[clug] Pioneer L11 touch with Ubuntu (was Re: DreamBook?)
Sanders King
sanders at mupanda.com
Thu Dec 2 18:55:23 MST 2010
Okay. Here is is. Unfiltered, as I wasn't sure how much you might want.
Cheers
dmesg
-------------------------------------------------------------------------------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-26-generic (buildd at roseapple) (gcc
version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #47-Ubuntu SMP Wed Nov 17 15:59:05
UTC 2010 (Ubuntu 2.6.32-26.47-generic 2.6.32.24+drm33.11)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f2f6000 (usable)
[ 0.000000] BIOS-e820: 000000007f2f6000 - 000000007f2f8000 (reserved)
[ 0.000000] BIOS-e820: 000000007f2f8000 - 000000007f2ff000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f2ff000 - 000000007f3ee000 (usable)
[ 0.000000] BIOS-e820: 000000007f3ee000 - 000000007f434000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f434000 - 000000007f43d000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f43d000 - 000000007f440000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f440000 - 000000007f46a000 (reserved)
[ 0.000000] BIOS-e820: 000000007f46a000 - 000000007f46b000 (usable)
[ 0.000000] BIOS-e820: 000000007f46b000 - 000000007f475000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f475000 - 000000007f49f000 (reserved)
[ 0.000000] BIOS-e820: 000000007f49f000 - 000000007f600000 (usable)
[ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F600000 mask 0FFF00000 write-through
[ 0.000000] 2 base 07F700000 mask 0FFF00000 uncachable
[ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009d800 (usable)
[ 0.000000] modified: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f2f6000 (usable)
[ 0.000000] modified: 000000007f2f6000 - 000000007f2f8000 (reserved)
[ 0.000000] modified: 000000007f2f8000 - 000000007f2ff000 (ACPI NVS)
[ 0.000000] modified: 000000007f2ff000 - 000000007f3ee000 (usable)
[ 0.000000] modified: 000000007f3ee000 - 000000007f434000 (ACPI NVS)
[ 0.000000] modified: 000000007f434000 - 000000007f43d000 (ACPI data)
[ 0.000000] modified: 000000007f43d000 - 000000007f440000 (ACPI NVS)
[ 0.000000] modified: 000000007f440000 - 000000007f46a000 (reserved)
[ 0.000000] modified: 000000007f46a000 - 000000007f46b000 (usable)
[ 0.000000] modified: 000000007f46b000 - 000000007f475000 (ACPI NVS)
[ 0.000000] modified: 000000007f475000 - 000000007f49f000 (reserved)
[ 0.000000] modified: 000000007f49f000 - 000000007f600000 (usable)
[ 0.000000] modified: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37856000 - 37fef5f9
[ 0.000000] Allocated new RAMDISK: 008e1000 - 0107a5f9
[ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef5f8 to
008e1000 - 0107a5f8
[ 0.000000] ACPI: RSDP 000f0420 00024 (v03 AMI )
[ 0.000000] ACPI: XSDT 7f434080 00054 (v01 AMI APTIO 01072009 AMI
00010013)
[ 0.000000] ACPI: FACP 7f43ca48 000F4 (v04 AMI APTIO 01072009 AMI
00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS
tables! (20090903/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
7F471F40/000000007F471F80, using 32 (20090903/tbfadt-486)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address
or length: 0000000000000820/0 (20090903/tbfadt-557)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 0, using
default 8 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT 7f434168 088DE (v02 AMI APTIO 00000000 INTL
20051117)
[ 0.000000] ACPI: FACS 7f471f40 00040
[ 0.000000] ACPI: APIC 7f43cb40 00072 (v01 AMI APTIO 01072009 AMI
00010013)
[ 0.000000] ACPI: MCFG 7f43cbb8 0003C (v01 AMI APTIO 01072009 MSFT
00000097)
[ 0.000000] ACPI: SLIC 7f43cbf8 00176 (v01 AMI APTIO 01072009 AMI
00010013)
[ 0.000000] ACPI: HPET 7f43cd70 00038 (v01 AMI APTIO 01072009 AMI.
00000004)
[ 0.000000] ACPI: ECDT 7f43cda8 000C1 (v01 AMI APTIO 01072009 AMI.
00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==>
[0000100000 - 00008dced8]
[ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==>
[000009d800 - 0000100000]
[ 0.000000] #5 [00008dd000 - 00008e0212] BRK ==>
[00008dd000 - 00008e0212]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==>
[0000010000 - 0000011000]
[ 0.000000] #7 [00008e1000 - 000107a5f9] NEW RAMDISK ==>
[00008e1000 - 000107a5f9]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==>
[0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00fcc30] fcc30
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007f2f6
[ 0.000000] 0: 0x0007f2ff -> 0x0007f3ee
[ 0.000000] 0: 0x0007f46a -> 0x0007f46b
[ 0.000000] 0: 0x0007f49f -> 0x0007f600
[ 0.000000] On node 0 totalpages: 521428
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map
c107c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 291916 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288
u1048576
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 517351
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic
root=UUID=6faf5cd7-8444-461a-a0fd-b33c197690a1 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10434240 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f600)
[ 0.000000] Memory: 2041068k/2086912k available (4682k kernel code,
43448k reserved, 2121k data, 656k init, 1176868k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc0592847 - 0xc07a4e68 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0592847 (4682 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1679.136 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3358.27 BogoMIPS (lpj=6716544)
[ 0.004043] Security Framework initialized
[ 0.004082] AppArmor: AppArmor initialized
[ 0.004099] Mount-cache hash table entries: 512
[ 0.004325] Initializing cgroup subsys ns
[ 0.004334] Initializing cgroup subsys cpuacct
[ 0.004344] Initializing cgroup subsys memory
[ 0.004358] Initializing cgroup subsys devices
[ 0.004364] Initializing cgroup subsys freezer
[ 0.004369] Initializing cgroup subsys net_cls
[ 0.004405] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004411] CPU: L2 cache: 512K
[ 0.004417] CPU: Physical Processor ID: 0
[ 0.004421] CPU: Processor Core ID: 0
[ 0.004428] mce: CPU supports 5 MCE banks
[ 0.004441] CPU0: Thermal monitoring enabled (TM2)
[ 0.004450] using mwait in idle threads.
[ 0.004461] Performance Events: Atom events, Intel PMU driver.
[ 0.004477] ... version: 3
[ 0.004482] ... bit width: 40
[ 0.004486] ... generic registers: 2
[ 0.004491] ... value mask: 000000ffffffffff
[ 0.004495] ... max period: 000000007fffffff
[ 0.004500] ... fixed-purpose events: 3
[ 0.004505] ... event mask: 0000000700000003
[ 0.004513] Checking 'hlt' instruction... OK.
[ 0.020015] Disabling 4MB page tables to avoid TLB bug
[ 0.024210] ACPI: Core revision 20090903
[ 0.044025] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044036] ftrace: allocating 21794 entries in 43 pages
[ 0.048110] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089401] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.176112] CPU1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.176138] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180039] Brought up 2 CPUs
[ 0.180046] Total of 2 processors activated (6716.71 BogoMIPS).
[ 0.180302] CPU0 attaching sched-domain:
[ 0.180310] domain 0: span 0-1 level SIBLING
[ 0.180316] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.180328] domain 1: span 0-1 level MC
[ 0.180333] groups: 0-1 (cpu_power = 1178)
[ 0.180345] CPU1 attaching sched-domain:
[ 0.180349] domain 0: span 0-1 level SIBLING
[ 0.180354] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.180366] domain 1: span 0-1 level MC
[ 0.180371] groups: 0-1 (cpu_power = 1178)
[ 0.180537] devtmpfs: initialized
[ 0.180537] regulator: core version 0.5
[ 0.180537] Time: 12:44:10 Date: 12/03/10
[ 0.180537] NET: Registered protocol family 16
[ 0.180537] Trying to unpack rootfs image as initramfs...
[ 0.180537] EISA bus registered
[ 0.180552] ACPI: bus type pci registered
[ 0.180723] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 -
63
[ 0.180732] PCI: Not using MMCONFIG.
[ 0.200094] PCI: Using configuration type 1 for base access
[ 0.203238] bio: create slab <bio-0> at 0
[ 0.206265] ACPI: EC: EC description table is found, configuring boot EC
[ 0.210773] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.227607] ACPI: Interpreter enabled
[ 0.227619] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.227699] ACPI: Using IOAPIC for interrupt routing
[ 0.227844] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 -
63
[ 0.228085] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.228093] PCI: Using MMCONFIG for extended config space
[ 0.233945] ACPI: BIOS _OSI(Linux) query ignored
[ 0.256047] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.256777] ACPI: No dock devices found.
[ 0.257486] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.257665] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe380000-0xfe3fffff]
[ 0.257677] pci 0000:00:02.0: reg 14 io port: [0xf170-0xf177]
[ 0.257689] pci 0000:00:02.0: reg 18 32bit mmio pref:
[0xe0000000-0xefffffff]
[ 0.257700] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe100000-0xfe1fffff]
[ 0.257760] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe300000-0xfe37ffff]
[ 0.257879] pci 0000:00:1a.0: reg 20 io port: [0xf0c0-0xf0df]
[ 0.257947] pci 0000:00:1a.1: reg 20 io port: [0xf0a0-0xf0bf]
[ 0.258024] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe407000-0xfe4073ff]
[ 0.258094] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.258105] pci 0000:00:1a.7: PME# disabled
[ 0.258168] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe400000-0xfe403fff]
[ 0.258230] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.258240] pci 0000:00:1b.0: PME# disabled
[ 0.258329] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.258338] pci 0000:00:1c.0: PME# disabled
[ 0.258427] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.258436] pci 0000:00:1c.2: PME# disabled
[ 0.258504] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f]
[ 0.258573] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f]
[ 0.258641] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f]
[ 0.258716] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe406000-0xfe4063ff]
[ 0.258782] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.258791] pci 0000:00:1d.7: PME# disabled
[ 0.258955] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.258966] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6
GPIO
[ 0.258976] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068
(mask 0007)
[ 0.259039] pci 0000:00:1f.1: reg 10 io port: [0xf160-0xf167]
[ 0.259054] pci 0000:00:1f.1: reg 14 io port: [0xf150-0xf153]
[ 0.259069] pci 0000:00:1f.1: reg 18 io port: [0xf140-0xf147]
[ 0.259082] pci 0000:00:1f.1: reg 1c io port: [0xf130-0xf133]
[ 0.259095] pci 0000:00:1f.1: reg 20 io port: [0xf120-0xf12f]
[ 0.259169] pci 0000:00:1f.2: reg 10 io port: [0xf110-0xf117]
[ 0.259181] pci 0000:00:1f.2: reg 14 io port: [0xf100-0xf103]
[ 0.259193] pci 0000:00:1f.2: reg 18 io port: [0xf0f0-0xf0f7]
[ 0.259205] pci 0000:00:1f.2: reg 1c io port: [0xf0e0-0xf0e3]
[ 0.259217] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
[ 0.259230] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe405000-0xfe4057ff]
[ 0.259270] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.259279] pci 0000:00:1f.2: PME# disabled
[ 0.259316] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe404000-0xfe4040ff]
[ 0.259342] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[ 0.259441] pci 0000:01:00.0: reg 10 64bit mmio: [0xfe200000-0xfe20ffff]
[ 0.259520] pci 0000:01:00.0: supports D1
[ 0.259526] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.259536] pci 0000:01:00.0: PME# disabled
[ 0.259612] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe200000-0xfe2fffff]
[ 0.259699] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe000000-0xfe00ffff]
[ 0.259722] pci 0000:02:00.0: reg 18 64bit mmio: [0xfd800000-0xfdffffff]
[ 0.259865] pci 0000:00:1c.2: bridge 32bit mmio: [0xfd800000-0xfe0fffff]
[ 0.259942] pci 0000:00:1e.0: transparent bridge
[ 0.259974] pci_bus 0000:00: on NUMA node 0
[ 0.260021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.260342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.260637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.260816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PB._PRT]
[ 0.329795] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[ 0.329795] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.329795] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.329907] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14
15)
[ 0.332229] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14
15)
[ 0.332552] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 0.332878] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14
15)
[ 0.333207] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14
15)
[ 0.333541] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.333573] vgaarb: loaded
[ 0.333925] SCSI subsystem initialized
[ 0.334151] libata version 3.00 loaded.
[ 0.334380] usbcore: registered new interface driver usbfs
[ 0.334421] usbcore: registered new interface driver hub
[ 0.334506] usbcore: registered new device driver usb
[ 0.334957] ACPI: WMI: Mapper loaded
[ 0.334964] PCI: Using ACPI for IRQ routing
[ 0.335341] NetLabel: Initializing
[ 0.335348] NetLabel: domain hash size = 128
[ 0.335354] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.335387] NetLabel: unlabeled traffic allowed by default
[ 0.335494] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.335510] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.340115] Switching to clocksource tsc
[ 0.344684] AppArmor: AppArmor Filesystem Enabled
[ 0.344719] pnp: PnP ACPI init
[ 0.344754] ACPI: bus type pnp registered
[ 0.350550] pnp: PnP ACPI: found 9 devices
[ 0.350560] ACPI: ACPI bus type pnp unregistered
[ 0.350569] PnPBIOS: Disabled by ACPI PNP
[ 0.350608] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.350618] system 00:01: iomem range 0xf0000000-0xf3ffffff has been
reserved
[ 0.350639] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.350648] system 00:02: ioport range 0x480-0x4bf has been reserved
[ 0.350659] system 00:02: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.350669] system 00:02: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.350678] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.350688] system 00:02: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.350698] system 00:02: iomem range 0xffe00000-0xffffffff has been
reserved
[ 0.350722] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.350734] system 00:06: iomem range 0xffa00000-0xffbfffff has been
reserved
[ 0.385874] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.385886] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.385897] pci 0000:00:1c.0: MEM window: 0xfe200000-0xfe2fffff
[ 0.385908] pci 0000:00:1c.0: PREFETCH window:
0x00000080000000-0x000000801fffff
[ 0.385921] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 0.385929] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.385939] pci 0000:00:1c.2: MEM window: 0xfd800000-0xfe0fffff
[ 0.385949] pci 0000:00:1c.2: PREFETCH window:
0x00000080200000-0x000000803fffff
[ 0.385962] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.385969] pci 0000:00:1e.0: IO window: disabled
[ 0.385978] pci 0000:00:1e.0: MEM window: disabled
[ 0.385986] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.386021] alloc irq_desc for 22 on node -1
[ 0.386028] alloc kstat_irqs on node -1
[ 0.386045] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.386056] pci 0000:00:1c.0: setting latency timer to 64
[ 0.386077] alloc irq_desc for 20 on node -1
[ 0.386084] alloc kstat_irqs on node -1
[ 0.386096] pci 0000:00:1c.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.386107] pci 0000:00:1c.2: setting latency timer to 64
[ 0.386123] pci 0000:00:1e.0: setting latency timer to 64
[ 0.386135] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.386143] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.386152] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
[ 0.386161] pci_bus 0000:01: resource 1 mem: [0xfe200000-0xfe2fffff]
[ 0.386169] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.386178] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.386186] pci_bus 0000:02: resource 1 mem: [0xfd800000-0xfe0fffff]
[ 0.386194] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.386203] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.386210] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.386299] NET: Registered protocol family 2
[ 0.386570] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.387498] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.389604] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.390109] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.390120] TCP reno registered
[ 0.390369] NET: Registered protocol family 1
[ 0.390420] pci 0000:00:02.0: Boot video device
[ 0.947696] cpufreq-nforce2: No nForce2 chipset.
[ 0.947773] Scanning for low memory corruption every 60 seconds
[ 0.948053] audit: initializing netlink socket (disabled)
[ 0.948079] type=2000 audit(1291380250.947:1): initialized
[ 0.968770] highmem bounce pool size: 64 pages
[ 0.968787] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.973819] VFS: Disk quotas dquot_6.5.2
[ 0.974005] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.975941] fuse init (API version 7.13)
[ 0.976223] msgmni has been set to 1690
[ 0.976870] alg: No test for stdrng (krng)
[ 0.977056] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.977065] io scheduler noop registered
[ 0.977071] io scheduler anticipatory registered
[ 0.977077] io scheduler deadline registered
[ 0.977216] io scheduler cfq registered (default)
[ 0.977528] alloc irq_desc for 24 on node -1
[ 0.977535] alloc kstat_irqs on node -1
[ 0.977555] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.977570] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.977786] alloc irq_desc for 25 on node -1
[ 0.977792] alloc kstat_irqs on node -1
[ 0.977807] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
[ 0.977821] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.978027] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.978062] Firmware did not grant requested _OSC control
[ 0.978110] Firmware did not grant requested _OSC control
[ 0.978205] Firmware did not grant requested _OSC control
[ 0.978246] Firmware did not grant requested _OSC control
[ 0.978290] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.979462] ACPI: AC Adapter [AC0] (off-line)
[ 0.979694] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.979704] ACPI: Power Button [PWRB]
[ 0.979839] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.979849] ACPI: Power Button [PWRF]
[ 0.981400] ACPI: SSDT 7f46cc18 00374 (v01 AMI IST 00000001 MSFT
03000001)
[ 0.983470] Monitor-Mwait will be used to enter C-1 state
[ 0.983567] Monitor-Mwait will be used to enter C-2 state
[ 0.983649] Monitor-Mwait will be used to enter C-3 state
[ 0.983669] Marking TSC unstable due to TSC halts in idle
[ 0.983812] processor LNXCPU:00: registered as cooling_device0
[ 0.984708] Switching to clocksource hpet
[ 0.993158] processor LNXCPU:01: registered as cooling_device1
[ 1.005403] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.009414] brd: module loaded
[ 1.010992] loop: module loaded
[ 1.011276] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.011559] ata_piix 0000:00:1f.1: version 2.13
[ 1.011585] alloc irq_desc for 19 on node -1
[ 1.011592] alloc kstat_irqs on node -1
[ 1.011608] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 1.011684] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.011901] isapnp: Scanning for PnP cards...
[ 1.060570] scsi0 : ata_piix
[ 1.068556] scsi1 : ata_piix
[ 1.071955] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf120 irq
14
[ 1.071965] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf128 irq
15
[ 1.073042] Fixed MDIO Bus: probed
[ 1.073144] PPP generic driver version 2.4.2
[ 1.073267] tun: Universal TUN/TAP device driver, 1.6
[ 1.073273] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 1.073496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.073540] alloc irq_desc for 18 on node -1
[ 1.073547] alloc kstat_irqs on node -1
[ 1.073562] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 1.073593] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.073601] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.073694] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 1.073746] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.077651] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.077694] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe407000
[ 1.092641] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.092912] usb usb1: configuration #1 chosen from 1 choice
[ 1.092999] hub 1-0:1.0: USB hub found
[ 1.093022] hub 1-0:1.0: 4 ports detected
[ 1.093152] alloc irq_desc for 23 on node -1
[ 1.093158] alloc kstat_irqs on node -1
[ 1.093172] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.093204] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.093212] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.093309] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 1.093359] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.097243] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.097276] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe406000
[ 1.121000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.121274] usb usb2: configuration #1 chosen from 1 choice
[ 1.121356] hub 2-0:1.0: USB hub found
[ 1.121385] hub 2-0:1.0: 6 ports detected
[ 1.121530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.121576] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.121652] alloc irq_desc for 16 on node -1
[ 1.121658] alloc kstat_irqs on node -1
[ 1.121673] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1.121689] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.121697] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.121801] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 1.121854] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 1.122098] usb usb3: configuration #1 chosen from 1 choice
[ 1.122175] hub 3-0:1.0: USB hub found
[ 1.122193] hub 3-0:1.0: 2 ports detected
[ 1.122297] alloc irq_desc for 21 on node -1
[ 1.122304] alloc kstat_irqs on node -1
[ 1.122316] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 1.122329] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.122336] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.122446] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 1.122494] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
[ 1.122735] usb usb4: configuration #1 chosen from 1 choice
[ 1.122814] hub 4-0:1.0: USB hub found
[ 1.122833] hub 4-0:1.0: 2 ports detected
[ 1.122939] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.122952] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.122960] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.123055] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[ 1.123090] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 1.123320] usb usb5: configuration #1 chosen from 1 choice
[ 1.123396] hub 5-0:1.0: USB hub found
[ 1.123414] hub 5-0:1.0: 2 ports detected
[ 1.123521] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.123535] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.123542] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.123628] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[ 1.123677] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 1.123909] usb usb6: configuration #1 chosen from 1 choice
[ 1.123986] hub 6-0:1.0: USB hub found
[ 1.124007] hub 6-0:1.0: 2 ports detected
[ 1.124119] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 1.124132] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.124139] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.124228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[ 1.124264] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 1.124541] usb usb7: configuration #1 chosen from 1 choice
[ 1.124773] hub 7-0:1.0: USB hub found
[ 1.124792] hub 7-0:1.0: 2 ports detected
[ 1.125039] PNP: No PS/2 controller found. Probing ports directly.
[ 1.366355] isapnp: No Plug & Play device found
[ 1.642317] Freeing initrd memory: 7781k freed
[ 1.668693] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.668718] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.668974] mice: PS/2 mouse device common for all mice
[ 1.669273] rtc_cmos 00:04: RTC can wake from S4
[ 1.669363] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.669420] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.669770] device-mapper: uevent: version 1.0.3
[ 1.670126] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel at redhat.com
[ 1.670342] device-mapper: multipath: version 1.1.0 loaded
[ 1.670350] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.670719] EISA: Probing bus 0 at eisa.0
[ 1.670732] Cannot allocate resource for EISA slot 1
[ 1.670739] Cannot allocate resource for EISA slot 2
[ 1.670769] EISA: Detected 0 cards.
[ 1.671289] cpuidle: using governor ladder
[ 1.671535] cpuidle: using governor menu
[ 1.672706] TCP cubic registered
[ 1.673177] NET: Registered protocol family 10
[ 1.674293] lo: Disabled Privacy Extensions
[ 1.675188] NET: Registered protocol family 17
[ 1.675406] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 1.678903] Using IPI No-Shortcut mode
[ 1.679117] PM: Resume from disk failed.
[ 1.679145] registered taskstats version 1
[ 1.679735] Magic number: 6:218:733
[ 1.679866] rtc_cmos 00:04: setting system clock to 2010-12-03 12:44:12
UTC (1291380252)
[ 1.679873] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.679877] EDD information not available.
[ 1.687788] ACPI: Battery Slot [BAT0] (battery present)
[ 1.699082] Freeing unused kernel memory: 656k freed
[ 1.699614] Write protecting the kernel text: 4684k
[ 1.699690] Write protecting the kernel read-only data: 1840k
[ 1.735278] udev: starting version 151
[ 2.076623] usb 2-6: new high speed USB device using ehci_hcd and address
3
[ 2.088327] ahci 0000:00:1f.2: version 3.0
[ 2.088362] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.088431] alloc irq_desc for 26 on node -1
[ 2.088439] alloc kstat_irqs on node -1
[ 2.088459] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 2.088609] ahci: SSS flag set, parallel bus scan disabled
[ 2.088659] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7
impl SATA mode
[ 2.088671] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo
pmp pio slum part ccc ems
[ 2.088683] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.104226] scsi2 : ahci
[ 2.104472] scsi3 : ahci
[ 2.104713] scsi4 : ahci
[ 2.105043] ata3: SATA max UDMA/133 abar m2048 at 0xfe405000 port 0xfe405100
irq 26
[ 2.105051] ata4: SATA max UDMA/133 abar m2048 at 0xfe405000 port 0xfe405180
irq 26
[ 2.105057] ata5: SATA max UDMA/133 abar m2048 at 0xfe405000 port 0xfe405200
irq 26
[ 2.446323] usb 2-6: configuration #1 chosen from 1 choice
[ 2.588130] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.593248] ata3.00: ATA-8: SanDisk pSSD-S2 32GB, SSD 6.00, max UDMA/133
[ 2.593260] ata3.00: 62533296 sectors, multi 1: LBA48
[ 2.602064] ata3.00: configured for UDMA/133
[ 2.616374] scsi 2:0:0:0: Direct-Access ATA SanDisk pSSD-S2
SSD PQ: 0 ANSI: 5
[ 2.616838] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.616891] sd 2:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0
GB/29.8 GiB)
[ 2.617250] sd 2:0:0:0: [sda] Write Protect is off
[ 2.617259] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.617347] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.617789] sda: sda1 sda2 < sda5 >
[ 2.624500] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.688121] usb 3-1: new full speed USB device using uhci_hcd and address
2
[ 2.847097] usb 3-1: configuration #1 chosen from 1 choice
[ 2.936126] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.092135] usb 6-1: new full speed USB device using uhci_hcd and address
2
[ 3.244916] usb 6-1: configuration #1 chosen from 1 choice
[ 3.272137] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.303039] usbcore: registered new interface driver hiddev
[ 3.307307] input: eGalax Inc. USB TouchController as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input4
[ 3.307804] generic-usb 0003:0EEF:72A1.0001: input,hiddev96,hidraw0: USB
HID v2.10 Pointer [eGalax Inc. USB TouchController] on
usb-0000:00:1a.0-1/input0
[ 3.307890] usbcore: registered new interface driver usbhid
[ 3.307900] usbhid: v2.6:USB HID core driver
[ 3.424490] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.199866] Adding 1332216k swap on /dev/sda5. Priority:-1 extents:1
across:1332216k SS
[ 4.308822] udev: starting version 151
[ 4.407839] lp: driver loaded but no devices found
[ 4.960595] Linux agpgart interface v0.103
[ 5.265346] cfg80211: Calling CRDA to update world regulatory domain
[ 5.295740] Bluetooth: Core ver 2.15
[ 5.306713] NET: Registered protocol family 31
[ 5.306721] Bluetooth: HCI device and connection manager initialized
[ 5.306729] Bluetooth: HCI socket layer initialized
[ 5.317326] asus_laptop: Asus Laptop Support version 0.42
[ 5.321138] asus_laptop: Lucid model detected
[ 5.321844] input: Asus Laptop extra buttons as
/devices/virtual/input/input5
[ 5.324805] cfg80211: World regulatory domain updated:
[ 5.324815] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 5.324825] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
[ 5.324834] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
[ 5.324843] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
[ 5.324851] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
[ 5.324860] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
[ 5.337203] Registered led device: asus::mail
[ 5.337259] Registered led device: asus::touchpad
[ 5.337307] Registered led device: asus::record
[ 5.337353] Registered led device: asus::phone
[ 5.343656] asus_laptop: Brightness ignored, must be controlled by ACPI
video driver
[ 5.413861] [drm] Initialized drm 1.1.0 20060810
[ 5.417883] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 5.418377] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 5.468301] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 5.504765] Linux video capture interface: v2.00
[ 5.582165] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.582526] usbcore: registered new interface driver btusb
[ 5.672204] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b213)
[ 5.683656] type=1505 audit(1291340656.500:2): operation="profile_load"
pid=706 name="/sbin/dhclient3"
[ 5.684944] input: USB 2.0 Camera as
/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input6
[ 5.685602] usbcore: registered new interface driver uvcvideo
[ 5.686264] USB Video Class driver (v0.1.0)
[ 5.688479] type=1505 audit(1291340656.508:3): operation="profile_load"
pid=706 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 5.689010] type=1505 audit(1291340656.508:4): operation="profile_load"
pid=706 name="/usr/lib/connman/scripts/dhclient-script"
[ 5.695787] psmouse serio1: ID: 10 00 64
[ 5.757481] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.757500] ath9k 0000:01:00.0: setting latency timer to 64
[ 5.806447] ath: EEPROM regdomain: 0x60
[ 5.806456] ath: EEPROM indicates we should expect a direct regpair map
[ 5.806466] ath: Country alpha2 being used: 00
[ 5.806471] ath: Regpair used: 0x60
[ 5.901265] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input7
[ 6.103301] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.103315] i915 0000:00:02.0: setting latency timer to 64
[ 6.141287] Bluetooth: L2CAP ver 2.14
[ 6.141296] Bluetooth: L2CAP socket layer initialized
[ 6.153666] alloc irq_desc for 27 on node -1
[ 6.153675] alloc kstat_irqs on node -1
[ 6.153696] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 6.153710] [drm] set up 7M of stolen space
[ 6.165138] type=1505 audit(1291340656.984:5): operation="profile_load"
pid=800 name="/usr/share/gdm/guest-session/Xsession"
[ 6.176847] type=1505 audit(1291340656.996:6):
operation="profile_replace" pid=805 name="/sbin/dhclient3"
[ 6.177585] type=1505 audit(1291340656.996:7):
operation="profile_replace" pid=805
name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 6.178010] type=1505 audit(1291340656.996:8):
operation="profile_replace" pid=805
name="/usr/lib/connman/scripts/dhclient-script"
[ 6.197615] type=1505 audit(1291340657.016:9): operation="profile_load"
pid=807 name="/usr/bin/evince"
[ 6.202045] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.202054] Bluetooth: BNEP filters: protocol multicast
[ 6.209834] type=1505 audit(1291340657.028:10): operation="profile_load"
pid=807 name="/usr/bin/evince-previewer"
[ 6.239965] type=1505 audit(1291340657.056:11): operation="profile_load"
pid=807 name="/usr/bin/evince-thumbnailer"
[ 6.240592] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.242523] Registered led device: ath9k-phy0::radio
[ 6.242578] Registered led device: ath9k-phy0::assoc
[ 6.242630] Registered led device: ath9k-phy0::tx
[ 6.242680] Registered led device: ath9k-phy0::rx
[ 6.242706] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0:
mem=0xf82a0000, irq=16
[ 6.285689] Bridge firewalling registered
[ 6.351769] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.351780] Bluetooth: SCO socket layer initialized
[ 6.357483] [drm] initialized overlay support
[ 6.788447] fb0: inteldrmfb frame buffer device
[ 6.788454] registered panic notifier
[ 6.797472] acpi device:40: registered as cooling_device2
[ 6.799200] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.799369] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:
no)
[ 6.799436] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 6.799584] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) ->
IRQ 21
[ 6.799660] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.812740] vga16fb: initializing
[ 6.812751] vga16fb: mapped to 0xc00a0000
[ 6.812761] vga16fb: not registering due to another framebuffer present
[ 6.920542] [drm] Big FIFO is enabled
[ 6.920562] [drm] Big FIFO is enabled
[ 6.941857] hda_codec: ALC269: BIOS auto-probing.
[ 6.942052] hda_codec: connection list not available for 0x24
[ 6.942252] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 7.048641] ppdev: user-space parallel port driver
[ 7.154910] Console: switching to colour frame buffer device 170x48
[ 7.737902] CPU0 attaching NULL sched-domain.
[ 7.737914] CPU1 attaching NULL sched-domain.
[ 7.760631] CPU0 attaching sched-domain:
[ 7.760639] domain 0: span 0-1 level SIBLING
[ 7.760645] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 7.760658] domain 1: span 0-1 level MC
[ 7.760664] groups: 0-1 (cpu_power = 1178)
[ 7.760675] CPU1 attaching sched-domain:
[ 7.760680] domain 0: span 0-1 level SIBLING
[ 7.760685] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 7.760696] domain 1: span 0-1 level MC
[ 7.760701] groups: 0-1 (cpu_power = 1178)
[ 11.110109] CPU0 attaching NULL sched-domain.
[ 11.110144] CPU1 attaching NULL sched-domain.
[ 11.177601] CPU0 attaching sched-domain:
[ 11.177613] domain 0: span 0-1 level SIBLING
[ 11.177621] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 11.177637] domain 1: span 0-1 level MC
[ 11.177643] groups: 0-1 (cpu_power = 1178)
[ 11.177661] CPU1 attaching sched-domain:
[ 11.177667] domain 0: span 0-1 level SIBLING
[ 11.177674] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 11.177689] domain 1: span 0-1 level MC
[ 11.177696] groups: 0-1 (cpu_power = 1178)
[ 23.804596] usb 2-2: new high speed USB device using ehci_hcd and address
4
[ 23.938311] usb 2-2: configuration #1 chosen from 1 choice
[ 24.991536] Initializing USB Mass Storage driver...
[ 25.007437] usbcore: registered new interface driver usb-storage
[ 25.007453] USB Mass Storage support registered.
[ 30.008760] usb 2-2: USB disconnect, address 4
[ 35.812121] usb 2-2: new high speed USB device using ehci_hcd and address
5
[ 35.946363] usb 2-2: configuration #1 chosen from 1 choice
[ 35.954069] scsi5 : SCSI emulation for USB Mass Storage devices
[ 35.954949] usb-storage: device found at 5
[ 35.954957] usb-storage: waiting for device to settle before scanning
[ 35.989022] usbcore: registered new interface driver usbserial
[ 35.990736] USB Serial support registered for generic
[ 35.991540] usbcore: registered new interface driver usbserial_generic
[ 35.991549] usbserial: USB Serial Driver core
[ 35.999045] USB Serial support registered for GSM modem (1-port)
[ 35.999494] option 2-2:1.0: GSM modem (1-port) converter detected
[ 36.000570] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 36.000653] option 2-2:1.1: GSM modem (1-port) converter detected
[ 36.001155] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 36.001255] option 2-2:1.3: GSM modem (1-port) converter detected
[ 36.001767] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 36.001824] option 2-2:1.4: GSM modem (1-port) converter detected
[ 36.002085] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 36.002133] usbcore: registered new interface driver option
[ 36.002140] option: v0.7.2:USB Driver for GSM modems
[ 38.044132] usb 5-1: new low speed USB device using uhci_hcd and address
2
[ 38.221390] usb 5-1: configuration #1 chosen from 1 choice
[ 38.263725] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input10
[ 38.264003] logitech 0003:046D:C517.0002: input,hidraw1: USB HID v1.10
Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 38.296163] logitech 0003:046D:C517.0003: fixing up Logitech keyboard
report descriptor
[ 38.297637] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input11
[ 38.301850] logitech 0003:046D:C517.0003: input,hiddev97,hidraw2: USB HID
v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 40.953031] usb-storage: device scan complete
[ 40.953916] scsi 5:0:0:0: Direct-Access ZTE MMC Storage
2.31 PQ: 0 ANSI: 2
[ 40.955166] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 40.967495] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 86.440192] PPP BSD Compression module registered
[ 86.453933] PPP Deflate Compression module registered
lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
Subsystem: Device 1b0a:00c7
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated
Graphics Controller
Subsystem: Device 1b0a:00c7
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at fe380000 (32-bit, non-prefetchable) [size=512K]
I/O ports at f170 [size=8]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at fe100000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics
Controller
Subsystem: Device 1b0a:00c7
Flags: bus master, fast devsel, latency 0
Memory at fe300000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 (rev 04)
Subsystem: Device 1b0a:00c7
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at f0c0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 04)
Subsystem: Device 1b0a:00c7
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at f0a0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 04) (prog-if 20)
Subsystem: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller
#2
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at fe407000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 04)
Subsystem: Device 1b0a:00c7
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at fe400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
1 (rev 04)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe200000-fe2fffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port
3 (rev 04)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fd800000-fe0fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 04)
Subsystem: Device 1b0a:00c7
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at f080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 04)
Subsystem: Device 1b0a:00c7
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at f060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 04)
Subsystem: Device 1b0a:00c7
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at f040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 04) (prog-if 20)
Subsystem: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller
#1
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fe406000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4)
(prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller (rev 04)
Subsystem: Device 1b0a:00c7
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE
Controller (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Device 1b0a:00c7
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at f120 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA
AHCI Controller (rev 04) (prog-if 01)
Subsystem: Device 1b0a:00c7
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 26
I/O ports at f110 [size=8]
I/O ports at f100 [size=4]
I/O ports at f0f0 [size=8]
I/O ports at f0e0 [size=4]
I/O ports at f020 [size=32]
Memory at fe405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev
04)
Subsystem: Device 1b0a:00c7
Flags: medium devsel, IRQ 5
Memory at fe404000 (32-bit, non-prefetchable) [size=256]
I/O ports at f000 [size=32]
Kernel modules: i2c-i801
01:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
Subsystem: Device 1a3b:2c37
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fe200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
02:00.0 Multimedia controller: Broadcom Corporation Device 1615
Subsystem: Broadcom Corporation Device 1615
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at fe000000 (64-bit, non-prefetchable) [size=64K]
Memory at fd800000 (64-bit, non-prefetchable) [size=8M]
Capabilities: <access denied>
On Fri, Dec 3, 2010 at 12:24 PM, Angus Gratton <gus at projectgus.com> wrote:
> On Fri, 2010-12-03 at 11:18 +1100, Sanders King wrote:
> > - I don't trust Pioneer when it comes to after-sales support. They've
> > lost me as a customer for ever.
>
> If what you've said is accurate, I imagine you may have a statutory
> right to a refund under the "goods must be fit for their purpose"
> requirements of the Trade Practices Act.
>
>
> > - Has anybody actually got the touch screen working on the Pioneer L11
> > with Linux? Is there any chance at all?
>
> As Bob says, if it works with Android then the kernel modules exist so
> it must be possible at some level.
>
> Is there any chance you can post the output of dmesg & 'lspci -v' from
> Ubuntu?
>
> - Angus
>
>
More information about the linux
mailing list