[clug] Mythtv - hauppauge Nova 500 ubunutu 8.04

[Paul]

I assume you have it connected to an antenna?
this is the output I get.


[root at mythbox ~]# dvbscan /usr/share/dvb/dvb-t/au-Canberra-Black-Mt
scanning /usr/share/dvb/dvb-t/au-Canberra-Black-Mt
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 205500000 1 3 3 3 1 1 0
initial transponder 226500000 1 2 9 3 1 2 0
initial transponder 219500000 1 3 9 3 1 1 0
initial transponder 177500000 1 3 1 3 1 1 0
initial transponder 543500000 1 2 9 3 1 2 0
 >>> tune to: 
205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0210: pmt_pid 0x0102 ABC -- ABC HDTV (running)
0x0000 0x0211: pmt_pid 0x0100 ABC -- ABC1 (running)
0x0000 0x0212: pmt_pid 0x0101 ABC -- ABC2 (running)
0x0000 0x0213: pmt_pid 0x0103 ABC -- ABC1 (running)
0x0000 0x0214: pmt_pid 0x0106 ABC -- ABC3 (running)
0x0000 0x0216: pmt_pid 0x0104 ABC -- ABC DiG Radio (running)
0x0000 0x0217: pmt_pid 0x0105 ABC -- ABC DiG Jazz (running)
....


On 24/09/2008 12:43 PM, Mike J wrote:
> i tried setting up the conf as per some instructions i found
> 
> scan dvb-t/au-Canberra > channels.conf
> 
> Which reports tuning failed.
> 
> I'll look into mplayer and dvbscan.
> 
> I'm also going to be purchasing a digital coax to amp cable but its on the Realtek ALC1200 if that helps your question you posted? 
> i can let you know if the sound outputs correctly.
> 
> Thank you.
> 
> 
>  > Date: Wed, 24 Sep 2008 12:13:04 +1000
>  > From: mylists at wilsononline.id.au
>  > To: astro_mikel at hotmail.com
>  > CC: linux at lists.samba.org
>  > Subject: Re: [clug] Mythtv - hauppauge Nova 500 ubunutu 8.04
>  >
>  > Have you got a channels.conf file? if so you could try using mplayer 
> to test it out.
>  >
>  > eg mplayer -msglevel all=6 dvb://2@"WIN TV Canberra"
>  >
>  > where "2" = the card/adapter#+1 eg 0=1 and 2=1
>  >
>  > also you can using dvbscan as well.
>  >
>  > Paul
>  >
>  > On 24/09/2008 10:53 AM, Mike J wrote:
>  > > Hello,
>  > >
>  > > Anyone out there using the hauppauge nova-t 500 tuner card with hardy?
>  > >
>  > > I can see the load loaded in lsmod and lsusb but it doesn't detect 
> in mythtv, i can see the device in /dev/dvb/adapter0 and adapter1
>  > >
>  > > Using the "scan" just fails "tuning failed" for each station.
>  > >
>  > > Just curious to know if you have to compile a driver for it?
>  > >
>  > > Any help would be appreciated.
>  > >
>  > > Thank you.
>  > >
>  > > _________________________________________________________________
>  > > Are you a friend magnet? Play now to win prizes for you and your 
> friends!
>  > > 
> http://clk.atdmt.com/GBL/go/106906016/direct/01/?href=http://www.friendmagnet.com.au-- 
> 
>  > > linux mailing list
>  > > linux at lists.samba.org
>  > > https://lists.samba.org/mailman/listinfo/linux
>  > >
>  >
> 
> ------------------------------------------------------------------------
> Sell your car for just $40 at CarPoint.com.au It's simple! 
> <http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Fsecure%2Dau%2Eimrworldwide%2Ecom%2Fcgi%2Dbin%2Fa%2Fci%5F450304%2Fet%5F2%2Fcg%5F801459%2Fpi%5F1004813%2Fai%5F859641&_t=762955845&_r=tig_OCT07&_m=EXT>