your mail

[Richard Furda]

	Hello,


> It looks like tha I have the same problem as you have

Yes, I encountered very similar problems but under FreeBSD.
I doubt it has anything to do with the OS, but my thread
has been either ignored or missed.
 
> I just posted:
> "
> I am running samba 2.07 on linux (suse7).
> Client is Win98se both on 100MbitFD (auto)
> Testing with a 85MB File
> reading is ~4MB/sec
> writeing is ~0.5MB/sec
> after the writing a lot transfer errors are shown
> by "ifconfig eth0"
> eth0      Link encap:Ethernet  HWaddr 00:03:6D:13:7F:AF
>            inet addr:10.10.1.10  Bcast:10.10.1.255  Mask:255.255.255.0
>            inet6 addr: fe80::3:6d13:7faf/10 Scope:Link
>            inet6 addr: fe80::203:6dff:fe13:7faf/10 Scope:Link
>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>            RX packets:152178 errors:6733 dropped:0 overruns:6733 frame:6733
>            TX packets:160029 errors:3 dropped:0 overruns:3 carrier:0
>            collisions:0 txqueuelen:100
>            Interrupt:12 Base address:0x2000
> 
> same file transfered with ftp r/w ~3.5MB/sec.
> "
> My NIC is a Linksys (Tulip) card.

You seem to have a lot of errors which could very possibly be because of
bad cabling or a lot of crosstalk. You also seem to have 'zero'
collisions, thus using a Layer2 switch, or is it crossover?


	Richard