PB NIS+ with Redhat 7.0 on Bi-processor Pentium III

[Bob Edwards]

Usually, "Error in RPC subsystem" is caused by the clocks on the client
and server not being sync'd properly. Run "ntpdate" or similar to ensure
that the two machines are sync'd to within milliseconds (seconds is OK
for NIS+)

Cheers,

Bob Edwards.

linuxos wrote:
> 
>     hello,
> 
> I ask you to excuse me for my english, it's very difficult for me.
> 
> I have a problem when i want to use NIS+ on a DELL WS 420 with 2 Processors Pentium III
> 
> The configuration is:       tested on Redhat 7.0 and Suse 7.0,   Nis+ 1.4.
> 
> I sure the server is OK because i have tested it with a true Sun client ( Ultra 1).
> 
> Tests make:        1- Redhat 7.0 + DELL WS420       Bi-processor Pentium III    1Ghz     Kernel 2.2.16-22smp
> 
>                                                     Befor a keylogin:                        nisls        =>    OK
>                                                                                                             niscat     =>    OK
> 
> 
>                                                     After keylogin:                            nisls        =>    Error in RPC subsystem
>                                                                                                              niscat    =>    Error in RPC subsystem
> 
>                                 2- Redhat 7.0 + DELL WS420       Bi-processor Pentium III    1Ghz     Kernel 2.2.16-22    Second Processor Disabled
> 
>                                                     Befor a keylogin:                        nisls        =>    OK
>                                                                                                             niscat     =>    OK
> 
> 
>                                                     After keylogin:                            nisls        =>    Error in RPC subsystem
>                                                                                                              niscat    =>    Error in RPC subsystem
> 
> 
> 
>                                 3- Suse 7.0 + DELL WS420       Bi-processor Pentium III    1Ghz     Kernel 2.2.18smp
> 
>                                                     Befor a keylogin:                        nisls        =>    OK
>                                                                                                             niscat     =>    OK
> 
> 
>                                                     After keylogin:                            nisls        =>    Error in RPC subsystem
>                                                                                                              niscat    =>    Error in RPC subsystem
> 
> 
>                                  4- Redhat 7.0 + DELL GX110        Mono-processor  Pentium III    800Mhz       Kernel 2.2.16-22
> 
>                 ALL is ok
> 
>            4- I put the harddrive of the DELL WS420 with the Redhat 7.0 + Nis 1.4
> 
>                 on the DELL GX110 and after remove the /etc/.rootkey and remake a keylogin -r,  ALL
> 
>                 is OK...
> 
>             To finish, after all possibles tests, I think the problem is to create the encrypted Key
> 
>             on a Bi-processor Pentium III. Did the mp.so library is the problem ????
> 
> 
> 
>  Does anyone know, what's the real problem?
> 
>   Thanks for any help,
> 
> --
> Olivier
> 
>