backend provision samba4-ol-multimaster working

[Oliver Liebel]

Oliver Liebel schrieb:
>
>
> Andrew Bartlett schrieb:
>> On Tue, 2008-08-19 at 09:15 +1000, Andrew Bartlett wrote:
>>  
>>> On Mon, 2008-08-18 at 15:24 +0200, Oliver Liebel wrote:
>>>    
>>>> Andrew Bartlett schrieb:
>>>>      
>>>>> On Mon, 2008-08-18 at 13:55 +0200, Oliver Liebel wrote:
>>>>>          
>>>>>> Oliver Liebel schrieb:
>>>>>>     but please take a short look on it, if its okay the way i 
>>>>>> made it,
>>>>>> before i start to setup the syncrepl-blocks:
>>>>>>               
>>>>> Yep, that looks exactly right.
>>>>>
>>>>> Andrew Bartlett
>>>>>           
>>>> .... done, complete mmr-setup is working now as wanted, using the 
>>>> templating system
>>>> (see attached files and diffs).
>>>> please take a look on it, if its allright for you, we can talk 
>>>> about the next steps.
>>>>       
>>> I hope to apply that to the tree today.      
>>
>> Can you check the current GIT tree, and see that I haven't stuffed
>> anything up applying your patch?
>>   
> please use the attached mmr_syncrepl.conf (or check the old one) ;
> i  left a hidden <tabulator> on the last line , wich will produce an 
> config-file error when starting slapd.
>
> another important point: please use the two several loops i made, one 
> for the serverid-count,
> one for the rid-count of the syncrepl-blocks.
> although the serverids and rids are unique, its not the way to handle it.
> the serverids should use a straight count form 1-n,
> and the rids too. serverids and rids can use the same count (from 1) 
> as they are handled
> seperately during replication.
> a straight serverid and rid count will make the config file more easy 
> to read and understand,
> and will be relevant in particular when debugging replication
> issues, so please change it back to the originally intended form (2 
> loops, both counting from 1).
i forgot to mention, that you didnt use the separate replication port 
(in my example 9000). 
i _will_ cause trouble, if samba-ldap and slapd both listen to the same 
port,
so please change it back to 9000 (or another free port)

>
>> The next steps I think will be to move to a SASL password, then to
>> replicate the Samba control partition, and finally to replicate
>> cn=config.
>>
>> Thanks,
>>
>> Andrew Bartlett
>>
>>   
>
>
> ____________
> Virus checked by G DATA AntiVirusKit
> Version: AVK 18.5066 from 19.08.2008
> Virus news: www.antiviruslab.com
>

____________
Virus checked by G DATA AntiVirusKit
Version: AVK 18.5067 from 19.08.2008
Virus news: www.antiviruslab.com