2.0.6 Problem

[Naveed Ahmed]

I have done so and set path = /disk0/Naveed, but still can't browse shares
it gives following message

smbc \\acsys2\naveed
added interface ip=135.1.1.2 bcast=135.1.255.255 nmask=255.255.0.0
Password:
Domain=[POIROT] OS=[Unix] Server=[Samba 2.0.6]

smb: \> dir
ERRDOS - ERRbadfile (File not found.) listing \*

                40960 blocks of size 512. 1 blocks available

Smbclient gives OS=[Unix] is problem due to this?

Naveed
----- Original Message -----
From: "John E. Malmberg" <wb8tyw at qsl.net>
To: <samba-vms at lists.samba.org>
Sent: Tuesday, April 30, 2002 9:27 AM
Subject: Re: 2.0.6 Problem


> There has been a few reports that physical device names are not working
> properly in the smb.conf file for SAMBA 2.0.6.
>
> This indicates a bug in Frontport that would need to be fixed.
>
> The workaround is to use concealed logical names like:
>
> $define/system/exec/trans=concealed user_disk dka0:
>
> The use of physical device names is discouraged in OpenVMS.  Logical
> names allow easier system management, especially through upgrades of
> disk hardware.
>
> -John
> wb8tyw at qsl.network
> Personal Opinion Only
>
>
> "Naveed Ahmed" <Greatman at Softhome.network> wrote:
>  >
>  > Samba 2.0.6 is configured properly on Alpha but I can't browse
>  > custom shares like
>  >
>  > [Naveed] path = /dka0/Naveed
>  > public = yes
>  > guest ok = yes
>  > only guest = yes
>  > writable = yes
>  > printable = no
>  >
>  > Testparm give no error for Naveed but Samba gives message when I run
>  > smbclient \\acsys2\Naveed tree connect failed:
>  > ERRSRV - ERRinvnetname (Invalid network name in tree connect.)
>  > also entry in
>  > log file is [2002/04/29 16:50:06, 0]
>  > CMS_ROOT:[SAMBA.SOURCE.SMBD]SERVICE.C;2:(486) Can't change directory
>  > to /dka0/Naveed (no such file or directory)
>  >
>  > Although directory Naveed exists in DKA0, and same setting works in
>  > VAX for SAMBA 2.0.3
>
>