la Red
             Instituto Superior de Arte
                  La Habana. Cuba
-----------------------------------------------------

On Fri, 14 Dec 2001, MCCALL,DON (HP-USA,ex1) wrote:

> The main issue is actually that you MUST use the HP ANSI c compiler or gc=
c,
> NOT the c complier that comes bundled
> free with HP-UX - the bundled compiler is NOT ansi c compatible....
> Hope this helps,
> Don
>=20
> -----Original Message-----
> From: Tom.Williams at diversifiedsoftware.com
> [mailto:Tom.Williams at diversifiedsoftware.com]
> Sent: Thursday, December 13, 2001 6:15 PM
> To: ivan at isa.cult.cu
> Cc: gary_zawilinski at gdt1.com; samba at lists.samba.org;
> samba-admin at lists.samba.org
> Subject: Re: No "seteuid" method available
>=20
>=20
>=20
> Hi!  I was encountering this SAME problem and I think I have a clue as to
> how to fix it (on HP-UX 11.00 at least).  I found this in the "README.hpu=
x"
> file from the HP-UX 11.00 binary bundle I downloaded from the Samba site:=
=20
>=20
> $ more README.hpux=20
> This file (samba-2.2.2-hppa1.1-hp-hpux11.00.tar.gz) contains Samba 2.2.2=
=20
> compiled for HP-UX 11.x using the HP ANSI C compiler. It must be extracte=
d=20
> into /opt/ which will create the directory /opt/samba/ and place everythi=
ng=20
> there.  To extract:=20
>=20
>   # cd /opt=20
>   # gzcat samba-2.2.2-hppa1.1-hp-hpux11.00.tar.gz | tar xf -=20
>  =20
> Samba was compiled with the following options:=20
>=20
>   CC=3Dcc \=20
>   CFLAGS=3D"+O2 -Ae +ESlit +Onofltacc +DAportable +Oentrysched +Odatapref=
etch"
> \=20
>     ./configure --prefix=3D/opt/samba --with-automount \=20
>                 --localstatedir /var/opt/samba \=20
>                 --with-lockdir=3D/var/opt/samba/locks \=20
>                 --with-privatedir=3D/etc/opt/samba/private \=20
>                 --with-sambabook=3D/opt/samba/doc/using-samba=20
>=20
> Samba is covered under the GNU Copyleft (GPL), available at=20
> http://www.gnu.org/copyleft/gpl.html. Source to Samba 2.2.2 is available=
=20
> from http://www.samba.org/.=20
>=20
> - 11/05/01=20
> $=20
>=20
> I'm going to try using these compiler options to see if I can get it to
> compile myself.=20
>=20
> I hope this helps.=20
>=20
> Peace.....=20
>=20
> Tom
>=20
>=20
>=20
>=20
>   _____ =20
>=20
>  <http://www.dvdprofiler.com/mycollection.asp?alias=3Dtomdkat> My DVD
> Collection=20
>=20
>=20
>=20
> =09Iv=E1n N Paz <ivan at isa.cult.cu>=20
> Sent by: samba-admin at lists.samba.org=20
>=20
>=20
> 12/13/01 11:41 AM=20
>=20
>=20
>        =20
>         To:        "Gary Zawilinski" <gary_zawilinski at gdt1.com>,
> <samba at lists.samba.org>=20
>         cc:        =20
>         Subject:        Re: No "seteuid" method available
>=20
>=20
>=20
> Hi Gary,
>=20
> I had the SAME problem when I first tried to compile samba 2.2.2 I had
> Slackware 8 at home and could not compile due to this.... :(
>=20
> Then at school where I kinda manage a small network installed Slackware 8
> again and tried to compile Samba again, only that this time it DID worked=
!!!
>=20
> Honestly I dont know where the diference was... only that at my place I w=
as
> running Kernel 2.4.5 (plain vanilla kernel that comes with the distro) an=
d
> at school
> I was running the same distro but with Kernel 2.2.19...
>=20
> Any more ideas about this???? I=B4m truely concerned abou this problem to=
o...
>=20
> Ivan
>=20
> ----- Original Message -----
> From: "Gary Zawilinski" <gary_zawilinski at gdt1.com>
> To: <samba at lists.samba.org>
> Sent: Saturday, December 08, 2001 4:23 PM
> Subject: No "seteuid" method available
>=20
>=20
> > Hey Everyone:
> >
> > "No seteuid method available" is the error I get when trying to configu=
re
> Samba 2.2.2 on an HP-UX 11.0 system. This system is part
> of a test network and has tcp/ip but no DNS. There are only 3 articles on
> the Samba site about this and the only fix requires
> changing and recompiling "C" libraries. Is there another, simpler fix?
> Thanks.
> >
> >
> > ~ Gary Zawilinski ~
> > Information Technology
> >
> >
> >
> > **********************************************************************
> > This email and any files transmitted with it are confidential and
> > intended solely for the use of the individual or entity to whom they
> > are addressed. If you have received this email in error please notify
> > the system manager.
> >
> > This message has been scanned for viruses.
> > **********************************************************************
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  http://lists.samba.org/mailman/listinfo/samba
> >
> >
>=20
>=20
> --=20
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba
>=20
>=20
>=20
>=20
>=20