[clug] AverTV Duo Hybrid PCI-E linux driver?

[Eyal Lebedinsky]

Thanks Paul but I know that it did not come up.

My search so far (as of Dec 08) suggests that this card uses the saa7162E which did not have a mainstream
driver then. I built the one from [I forget] and it did not pick the card either.

Internally (silkscreen) it is model A177.

Eyal

http://www.nxp.com/#/aip/aip=[aip=322]|pp=[t=aip,i=322]
http://www.nxp.com/#/pip/pip=[pip=SAA7162E_SDS_2]|pp=[t=pip,i=SAA7162E_SDS_2]

Paul wrote:
> check the messages log and /dev/dvb it should have 2 adapters present
> also grep for "dvb" in your /var/log/dmesg
> eg
> 
>  grep dvb /var/log/dmesg
> cx88/2: cx2388x dvb driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: dvb access: shared
> 
> 
> you might like to check out www.linuxtv.org
> 
> Paul
> 
> On 14/02/2009 1:11 PM, Eyal Lebedinsky wrote:
>> I have this card and want to use the two DVB-T tuners. The machine 
>> runs F10/x86_64.
>>
>> Which driver(s) handles this card?
>>
>> TIA
>>
>> lspci
>> =====
>> 01:00.0 Multimedia controller: Philips Semiconductors Pinnacle PCTV 
>> 3010iX Dual Analog + DVB-T (VT8251 Ultra VLINK Controller) (rev 01)
>>         Subsystem: Avermedia Technologies Inc Device 011c
>>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>         Latency: 0, Cache Line Size: 32 bytes
>>         Interrupt: pin A routed to IRQ 11
>>         Region 0: Memory at f3000000 (64-bit, non-prefetchable) [size=1M]
>>         Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ 
>> Count=1/32 Enable-
>>                 Address: 0000000000000000  Data: 0000
>>         Capabilities: [50] Express (v1) Endpoint, MSI 00
>>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
>> <256ns, L1 <1us
>>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
>> Unsupported-
>>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
>> AuxPwr- TransPend-
>>                 LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
>> Latency L0 <4us, L1 <64us
>>                         ClockPM- Suprise- LLActRep- BwNot-
>>                 LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- 
>> Retrain- CommClk-
>>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- 
>> SlotClk- DLActive- BWMgmt- ABWMgmt-
>>         Capabilities: [74] Power Management version 2
>>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>> PME(D0+,D1+,D2+,D3hot-,D3cold-)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>         Capabilities: [80] Vendor Specific Information <?>
>>         Capabilities: [100] Vendor Specific Information <?>
>>
>> lshal
>> =====
>> udi = '/org/freedesktop/Hal/devices/pci_1131_7162'
>>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_29c1'  (string)
>>   info.product = 'Unknown (0x7162)'  (string)
>>   info.subsystem = 'pci'  (string)
>>   info.udi = '/org/freedesktop/Hal/devices/pci_1131_7162'  (string)
>>   info.vendor = 'Philips Semiconductors'  (string)
>>   linux.hotplug_type = 2  (0x2)  (int)
>>   linux.subsystem = 'pci'  (string)
>>   linux.sysfs_path = 
>> '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
>>   pci.device_class = 4  (0x4)  (int)
>>   pci.device_protocol = 0  (0x0)  (int)
>>   pci.device_subclass = 128  (0x80)  (int)
>>   pci.linux.sysfs_path = 
>> '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
>>   pci.product_id = 29026  (0x7162)  (int)
>>   pci.subsys_product_id = 284  (0x11c)  (int)
>>   pci.subsys_vendor = 'Avermedia Technologies Inc'  (string)
>>   pci.subsys_vendor_id = 5217  (0x1461)  (int)
>>   pci.vendor = 'Philips Semiconductors'  (string)
>>   pci.vendor_id = 4401  (0x1131)  (int)
>>
> 


-- 
Eyal Lebedinsky	(eyal at eyal.emu.id.au)