Oops... think I answered the wrong question...

[Michael Polek]

Hi,
  I just realized you don't see it in the neighborhood at all...
Is the NT machine on the same LAN segment as the Linux box?
If not, try 
  remote announce = [IP of NT machine] 
in your smb.conf.  And make sure you have WINS configured
appropriately so that the NT box will know where to find the Linux
server.

Take care,
Mike


>>  ------------
>>  Date:   Mon, 26 Jun 2000 17:47:00 -0400
>>  From:   Dana <Dana at nerdsintheknow.com>
>>  To:     samba at samba.org
>>  Subject: SAMBA and the windows NT browse list
>>  Message-ID: <4.3.2.7.0.20000626173247.00afa2f0 at mail.nerdsintheknow.com>
M>>  ime-Version: 1.0
>>  Content-Type: text/plain; charset="us-ascii"; format=flowed
>>  
>>  I was using RH5.2 to learn Linux and had succesfully configured SAMBA.  I 
>>  decided to update toa newer version of SAMBA (2.06 i believe) and have run 
>>  into only one problem.  Using a windows NT box I can search for the SAMBA 
>>  machine and find it but it will not show up in network neighborhood.  and 
>>  solutions?
>>  
>>  -Dana