[clug] AverTV Duo Hybrid PCI-E linux driver?
Paul
mylists at wilsononline.id.au
Sat Feb 14 03:58:39 GMT 2009
check the messages log and /dev/dvb it should have 2 adapters present
also grep for "dvb" in your /var/log/dmesg
eg
grep dvb /var/log/dmesg
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
you might like to check out www.linuxtv.org
Paul
On 14/02/2009 1:11 PM, Eyal Lebedinsky wrote:
> I have this card and want to use the two DVB-T tuners. The machine runs
> F10/x86_64.
>
> Which driver(s) handles this card?
>
> TIA
>
> lspci
> =====
> 01:00.0 Multimedia controller: Philips Semiconductors Pinnacle PCTV
> 3010iX Dual Analog + DVB-T (VT8251 Ultra VLINK Controller) (rev 01)
> Subsystem: Avermedia Technologies Inc Device 011c
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f3000000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+
> Count=1/32 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [50] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <256ns, L1 <1us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <4us, L1 <64us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain-
> CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [74] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [80] Vendor Specific Information <?>
> Capabilities: [100] Vendor Specific Information <?>
>
> lshal
> =====
> udi = '/org/freedesktop/Hal/devices/pci_1131_7162'
> info.parent = '/org/freedesktop/Hal/devices/pci_8086_29c1' (string)
> info.product = 'Unknown (0x7162)' (string)
> info.subsystem = 'pci' (string)
> info.udi = '/org/freedesktop/Hal/devices/pci_1131_7162' (string)
> info.vendor = 'Philips Semiconductors' (string)
> linux.hotplug_type = 2 (0x2) (int)
> linux.subsystem = 'pci' (string)
> linux.sysfs_path =
> '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string)
> pci.device_class = 4 (0x4) (int)
> pci.device_protocol = 0 (0x0) (int)
> pci.device_subclass = 128 (0x80) (int)
> pci.linux.sysfs_path =
> '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string)
> pci.product_id = 29026 (0x7162) (int)
> pci.subsys_product_id = 284 (0x11c) (int)
> pci.subsys_vendor = 'Avermedia Technologies Inc' (string)
> pci.subsys_vendor_id = 5217 (0x1461) (int)
> pci.vendor = 'Philips Semiconductors' (string)
> pci.vendor_id = 4401 (0x1131) (int)
>
More information about the linux
mailing list