Problem using rsync for backing up on to a NAS

[Thomas Ebert]

Sorry for being impatient, but no one has a clue about my problem?

Thanks

Thomas


-------- Original-Nachricht --------
> Datum: Mon, 25 Aug 2008 16:43:29 +0200
> Von: Thomas Ebert <ThoEbert at gmx.net>
> An: rsync at lists.samba.org
> Betreff: Re: Problem using rsync for backing up on to a NAS

> Hi!
> 
> After searching again I tried the option -W because it is suggested for 
> backups over LAN.
> 
> But again I get following error message:
> 
> usr/share/terminfo/l/
> deleting usr/share/terminfo/l/LFT-PC850
> rsync: stat 
> "/home/thomas/DiskStation/Thomas/backup/molungus-root/2008-08-25/usr/share/terminfo/L/LFT-PC850"
> failed: No such file or directory (2)
> usr/share/terminfo/l/lft => usr/share/terminfo/l/lft-pc850
> rsync: link 
> "/home/thomas/DiskStation/Thomas/backup/molungus-root/2008-08-25/usr/share/terminfo/L/LFT-PC850"
> => usr/share/terminfo/l/lft-pc850 failed: File exists (17)
> rsync: unlink 
> "/home/thomas/DiskStation/Thomas/backup/molungus-root/2008-08-25/." 
> failed: Is a directory (21)
> File index not found: 7235938 (-1 - 185115)
> rsync error: protocol incompatibility (code 2) at hlink.c(488) 
> [generator=3.0.3]
> rsync error: received SIGUSR1 (code 19) at main.c(1286) [receiver=3.0.3]
> rsync: connection unexpectedly closed (47697 bytes received so far)
> [sender]
> rsync error: error in rsync protocol data stream (code 12) at io.c(635) 
> [sender=3.0.3]
> 
> Kind regards
> 
> Thomas
> 
> Thomas Ebert schrieb:
> > Hi,
> >
> > I have a problem that was already discused in the german archlinux 
> > forum and couldn't be solved. Because of this I was asked to use the 
> > rsync mailing list. So here I am ;b
> >
> > I'm using the following script to backup my data to a Network Attached 
> > Storage that has an ext3 formated hdd that is mounted via NFS
> >
> > script: http://pastebin.com/f6b7115c9
> >
> > This script works fine for /home but using it for /  always fails at 
> > the folder /usr/share/terminfo
> >
> > Here are three error messages: http://pastebin.com/f75703bda, 
> > http://pastebin.com/f235bd2e5 and http://pastebin.com/f6ff5890a
> >
> > I tried the same script on an USB-HDD and it works fine, even for /
> >
> > Here are some information about the NFS config:
> >
> > cat /proc/mounts | grep nfs: http://pastebin.com/f250c9f63 (I aslo 
> > tried bigger rsize and wsize)
> >
> > exportfs -v:
> > /volume1        192.168.0.13(rw,wdelay,no_root_squash,no_subtree_check)
> >
> > cat /var/lib/nfs/etab:
> > /volume1        
> >
> 192.168.0.13(rw,sync,wdelay,hide,nocrossmnt,secure,no_root_squash,no_all_squash,no_subtree_check,secure_locks,acl,anonuid=65534,anongid=65534) 
> >
> >
> > cat /var/lib/nfs/xtab:
> > /volume1        
> >
> molungus(rw,sync,wdelay,hide,nocrossmnt,secure,no_root_squash,no_all_squash,no_subtree_check,secure_locks,acl,anonuid=65534,anongid=65534) 
> >
> >
> > I already deleted everything and started a new backup but this also 
> > failed after the first day.
> >
> > I hope you can help me. If you need further informations please let me 
> > know.
> >
> > Thanks
> >
> > Thomas
> >
> > P.S.: For those who speak German here you can find the thread in the 
> > archlinux forum: 
> > http://forum.archlinux.de/?page=Postings;id=20;thread=8597;post=0
> >
> >
> >
> -- 
> Please use reply-all for most replies to avoid omitting the mailing list.
> To unsubscribe or change options:
> https://lists.samba.org/mailman/listinfo/rsync
> Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html