答复: 答复: help me on samba with IPv6
Goey Xiao (goeyx)
goeyx at cisco.com
Wed Mar 21 23:47:25 MDT 2012
Hi ,all
Thanks all of you to help me solve problem and keep very good patience to show me the step one by one , there is no word to express my appreciating, thanks a lot
Thanks a lot
Goey
发件人: David Holder [mailto:david.holder at erion.co.uk]
发送时间: 2012年3月22日 3:13
收件人: Michael Wood
抄送: Goey Xiao (goeyx); samba-technical at lists.samba.org; Stone Shi (jiashi)
主题: Re: 答复: help me on samba with IPv6
Thanks Michael, I didn't look at the earlier lines.
Goey,
1) Can you access this share over IPv4?
2) Can you ping this IPv6 address (you will need to allow ICMPv6 echo through your firewall, by default they are blocked).
David
________________________________
Dr David Holder CEng FIET MIEEE
Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
Reception: +44 (0)1422 207000
Direct Dial: +44 (0)131 2026317
http://www.erion.co.uk
Registered in England and Wales. Registered Number 3521142
Registered Office: Crutes House, University Boulevard, Teesdale Park, Stockton on Tees, TS17 6EN, UK
VAT Number: GB 698 3633 78
On 21/03/2012 16:06, Michael Wood wrote:
2012/3/21 David Holder <david.holder at erion.co.uk>:
Hi Goey,
You need to specify the resource ;-)
\\Server\Resource
It looks to me like he did. The first two times he tried the following:
net use x: \\2001-db8-cafe-67--4.ipv6-literal.net\data
Only the third time did he try without the resource.
In all three cases he got "System error 67 has occurred.\n\nThe
network name cannot be found."
Best Regards,
David
------------------------------------------------------------------------
Dr David Holder CEng FIET MIEEE
Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
Reception: +44 (0)1422 207000
Direct Dial: +44 (0)131 2026317
http://www.erion.co.uk
Registered in England and Wales. Registered Number 3521142
Registered Office: Crutes House, University Boulevard, Teesdale Park,
Stockton on Tees, TS17 6EN, UK
VAT Number: GB 698 3633 78
On 21/03/2012 14:04, Goey Xiao (goeyx) wrote:
Hi ,david
I encounter new problem in debug ,which win2008 can not understand the
command ,the details at below:
Could you please help me on it , any suggestions please
Thanks a lot
Goey
*发 件人:*David Holder [mailto:david.holder at erion.co.uk]
*发 送时间:*2012年3月20日19:02
*收件人:*Goey Xiao (goeyx)
*抄送:*samba-technical at lists.samba.org; Stone Shi (jiashi)
*主题:*Re: help me on samba with IPv6
Hi Goey,
Try my presentation from Samba XP 2011 as a starting place. See
http://www.ipv6consultancy.com/ipv6blog/wp-content/uploads/sambaxp2011deployingsambainipv6networks.pdf.
Best Regards,
David
------------------------------------------------------------------------
Dr David Holder CEng FIET MIEEE
Erion Ltd, An Cala, Inverkirkaig, Lochinver, Sutherland, IV27 4LR, UK
Reception: +44 (0)1422 207000
Direct Dial: +44 (0)131 2026317
http://www.erion.co.uk
Registered in England and Wales. Registered Number 3521142
Registered Office: Crutes House, University Boulevard, Teesdale Park,
Stockton on Tees, TS17 6EN, UK
VAT Number: GB 698 3633 78
On 20/03/2012 09:46, Goey Xiao (goeyx) wrote:
Hi all
Could you please help me on question that how to set up samba
with ipv6 and provide IPv6 service to pc with OS win2008, the samba
version is (samba-winbind-clients-3.5.10-114.el6.i686
samba-3.5.10-114.el6.i686,samba-common-3.5.10-114.el6.i686), I am very
expect to receive your feedback
thanks a lot
Goey
More information about the samba-technical
mailing list